2007 Jeep Liberty "cabin air filter"

Рет қаралды 52,904

6 жыл бұрын

This is a very quick video to show you how to access the OEM "cabin air filter" on a 2007 Jeep Liberty. I am saying cabin air filter sarcastically because it only filters out leaves and other large debris.
It can easily become almost completely blocked, and I would recommend that you should check it every couple 10k miles and clear any buildup that may be present.
All you will need is a small prying implement, a 10 and a 15mm socket, a plastic rivet removal tool (aka pliers), some critical thinking skills, and 20 minutes or so of your life.
This is a quick and dirty video explaining the broad strokes of how it's done. It is not complicated and there are no secret tricks. If you need a step-by-step walk through, you should not be undertaking this extraordinarily simple project.

Пікірлер: 22

@terryiverson8355 5 жыл бұрын

So can I just pop it up like that or do I need to remove the wipers??

@lazychris2000 5 жыл бұрын

It's hard to work in that tight of an area if you don't and you might break the plastic, but you are not required to remove the wipers

@Taniesha__ Жыл бұрын

Does anyone know if a 2006 have a cabin air filter? I called my local car dealership & they stated I don’t have one for my car model

@lazychris2000 Жыл бұрын

The dealership answered your question....

@evelynturkington942 4 жыл бұрын

Did this for my 2008 Jeep Liberty...no filter...no access by glove compartment either! 🤦🏼‍♀️

@evelynturkington942 3 жыл бұрын

It seems the car I own it was not included for that year and model!

@teresawenzel8719 5 жыл бұрын

Why the heck is the cabin air filter a huge process to replace?! Most vehicles have it located in the glove compartment

@lazychris2000 5 жыл бұрын

On paper, it doesn't have a cabin air filter. I hacked one together to install in my rig ;)

@gregrn779 3 жыл бұрын

@@lazychris2000 I curious how you “hacked it together “. I just bought the cabin air filters on line to now realize my 07 doesn’t have the housing for it 😕🤔. I was thinking about creating/fabricating something that would work under the box screen. But would be interested to know how you made yours. Maybe you could do a quick video, or if not I would be open to any suggestions. Thank you.

@lazychris2000 3 жыл бұрын

@@gregrn779 won't be able to get a video until the snow melts and it warms up, but I did find a picture of what I did. Basically bought that cabin filter in the picture, cut it to the right length and used some silicone to hold it in place. photos.app.goo.gl/koghp3docRnG6bo19

@motavice3499 2 жыл бұрын

Same process for a Ford escape too, it's a terrible design for something that is supposed to be changed yearly

@nerypargas3358 3 жыл бұрын

Can you explication"s spanish please.

@lazychris2000 3 жыл бұрын

No hablo espanol muy bueno, pero es possible puedo escribir instructiones para usted. Necesito tiempo para trabajar en esto

@justchillingbuddyify 2 ай бұрын

JEEP LIBERTY 2002-2007 = 1ST GENERATION ALL OF THEM SAME THING

@Hicaliber1 4 жыл бұрын

Gotta like the no show all tell vids....not.

@lazychris2000 4 жыл бұрын

Always happy to help people who are able to apply some critical thinking and figure out what to do without having to be spoon-fed every minute detail!