2009 - 2013 Toyota Corolla Radio Install

Рет қаралды 376,842

7 жыл бұрын

Parts linked in the description below!
Watch a full tutorial as a 2010 Toyota Corolla will have a Pioneer MVH-X380BT Single Din Bluetooth Radio installed. This new head unit offers bluetooth, Aux, USB, and AM/FM with better power output for better bass response and sound quality.
This video applies to Toyota Corolla models for years 2009, 2010, 2011, 2012, and 2013. This video includes wiring, dash trim and stereo removal, complete installation for the radio, and testing!
For the unboxing of this radio, click here:
• Pioneer MVH X380BT Sin...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this install (Amazon Associate Paid Links):
*Pioneer MVH-X280BT (Discontinued)
---Recommended Radio: amzn.to/2SMLt07
*Metra 70-1761Wiring Harness (no JBL / Amplified Models): amzn.to/3z8PT1y
*Metra 99-8223 Dash Kit (Single Din Only): amzn.to/3gQAWsC
----For Double Din Radios, use Metra 95-8223S: amzn.to/3zEFXx6
Factory AUX Retention Harness Metra 70-8114: amzn.to/356ZIzz
Note: If you have the JBL Sound System and Steering Wheel volume controls, use the wiring harness Crux SWRTY-61J (Amazon Associate Paid Links): amzn.to/2T1yw2m
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 173

@ProvoBeastAudio 3 жыл бұрын

Parts linked in the description!

@psychacia3476 4 жыл бұрын

You say it's "just some clips" like these damn things aren't the spawn of Satan, having had my rant, thank you immensely for the informative video. You're a blessing.

@rodneycooperjr3223 6 жыл бұрын

This video is great. Very informative, but maybe we need a version of this "for dummies". There were several areas in which you kind of said, "Now all you have to do is 'this'", and then you'd cut away and it's done, like crimping the wires, or removing the panels on the car, or moving the shifter without actually shifting the gear. It would be nice to see how all of that was done, but the video was still great.

@xav1er512xo 4 жыл бұрын

agree

@xav1er512xo 4 жыл бұрын

most of the times its better to make sure the sterio works before you put it all back together.

@SraTacoMal 2 жыл бұрын

I'm sure you know by now, but for anyone else who comes here wondering: For moving the shifter, FIRST MAKE SURE YOUR PARKING BRAKE IS ACTIVATED OR YOU'LL BE PAYING DAMANGES, DRIVING TO THE EMERGENCY ROOM AND/OR CALLING THE CORONER. You need a flathead screwdriver (or something similar). On many cars (or at least Toyotas), there should be a little rectangular cover you never noticed before near your shifter. Put the screwdriver in the slot and use it to pry it off. AGAIN, MAKE SURE THE PARKING BRAKE IS ACTIVE. NO ONE AND NOTHING NEEDS TO BE MAIMED BECAUSE YOU MOVES A TINY PLASTIC RECTANGLE. To shift gears, press inside the hole (you can use the screwdriver to press), and you should be able to move the shifter freely. And your car shouldn't move, because you listened to my yelling that the parking brake should be active. 📣 OH, AND BEFORE YOU LEAVE THE CAR, MAKE SURE TO PUT THE CAR BACK INTO PARK. Up to you to weigh the risk of leaving out the rectangle while the car is in gear to remind yourself to put it back into park, only to lose it and have your 5-year-old put the car into neutral with no parking brake a month later, and putting it back while working and potentially getting a "surprise" when you or the next person to drive your car releases the parking brake without their foot on the brake.

@tonyvera1234 Жыл бұрын

Any "for dummies" dummier than this very practically explained will need to come with a warning ⚠️ 😜

@azndoodle1 3 жыл бұрын

Thanks for highlighting the blue wire. After matching all colors the solid blue was left and I thought I messed up, but thanks for identifying that it may not be used.

@yvonnegavigan9285 6 жыл бұрын

Thank you for doing this video! I installed my first radio!!!! And it works!

@ProvoBeastAudio 6 жыл бұрын

Happy to help! Subscribe!

@0flyswatter0 6 жыл бұрын

I have to do this next week. This video helps a lot.

@nolongeractive5952 3 жыл бұрын

Thanks, this helped me easily install one in my daughter's car.

@adilakhtarghani6848 3 жыл бұрын

Thank you. Your video saved me 80$. 😀. Best video for radio installation. 👍

@dougnohu 7 жыл бұрын

could you do a video on 2010 toyota corolla installing aftermarket front and rear speakers including tweeters.... as this is the best video ive seen so far covering a toyota corolla 09 - 13 models

@ProvoBeastAudio 7 жыл бұрын

Thanks buddy. This was a customer vehicle, but if i get another customer who wants speakers done on a corolla, i will for sure grab some footage for ya.

@albertcole8590 4 жыл бұрын

Dougnohu, are ur tweeters connected to the speakers or are the separate?

@begonafernandez7602 5 жыл бұрын

Thanks for the video!! It´s helped me really much.

@LeonardVGS 4 жыл бұрын

Thank you, very helpful

@chippy3197 4 жыл бұрын

Nice video, I'm thinking of installing a radio myself

@R.E.HILL_ 7 жыл бұрын

how about the steering wheel controls?

@johnnytable5517 5 жыл бұрын

awesome video! thanks!

@alizafar1194 3 жыл бұрын

Very helpful!! Thanks 😊

@texasboiroi 4 жыл бұрын

Great video!

@sgbawg0 8 ай бұрын

I bought an aoto for my 2000 isuzu rodeo a few years ago. It works but is slow AF, so the only thing it's good for is Bluetooth pairing with my phone to play music.

@tod670 4 жыл бұрын

Can you still use the buttons on the driving wheel for changing song and volume???

@firstdown80 5 жыл бұрын

Great video. About to do the same on my son’s Corolla. Why do you remove the bottom piece at the gear shift. It wasn’t clear if you remove vex any wiring.

@bumirock1 2 жыл бұрын

Thank you for the video

@RaymondLugo 6 жыл бұрын

Hi, can you please help me out? I need the measurements of that radio cover, I mean, the dimensions of the hole? I'm planning on putting a tablet in the dash using the dash kit for the corolla but I want to make sure that the actual screen of the tablet fits into the hole. I would appreciate it, thanks!

@tonylee2554 4 жыл бұрын

Awesome video. Just to clarify the stock wiring connections, at 5:33, what the other two harnesses that you don't use? Are they not necessary?

@PlymouthVT Жыл бұрын

Thanks for the part numbers dude!

@savio1172 4 жыл бұрын

Great video.. Did you guys use the Pioneer radio trim ring or the metra trim ring for this installation? Also, I have the same metra wiring harness that was already connected to an old Pioneer deck harness from 2004 on my 98 Toyota corolla. Would I be able to just re-use the old wiring harness on a new Pioneer deck with my 2010 Toyota Corolla LE? In other words are the current Pioneer harnesses different from the ones going back to 2004?

@LosJoelos 5 жыл бұрын

Great guide mate, one thing I'd do is test the stereo is working before putting the whole dash back together

@faisalahmed1982 3 жыл бұрын

Nice head unit! Love the blue hue! What model is it? Thank u 👍

@Syncopator 2 жыл бұрын

Are there alternative placements for the microphone? I'm a bit nervous about messing with the side airbag and routing the cable around it.

@chaseryan91 5 жыл бұрын

Do you need the wiring harness, I’m planning to get this stereo but I was gonna take it to a shop for installation

@mrhernandez739 9 ай бұрын

Good video

@sampotucek2415 2 жыл бұрын

This is a great video but I wired everything up and it works but only one speaker plays when connected to Bluetooth and the other speaker plays when i have my aux in do you know what could be wrong?

@Stevenhdez04 6 жыл бұрын

Does yours make any startup noise? And how long does yours take start playing Bluetooth audio automatically? I think something is wrong with mine...

@jorgejaime4325 4 жыл бұрын

Be careful removing the vents and nake sure they're pulled straight towards you. Mine broke two clips because I pulled it a little bit up (I glued them together) The shifter thing unnecessary I ordered matra wiring and Scosche TA2101B KIT ($11) for 2009 model The steering wheel buttons need an extra adaptor

@nathanlewis5682 2 жыл бұрын

I have the 2011 Corolla LE trim. I don't know if my factory radio has the amp, where would I look to confirm if there's an amp for the radio? My factory radio sounds like it's about to quit. I think it's about time for an upgrade. siriusxm radio and a reverse view camera.

@aneekadanielly2729 5 жыл бұрын

Can you a single din install for a Honda Accord??

@bumzini4467 3 жыл бұрын

Willl this work on the Toyota Auris ...

@franciscocornejo6420 3 жыл бұрын

I did this install and my car does not lock nor unlock remotely with my key anymore. However, the key works again once I put the factor radio back in. Any advice?

@vincentxiong16 3 жыл бұрын

Hello, Anyone who have the base model and is using the metra 170-1761 harness, are you experiencing any whining noise coming from the rear/backseats of the car? I am using a Dual XDVD269BT with this metra harness, and after connecting all the wires from the harness to the Aftermarket Radio harness, I am not using the SWC cable, illumination wire, reverse wire, and brake wire, as well as the dimmer wire on the metra harness. The radio works fine, sound is good, but I get this whining noise with acceleration the ground wire (black) from the aftermarket radio is spliced onto the metra harness, and it just plugs into the the car cables, using two of them cable instead of the original four.

@nephtaliealius7647 4 жыл бұрын

Did you disconnect your battery?

@seriouslyIamnobody 7 жыл бұрын

Thank you for the showing the walkthrough video. Ironoically you just have a same car that I have. Do you mind uploading a walkthrough video for reverse camera? Thank you.

@ProvoBeastAudio 7 жыл бұрын

Unfortunately, this was a customer vehicle and don't have access to it anymore.

@alicem456 4 жыл бұрын

Where can I get the side bit for new stereo

@NoName-hr8vt 4 жыл бұрын

Does it work with the steering buttons?

@andythao7880 Жыл бұрын

Why need to remove the bottom part when you only work on the top? Is it required in order to remove remove the top?

@albertojmoreno6804 Жыл бұрын

How can you control this stereo with the steering?

@jefforr4488 2 жыл бұрын

is there a radio that works with the steering wheel controls

@leacysean 4 жыл бұрын

Would this work in an 2008 Toyota auris

@running_bear623 7 жыл бұрын

actully those devices mutch strong than the screens

@savio1172 4 күн бұрын

In the Metra instructions for the dash kit it says "Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure C)". I noticed in your video you didn't use the ISO brackets? You used the supplied radio sleeve? Also, in the instructions it mentions "Snap the trim plate onto the front of the radio housing. (Figure D)". I noticed you didn't use that?

@akmmahmudulhaque6617 3 жыл бұрын

Hi, Thanks for the video. I am looking for a good multimedia system for my 2010 Toyota corolla hatchback. I would like to have, wifi+gps+reverse camera. Apply id would be bonus. Could be plz recommend me one which fit with my car with good quality but not too expensive. Thank you.

@danieldellagala336 4 ай бұрын

What dash kit did you get

@SpecialksVideoChannel 4 жыл бұрын

do you need a module for a toyota corrolla le 13

@khalidaasar5430 5 жыл бұрын

is it fit on corolla 2005???

@inmyworldxoxo5601 7 жыл бұрын

i have the same exact car as you. my radio keeps malfunctioning after a year of service it begins with the same problem. so annoying! im. annoyed that i had to pay them again for my stupid touch screen radio that it came with. i might just have to install a basic little radio.

@rainystorm88 6 жыл бұрын

inmyworld xoxo that stock radio is a piece of junk! Mine ejects the disc when I try to change radio channels.... >.>

@mollyy.2x184 3 жыл бұрын

Does it have aux connected to it?

@jordankomakech5137 3 жыл бұрын

What tool is that the extension one

@edgarrobles1070 5 жыл бұрын

Dónde puedo conseguir la base en Zacatecas

@hashimbaba3380 7 жыл бұрын

is there possibility to fit ipad mini in this Toyota model please post the video, nice video and subscribed..

@ProvoBeastAudio 7 жыл бұрын

Great question, not sure. I unfortunately don't have the car anymore as this was a customer vehicle but it wouldn't hurt to give it a shot.

@tasdin11994 7 жыл бұрын

I have to replace the Starter relay(on my 2010 corolla) which according to some threads is behind the Radio/AC controls. Do you remember seeing a relay block behind the radio?

@ProvoBeastAudio 7 жыл бұрын

Nope, sorry!

@thejoey993 Жыл бұрын

My still doesnt work. Amp wont power the subwoofer. Im lost 😭

@mmesmile 7 жыл бұрын

how can i get the steering wheel remote to work with an aftermarket radio? and what about the AUX port that is already installed in the panel(below the shifter.) i have a 2009 toyota matrix.

@ProvoBeastAudio 7 жыл бұрын

You will need a separate adapter to retain the steering wheel control module. Usually we use the Metra Axxess ASWC-1 to retain those features. It also depends if your new aftermarket radio is compatible with the steering wheel controls. You can retain the aux port, but depends on the wiring adapter you use and the new radio you have chosen.

@seangarrity9285 4 жыл бұрын

Thinking of replacing stock radio, mainly to have blue tooth. According t manual, there is a microphone built into the headliner, it's in the overhead light console in front of the lights. It's visible, 3 slots like the manual shows. Can that be used instead of the added one to run wires? Thanks

@ProvoBeastAudio 4 жыл бұрын

Usually they are on a protected circuit, so integration is generally almost impossible. Unless you are good with small electrical components, it is easier just to run a new mic.

@alecbrown5036 6 жыл бұрын

Hey man just did my 2010 Corolla s, orederd kit and wire set off amazon and Ken wood deck from my work. Looks and sounds great! This video was the best one out there by far. Just one question, there was an orange wire for “steering wheel controls” but there was no matching colour for it. What would I do for that ?

@ProvoBeastAudio 6 жыл бұрын

If you have steering wheel volume controls, that wire is for that use. If you don't have that feature quipped, it will not be used.

@alecbrown5036 6 жыл бұрын

Provo Beast Audio Installation. Thank you for replying, but I wanted to know what wire to crimp it too cuz there wasn’t one to support it but I have the controls

@ProvoBeastAudio 6 жыл бұрын

Is the orange wire on the aftermarket radio's harness?

@alecbrown5036 6 жыл бұрын

Provo Beast Audio Installation. Yes I believe so but I tied it into the matching orange for factory harness, would I tie the three in together ?

@ProvoBeastAudio 6 жыл бұрын

No, you may need an adapter module (like the aswc-1) or check with the stereo manufacture for wiring. Some units you can connect directly, some you cannot.

@Joe_1971 6 жыл бұрын

I just bought a 2009 Corolla xrs and it came with the JBL factory head unit but it doesn't sound good. Now I haven't tried a cd on it yet cause I just got the car today but the radio sounds crappy and the reception is terrible. If I was to replace the head unit with something along the lines of a Pioneer like in this video or a double din unit with the big screen, will it power any factory amplifiers that may be a part of that JBL system. The speakers in the back have pretty big magnets so I'm assuming it's got some power handling capability.

@ProvoBeastAudio 6 жыл бұрын

Well, if you upgrade the radio, the adapter harness needed would utilize your new radio's RCA outputs. Generally speaking, aftermarket radios do allow more customizability, eq, and adjustments needed, so you may find a better sound with the upgrade. Head over to sonic electornix and use their vehicle fit guide to ensure you get the right parts. Use coupon code ProvoBeast to get 5% off a checkout.

@nickcallender4744 7 жыл бұрын

im installing the same radio on my 99 accord ..can i just use the wires from the new radio to the original wiring or do i have to get the new harness?

@ProvoBeastAudio 7 жыл бұрын

Well, if you get the new harness adapter, you will not have to cut and identify the factory wiring. The benefit of the harness is that is simplifies the wiring for only a few bucks. Check out Sonic Electronix for the list of harnesses compatible with your accord and use ProvoBeast code at checkout for a 5% discount.

@marioderas1175 7 жыл бұрын

My Factory AUX Port has a problem where I have to wiggle it and maintain the aux cable in a certain position for it to play out of all my speakers. If I install an aftermarket radio with a new AUX port on it, do you think I will continue having AUX issues and playback throughout all of my speakers?

@ProvoBeastAudio 7 жыл бұрын

No, the AUX issue is common for these model years. The new radio has an aux on the front of the radio itself which the old Factory aux will no longer be used. You will no longer have issues with it.

@nguyenvanduc2512 6 жыл бұрын

What is the last connector that you left out? Thanks

@ProvoBeastAudio 6 жыл бұрын

the old factory AUX. The new radio had the aux on the front panel, so no need to retain the old factory one.

@koolerpure 6 жыл бұрын

do you have to use that pasific dash kit or could you use another? i have the same radio but i installed it on a 2006 toyota corolla and can only find a dash kit that is double space and im wondering if i could use the same kit you have

@ProvoBeastAudio 6 жыл бұрын

Scosche makes one too for that year: www.amazon.com/SCOSCHE-TA2048B-2003-08-Corolla-Installation/dp/B0007KK2N8/ref=sr_1_2?ie=UTF8&qid=1526660437&sr=8-2&keywords=scosche+corolla+dash+kit&dpID=41DzFJulDDL&preST=_SX300_QL70_&dpSrc=srch

@koolerpure 6 жыл бұрын

perfect, thank you

@johnpaulnimer4304 5 ай бұрын

Hey bro where’d u wire ur remote wire too?

@ProvoBeastAudio 5 ай бұрын

Nothing, just cap it off. No amp to connect it to.

@rs69camaro 7 жыл бұрын

what harness adaptor is needed if you want to run an amp in the car for a subwoofer?

@ProvoBeastAudio 7 жыл бұрын

Any line out converter will work if you are running the factory radio. If you are running an aftermarket radio, no harness adapter is needed as aftermarket radio already has rca preouts for the amp and sub.

@satirical78 7 жыл бұрын

I'm perplexed by the extra two connectors that are going unused. What functions do those serve in the factory radio that wouldn't be needed in the aftermarket radio? That's a lot of wires to nowhere.

@ProvoBeastAudio 7 жыл бұрын

One unused harness was for the factory Aux which went bad, hence why the customer decided to replace the radio in the first place. The new radio has the Aux port on the front of the unit, which was why we decided not to retain it. The other typically is for speed-sensitive volume that the factory radio used, but wasn't needed on the new radio.

@ryandcoxson732 Жыл бұрын

does the volume switch still work on the steering wheel?

@ProvoBeastAudio Жыл бұрын

With the right parts, yes. This Corolla wasn't equipped with steering wheel volume controls. See the description of the video for those appropriate parts to retain those features.

@ZxIoIxZ 6 жыл бұрын

Hi I have a question . Will this dash kit work for 2007 model .? The inside of. Act. Is exactly the same. And I have pioneer deh-3200ub will this work no problems ? Regards Anton

@ZxIoIxZ 6 жыл бұрын

Or will I need to use Metra -99-8204 kit ?

@patricklawrence9784 6 жыл бұрын

I would have tested the stereo first before putting them trims back on! Great video though! Thanks!

@benjarenteria5380 6 жыл бұрын

For a double din we need the dash kit? it is the same size.

@ProvoBeastAudio 6 жыл бұрын

Double Din kit: Metra 95-8223

@410bmb 2 жыл бұрын

Why do you need wiring harness ? Why can't you use the one already there

@ProvoBeastAudio 2 жыл бұрын

Factory harness does not plug into an aftermarket radio, and we highly advise to never cut the factory radio harness for just a few bucks, it is totally worth it. Linked in the description of the video.

@Rist_Shot 2 жыл бұрын

You realize there’s a mic in the car already? It’s between the dome lights by the mirror

@jameslee5091 Жыл бұрын

Do I need to buy a separate frame?

@ProvoBeastAudio Жыл бұрын

Yes, we linked everything in the description!

@hssalvador 6 жыл бұрын

The original AUX input still working?

@ProvoBeastAudio 6 жыл бұрын

Nope, the new radio has an aux on the front of the radio. Also the original aux died anyways.

@DankestLankJOJO 6 жыл бұрын

Do you simply have to take off the vents by pulling the panel? Mines looks very tight and I am afraid to break something is i pull too strongly

@ProvoBeastAudio 6 жыл бұрын

Dont pull on the vents themselves, instead, pull on the top of the panel towards you.

@DankestLankJOJO 6 жыл бұрын

Provo Beast Audio Installation i figured it out already! But thanks for the Quick answer! You have a great channel!

@ProvoBeastAudio 6 жыл бұрын

Thanks. Subscribe!

@ProvoBeastAudio 7 жыл бұрын

This corolla didn't have them equipped, no need to install them.

@simeonkwan 7 жыл бұрын

What is the purpose of the wiring harness? Can't you hook up directly to the wires that come with the pioneer unit?

@simeonkwan 7 жыл бұрын

Nevermind I figured that out. Do you have a link to where you get these barrel connectors?

@ProvoBeastAudio 7 жыл бұрын

Any autoparts store has butt connectors or just search them on amazon

@DJBENVERA 5 жыл бұрын

Seemed like moving the lower panel with the shifter was not needed...? Why that extra step at the beginning?

@noreenosama9042 3 жыл бұрын

Sir..I have a question..I appreciate it if you answer ..cani I install 2016 Corolla sound panel in my Corolla 2010?

@ProvoBeastAudio 3 жыл бұрын

What is a sound panel?

@noreenosama9042 3 жыл бұрын

@@ProvoBeastAudio deck.. music system

@noreenosama9042 3 жыл бұрын

@@ProvoBeastAudio thank you so much for reply

@mmorales24 5 жыл бұрын

I tried this on my 2013 Corolla and there's a plastic band holding the radio down so it's impossible to take out :/

@mmorales24 5 жыл бұрын

Will D. Thanks so much for the tip! I went to a professional to get it removed, but I'll know next time. Save some money.

@taylorgaul1670 6 жыл бұрын

How long did this take to do

@ProvoBeastAudio 6 жыл бұрын

Between 1 - 2 hours depending on if you have all the parts and tools ready.

@stonerbeatsza9701 3 жыл бұрын

Does the radio come with the face and trim panels when i buy it? 😭😭😭😭cause i just had mine installed but they did a shitty job totally not happy with the outcome

@ProvoBeastAudio 3 жыл бұрын

No, aftermarket radios are universal, you will have to purchase the dash kit and wiring harness separately .

@stonerbeatsza9701 3 жыл бұрын

@@ProvoBeastAudio where can I purchase the dash kit and wiring harness😿 please help?

@ProvoBeastAudio 3 жыл бұрын

@@stonerbeatsza9701 Parts listed in description. Just search part number in amazon.

@okCarmy 3 жыл бұрын

Just wondering what dose the 3D gear even do

@ProvoBeastAudio 3 жыл бұрын

Time Travel.

@hcamry 6 жыл бұрын

I finished installation but for some reason my corolla doesnt respond to lock unlock with the remote control, could it be linked to the radio change? thanks

@ProvoBeastAudio 6 жыл бұрын

Generally no, but best way to test is to throw in your factory radio again to see if that functionality comes back. If it doesn't there is another issue with the keyless entry separate from the radio.

@hcamry 6 жыл бұрын

Good, and by the way, does the radio turn on and off by itself when you turn your car on and off, because for me i have to always turn the radio itself on and off regardless if the car is working, which is tough.

@ProvoBeastAudio 6 жыл бұрын

Sounds like you have a major wiring issue.

@hcamry 6 жыл бұрын

it may be, an amateur kid did it for me and was watching this youtube for reference, for me it was the first time to have this done..so ill check in with him. I will have to get a new wiring harness that came with the jvc as well separetely

@MichaelStavropulos 7 жыл бұрын

can the front be removed ? I dont see an eject button

@ProvoBeastAudio 7 жыл бұрын

Yes, it has an removable faceplate

@MichaelStavropulos 7 жыл бұрын

thanks a lot :)

@franciscauriostegui5287 7 жыл бұрын

i have a 2006 and the touch screen doesnt want to come on what can do to reset it

@ProvoBeastAudio 7 жыл бұрын

Factory Touch screen or aftermarket?

@franciscauriostegui5287 7 жыл бұрын

Provo Beast Audio Installation tbh idk

@ProvoBeastAudio 7 жыл бұрын

Well, i won't know how to help you without knowing if it is the factory touch screen or if it has been replaced with an aftermarket one...

@franciscauriostegui5287 7 жыл бұрын

Provo Beast Audio Installation its a AVH-X2700BS PIONEER. MIXTRAX touch screen

@ProvoBeastAudio 7 жыл бұрын

Is just the screen not displaying anything or the entire radio not turning on?

@alanmac8807 4 жыл бұрын

Is it the same setup for an 05 corolla???

@ProvoBeastAudio 4 жыл бұрын

technique will be similar, but the 05 has a different dash design.

@ryanpitout5180 4 жыл бұрын

I have an 06 but the mounting brackets are too narrow and can't fit the unit in!

@asmarifurrahman8853 4 жыл бұрын

Please try to show fully if possible. not to show after editing your video.

@canceraxe1447 5 жыл бұрын

Lost 2 bolt in there!

@FivePandas 7 жыл бұрын

hey, did the factory aux port on the bottom still work with the new radio

@ProvoBeastAudio 7 жыл бұрын

No, the aux port on this radio is located on the front of the new radio. The customer did not want to retain the factory aux.

@harrisonjones801 5 жыл бұрын

Way to let us hear the music lmao

@jr74bronco 4 жыл бұрын

This is not for 2012

@MasterChief-sl9ro 5 жыл бұрын

Them Toyota and Nissan have the cheapest upper dash plastic on the planet. They break if you just sneeze on them the wrong way. Why I hate doing them. You take your time. Only to have it spider crack while putting them back in...

@Leo-ef2tc 4 жыл бұрын

Bruh that mic looks ghetto

@ko8957 Жыл бұрын

I Cringe when I see the "Crimps" were all done by using the Wrong slot on the Tool. Check the Tool for the correct one, it's Marked "Insulated vs Non Insulated."

@ProvoBeastAudio Жыл бұрын

This is OLD content, check out what we do today.