Here are the products featured in this video: Borescope: amzn.to/3ZMguPI Blend Door: amzn.to/45oITgb Blend Door Actuator: amzn.to/3rH8ByA
@teamanomalous603710 ай бұрын
Ironically I just replaced my blend door yesterday, I was dreading it but come to find out someone replaced it before doing the method of cutting into the side so I was able to replace it within 2 hours.
@mikewozawski163410 ай бұрын
Honestly i think it can be intermittent. Mines crapped out but the otherday i got some AC and was so thankful
@737mechanic2 ай бұрын
I noticed instantly that the blend door was broke. It is the typical break. I have done 16 of these camaros now and have heard many symptoms the owners have complained about. Your symptom is one I have heard a couple times.
@gvaspirated2 ай бұрын
The man, the myth and the LEGEND! I've see your videos on the procedure! You are god sent (I mean this in the most respectable way possible). Thank you for commenting and for your videos.
@anthonymurray301610 ай бұрын
This happens by twisting the temp knob too far in one direction so the door breaks off. The faster cheap way is to cut it out from the drivers side and remove it. Mins is currently out but i never use my AC unless i have people in my car and luckily the passenger side blows cold air when needed. Once you fix it try not to turn it all the way to one direction
@trevisboyd32432 ай бұрын
It has nothing to do with the temp knob. It happens over time because the heater core is way too close to the blend door. Over time the heat makes the plastic get brittle and weaken, eventually it breaks. It's a poor design from Chevy.
@anthonymurray30162 ай бұрын
@trevisboyd3243 it does have to do with the knob. It snaps off when the door I'd turning too far one direction. I've seen how it works cause I have the same issue
@trevisboyd32432 ай бұрын
@@anthonymurray3016 But that's caused from the heater core, weakening the plastic. Not the knob. Eventually it snaps when it's turned on yes.
@chovanjamal795710 ай бұрын
I also have this problem on my car I would appreciate it if you do a video on it when you fix it without removing the dashboard ❤
@gvaspirated2 ай бұрын
check out 737 mechanic, he is basically the MAN for this.
@chovanjamal79572 ай бұрын
Thanks man appreciate it
@MarkCantu-jj1yu2 ай бұрын
I got driver side air hot and passanger side cold think its the blend door?
@debo56664 ай бұрын
So I’m getting warm air on driver side and cold air on passenger side. Is there different channels or just one? Not sure what my issue is
@rogeliovenegas51422 ай бұрын
I got this same issue just backwards
@omygunny497810 ай бұрын
When I bought my 5th gen I was told it had a broken blend door. Cold air comes out of the 2 driver side vents but the passenger vents come out hot.
@josedaniel-mu5le6 ай бұрын
Was the blend door?
@Bonnie-on6dp5 ай бұрын
was it the door?
@omygunny49785 ай бұрын
@@josedaniel-mu5le tbh i still haven't checked on it or bothered fixing it lol. I heard in order to fix it you need to remove the entire dash. Or you can cut a piece of the dash where the blender door is located and then just silicone it back. There is a YT tutorial last time I checked but it still hasn't bothered me enough to fix it; I mostly drive myself so.
@omygunny49785 ай бұрын
@@Bonnie-on6dp ^
@debo56664 ай бұрын
@@omygunny4978having the same issue but opposite sides haha
@TheCptnrsk17 күн бұрын
Haci only have a little over 30k on my 2011 ss2 had to replace the resistor for the climate control system but I'm noticing I'm getting air in the cabin somewhere which is causing moisture on the inside of the windows. Any thoughts?
@garrenturk409310 ай бұрын
I always turn my A/c off when im not in the car..... not sure if that helps tho.... ive only had my 15 1ss for like a 1yr and couple months....
@mikewozawski163410 ай бұрын
Haha i knew it was gonna be this. I just live without it. California weather. Im kinda spoiled
@jovannacorrea826213 күн бұрын
I’m dying, in CA 103°-109° like it’s normal 🫠🫠🫠
@CJBuilt10 ай бұрын
That's a big rip... Hope its not too bad!
@gvaspirated10 ай бұрын
Send prayers to my gofundme lol
@TomFed6 ай бұрын
Im up north.. 2015 im at 56k...My blend door went out at 12k and 24k. Both done under warranty at dealer. Just went out for the 3rd time at 55k. I dont use the ac much so its the heat i use mostly. When the blend door goes out, when its cold out, i have no heat. This has happened on too many orher camaros for this not to be a class action lawsuit. I worked my ass off for my 2015, ive never been able to enjoy the heat in 8 years. A basic function of heat or ac i guess we cant have. Im over it, i use toe and hand warmers wear 10 layers. Ive been watching this subject for about 6 years or so, it has happened alot, seems every 5th gen has blend door issues.
@gvaspirated2 ай бұрын
Holy crap man, multiple failures is absurd! I hang out in florida alot, so AC is a must...
@BiBi069610 ай бұрын
Bro this AC thing is getting crazy 😮
@gvaspirated10 ай бұрын
ong... At least winter is coming ;)
@aarongarcia60437 ай бұрын
What size bore scope did I need? I'd hate to buy one that's too big.
@gvaspirated7 ай бұрын
Hi Aaron, the link I put in the description is the one I got and the specific one I used to put in the hole where the sensor goes. I'm not sure of the exact measurements. But it fitted perfectly.