Whoever gave this video a "dislike" obviously doesn't own one of these trucks.... You did a great job.

I really appreciate people like you taking the time to help folks work on their own vehicles. THANKS!

Great job indeed. I was wondering how my truck is ALWAYS dusty inside. Now I know!! I had no idea there was an cabin filter and I looked throughout my user guide several times. I bought a new oil filter and the guy asked in I needed a cabin filter and after a long story...I now know how to do it - and I'm a female! Love my Dodge and my Hemi!!! My cabin filter is cut-out but NO FILTER!!! And the sales guy never told me about this. I know so much more about my truck now and I'm certain I would be a GREAT Dodge sales rep - not that I want to be! Thanks for all you help and I'll be getting that filter in no time!! Keep up the great work!

You do an excellent job of explaining the steps, and not skipping over the mundane stuff that isn't mundane to us laymen. Thanks

Thank you so much for your profressional and very informative videos. Being in Australia it is hard finding qualified RAM mechanics in my area so really appreciate your efforts.

I just installed this on my 2010 3500. To facilitate using the box-cutter, I first drilled about eight small holes where I needed to go, then just connected up the holes with the cutter. A 15-min job. Thanks for all the tips. (PS: My evaporator, replaced yesterday by a shop after 94k miles, didn't have any mud on the backside like you've shown, but boy was it ever riddled with refrigerant leaks!)

I'm five years late but great video! Been thinking about doing this to my 14 Ram Laramie, thanks!

One of the easiest mods ever! Chrysler uses the same cabin filter door across a ton of vehicle platforms! Once I got the filter in there the clips were nice and tight! Absolutely awesome!

Congratulations David. Your info is great. I have a 2013 and was disappointed that it didn't have a cabin filter , now it's going to get one.

Very well made and useful video. Thanks for taking the time to do this. I've got a 2010 Ram and I plan on doing this upgrade this weekend. God bless!

Thank you, Thank you! I had checked a couple of other sites and of course no help! You informed me that I indeed did not have a door to install the filter I wanted to change! Great job, and thank you again!

I did this mod on my 2009 Ram, bought the kit from Genos. They included a catalog and a couple freebies in the box(nice touch) You will definitely notice less dust in the vehicle. Be careful not to drop cut pieces inside. It's a tight fit, you might have to bent it and wiggle it in. I would recommend k&n filter or any reusable filter as they are expensive. Very good video instructions

David another great Video I've got a 2014 with 319,650 on it and you've helped me keep her going strong

Yeah, I've been so busy lately that I forgot that this is something I wanted to do... So, since I have a 2010 3500, and you are "The Man", well, not "THEE" Man, but, definitely one of them, here I go... Thanks for the How to Videos, Hope the Family is doing well !!!!!

Worked for my 2016 RAM 1500 as well. Thanks for the great video! Only a 15 minute job for me.

Nobody does it better on utube, very informative an to the point👍

thanks for the video,I just bought a 16 Laramie ,would have never guessed it didnt have an in cabin air filter,will be doing this very soon.

Getting my ac evap core replaced today and will definitely be getting the cabin filter. Tks for the great how to video!!

Thank God for your videos. You saved me a ton of time and money! Thank you from the Jersey Shore!

Awesome vid. I couldn't wait to order a kit via the mail so I cut out a piece of filter (8"X8") from a large home HVAC filter that I purchased at HomeDepot. Installed it and put two strips of Duct tape across the door opening making sure to seal it around the edges well. Works just fine.

Great video, installed mines today. Be patient and cut, cut, cut. It works great.

My cousin, a friend and I done this back in 2012 to a '10 1500, '11 3500 and a '12 2500. The friend got the doors from the dealer and the filters came from one of the chain auto parts stores. If I remember correctly it was the filter for a 2010 dodge caliber that we used. everything fit perfect but my only complaint was the reduced airflow from the vents even with the filter in the correct flow direction. I wasn't that much of a drop but it was noticeable compared to no filter.

Thank you, Great Vid. Helped a lot. I thought I was losing my mind trying to get the non-existent filter out. What was dodge thinking. Saved them how much a truck and upset a lot of customers.

My 2012 3500 started leaking freon in 2021 at about 60,000 miles. It was 1200 bucks to fix. Now sometimes, it smells like freon just when you turn the AC on.. Sometimes not. But after spending 1200 bucks, I'm not real happy. Thanks for this video showing how to put in the filter. I wonder why Dodge built the opening but decided to not install a cheap filter. At least we have videos like this!!!

Thanks --- used a box cutter but had some small pieces fall in, had to remove blower motor to make sure all pieces were out. So be careful. Heating up the box cutter sounds like a great idea. It was very easy to remove the blower motor -remove 1 panel and 3screws and it comes right out. Thanks for the video.

Just bought this kit and like so many times before, once again your video is the “go to” for me. Thanks for this. 👍🏼👍🏼🇨🇦

Just wanted to say that I have watched several of your video's and I want to say thanks for your time and effort. I have a 2015 ram 1500 and you do an excellent job explaining you video's very easy to follow and to the point. Thanks again.

I'm gonna start off with a NEW blade and see how it goes. Good video. Thanks. I really thought a 2014 Ram 1500 Laramie would have had a cabin filter. SMH.

This was an Outstanding Video on how to do this. I will certainly be doing it myself. Thanks!

This is one of the Best Tech I ve seen

Still boggles me that dodge did not take the 10 minutes like the awesome mechanic did to install the filter from factory. Thanks again on this video.

Fyi, the mopar filter kit comes with a crappie filter. I ordered a much better filter (Purolator Boss) at the same time I ordered the kit. Was happy I did.

I have followed your instruction and I did a successful installation, thank you

Thank you for sharing, The soldering gun looks to big to get in to do the job and way to hot. I modified a Weller (pencil type) soldering iron tip to except a modified #11 Ex-ado blade and made a easy perfect cutout without any loose derby getting down into the fan. I cut down a new larger cabin filter I had left over from a car I sold on my band saw. Size 7.25" X 8" and about .75" thick. I used duct tape instead of the $18 leaky front plate with the easy to brake off plastic latches. Duck tape was designed for air ducks and a 9" strip seals tightly.

Great video. Will add the filter to my 2014 Cab and Chassis

thank you ! I have learned and accomplished so much from your dedication and knowledge.

Appreciate ya keeping this video up. 👍 Quick question - how to determine correct install if filter lacks an arrow? Most filters on Amazon no longer have an arrow (in 2023). My used 2011 RAM 2500 didn’t have a cabin filter installed so followed your instructions and saved $70 labor at Dealership. 🥳🎉💰

great video and explanation on what causes the air flow to reduce and hinder the cooling man!

Just checked my 2016 3500. No Door or Filter. Will be putting in one ASAP. Thank You.

Thank you I will be fixing my AC. FILTER...💯

Great video. Thanks very much for keeping it clean. GOD BLESS.

*eye brows rise* Ran out to my 2014 RAM (bought used) on lunch hour. No air filter. Thanks MotorCity Mechanic. I'm going to do this up soon. In the mean time, I'm going to shake my fist at FCA.

Great video, with easy instructions on how to install it 👍👍

Much needed upgrade 👍👍

This is fantastic information and a wonderful video! Thank you!

Great job....thanks...2011 Ram

Excellent ,Just installed in my 2009 Ram 1500 ,Great How To !

Yes, Thank you. I found out at 70K miles my wifes truck needs this modification. 2015 Ram didn't come with the door.

Your videos are awesome

Awesome …thanks for this 🙌🏻🙌🏻🙌🏻🙌🏻

Another great video young man thank you

cool not to far out .... I find that the right top corner is a bit of a pain to cut out as you don't have much room after I done the cut out I found out that there was no filter in the box i'm guessing either Chrysler didn't put one in or the previous owner had it removed by dropping the dash by a mechanic either way I now have a filter in and my air flow is much cleaner thank you so much for your help & videos they are very helpful

Dude your amazing!!!! Thank you!!!!!

Thank you. God bless you

I was going to get this kit for my 2017 and low and behold it has the door and filter already installed.... for once Dodge Engineers did something right my last one had nothing and dust was a nightmare

Thank You So Much for Posting . Very clear and informative.

Great video

Good info David .

Very cool

Great video for new owners dodge thanks

great video sir.

I was supprized at how easily it was cut out. The hard part was realizing I had to come in from the drivers door or I was at a bad angle to get my hands in the space

Nice install brother just order mine i have a 15 sport and it has the same set up to install cabin air filter

Thank you.

Thank you so much amazing video great help

Thank you good sir!!

Great video thanks. I'll be checking out Geno's.

Thank you for the video, very helpful!

Great job 👍

Awesome video

Excellent!

thank you

Great video, thanks for the info. I'm definitely going to order one.

Thanks,excelent, good explanación,clear,and undertable,thanks,fron,san benito tx.

Man thats absolulty the best video ive found for dash removal. Clogged Evaporator i never thought of wow what a mess that thing was. Im having heat issues in mu 2010 w/ 6.7 getting ready to pull it apart. This just made me more comfortable attempting it. Question if the evap coil was that bad what did the heater core look like ?

Great vid very thorough

I disliked so i could like it, then like it again so i could like it twice.

very good very good

Great video like always👍

I traded my 2010 Avenger in for a 2014 ram 1500 quad cab after watching this video I did check to see if my truck a/c filter has or has not been changed found out just looking where it's located at it has not been changed before I ordered the kit from Geno's I should be getting it within a week

Buen video GRACIAS ... good job.. thanks

A multi tool will work as well to cut Plastic !

Okay everyone. I did this thing with new razors and such. It is not as easy as this video suggests. 1: Wear gloves, I couldn’t tell where I was so I had to take mine off. Got a few cuts from banging around while trying to make the cuts. 2: get a light in there to help you see what you’re doing. My hands and equipment made so many blind spots. 3: it’s not easy to cut through that plastic. The two top corners are reinforced. You’ll want to try to cut perpendicular. The top corners are going to give you some trouble. 4: the filter that comes with the kit is crap. Search and order a good filter before you do this. 5: the cover door does not want to go on easily. Hook the left side then use a tool to push the right side (very important) CLIP in. It is very hard but push on the clip release to get it to latch. 6: you will have to wrestle the filter in if you purchase a good one. 7: okay good luck and once you start you’ll have to finish. 😀. Oh and it took me about an hour and I had to do a lot of contorting. Hope this info helps someone. Please share this because there are a lot of videos on how to do this and I cannot post on all. 😀

AWESOME!!! THANK YOU!!! excellent video!!

Thanks doing mine today

GREAT !!! THANK YOU SO MATCH!!!!!!!!!!!!!!!!!!!!

I see he the broken tab from trying to mess with it before it got taken in to the shop, too. Now I don’t feel like a jerk.

Was told by dodge if my 2016 had no cabin filter and I try to add one the filter will just fall against blower motor because there is nothing under it to stop the filter to hit blower Motor. Please let me know. Dodge wouldn’t do it for me said it would be putting something there that is not set up for it by dodge. Please reply. GreaT video

Great video and very well detailed as always. My only question is why would they make a compartment where one would have to literally cut it and replace it with a plate? Seems backwards to a prestigious truck not so?

I purchased this kit a few months ago. It cut pretty easy, but upon turning on the AC today I heard a whistling sound coming from the glove box. When I arrived home the door is not staying attached to the box. The clips are not broken but it doesn't stay clipped.

I've seen a few of these videos and I assume it's not easy or not worth it to remove the plastic housing that gets cut. Can someone explain why no one takes the plastic housing out so that it is easier to cut the rectangle?

Why did I put 300,000 miles on a 1977 Chevy half-ton pickup and never once have this problem or need a cabin filter? What is so different about a Dodge Ram’s HVAC design that causes the evaporator to clog up and my Chevy never did? Just curious.

Great video! I have an '06 Ram 2500 MegaCab (diesel) with terrible A/C performance. Even with the fan on high, all it does is make more noise with very little increase in actual air flow! Wondering if the condenser is clogged like you showed or if there is another fix? I don't want to drop my dash, but I also don't want to take it to a dealer to fix it $$$. Any shops you recommend in So. Cal. to do something like this? Thanks!

Great video. Kinda sucks that RAM did not take this small step to help preserve the life of the AC system. Seems like one way to get repair business for their dealerships.

Great video. My only question is, I got the kit form geno's garage and did the things according to your instructions. All seems ok except that the cover does not snap in place, is it suppose to? Thanks for your help.

So I bought a 2014 ram 2500. Why the heck would the dealer not put a cabin air filter in this truck

Hey bud I have a question my 2016 ram 3500 6.7 is making a high squeal when in the throttle and when using exaust brake. Which I use a lot as I tow about 18k lbs all The time please let me know your thoughts thank you 🙏🏻

Thanks you super video!

Does NOT fit in my early 2014 Ram sport. Only half the cutout lines up with the glovebox. Now I have a spare filter and door. What’s the fix here?

So there's no need to cut out that step down below the large rectangle?