2010 GMC Acadia timing chain replacement

No video

2010 GMC Acadia timing chain replacement

Рет қаралды 10,561

Antonio Aguirre

Жыл бұрын

This engine is the same as the traverse, Enclave, Acadia, and Camaro

Пікірлер: 55

@curtisgore1611 7 ай бұрын

Thank you for making videos on this engine. I haven't found much online with this engine.

@antonioaguirre6166 7 ай бұрын

You are very welcome. I’m glad you like it. 😁 check out my channel I am all about 3.6L. I’ll eat them for breakfast 🤣🤣

@antonioaguirre6166 7 ай бұрын

Thank you for watching, like share and subscribe it helps the channel

@Justjoe_804 10 ай бұрын

Master tech at work

@antonioaguirre6166 10 ай бұрын

thank you for watching, like and subscribe, it helps the channel.

@DrFiero 8 ай бұрын

For anyone else... Check your oil pressure!! With low pressure (under 30psi), you won't get enough spray off the jet in the tensioners to lube the chains and they'll wear the rollers/pins - then the dreaded chain snap. I've added an actual mechanical gauge going into the interior so this never happens again. Got about 15K km's on a brand new chain/tensioner/gear/pads setup - but I failed to put in a new pump (which is NOW new!).

@antonioaguirre6166 8 ай бұрын

Good information. Thank you for watching like and subscribe

@johnny4713ify Жыл бұрын

Bro your the Acadia whisperer 😂 the way you didn't give two 💩's about the oil timing guide had me rolling plus the fact you man handled the camshafts was next level. Most if not all the vids I've seen on doing this job have people using a camshaft holder to minimize jumping a tooth during the install especially the right bank and just replacing the plastic guide on the oil pump. Apparently according to GMC techs on forums including Cloyes reps that part is super critical and torqued in a certain sequence during the oil pump manufacturing process so they only chage out the plastic part or replace the entire pump when doing the timing chains to avoid issues. I know I'm going to need to change out the chains on my 2008 soon so watching every video on the subject. BTW I'm thinking of just going with OEM timing chains since I've heard that Cloyes kits have been having issues. Do you have a timing chain kit you recommend? Thanks

@antonioaguirre6166 Жыл бұрын

I love working on this engines. I do it everyday. I think I have done at least 100 of them this year. If you follow my steps you should be fine. I driving the Acadia right now and don’t see any issues. No engine codes either.

@antonioaguirre6166 Жыл бұрын

Oem parts are good. I’ve been using the cloy

@antonioaguirre6166 Жыл бұрын

I’ve been using cloyes for the last 4 years and I haven’t have any problems so far

@antonioaguirre6166 Жыл бұрын

Thank you for watching, like and subscribe it helps

@johnny4713ify Жыл бұрын

@@antonioaguirre6166 Yah I was thinking of going with them too since they were one of the first after market timing chain kits, but what I've seen and read online they must have switched manufacturers because the quality of the tensioners have gone down and I've seen alot of failures lately. I have 140K on the engine and it's been good, but I've had the timing cover oil leak problem right after my warranty expired. So I've been pretty much changing oil on it every 3000 or sooner just to be safe so far 40K miles later no issues. I don't have a lift so planning on doing it in the vehicle since it is possible, but a pain in the butt. I believe the recommended timing chain is at 120K or so, but it's just a weekend car so not driven too often. I was just planning on just doing the timing cover reseal, but figured I might aswell wait until I really need to dig into the engine. I'm sure you can have those engines out in less than an hour by now with a lift 👍🏻

@GiveMeFaceCo 7 ай бұрын

Soooo what happens if you spin the engine backwards?😬😬😬 cause I’ve just been spinning mine both ways. And now it only turns so much before it stops and won’t turn any more, then I go backwards and it only goes so far before it stops.. I hope I didn’t damage anything 🙄🤦🏽‍♂️

@antonioaguirre6166 7 ай бұрын

It’s not a good idea to turn these engines counterclockwise. These engines work with hydraulic tensioners when no oil pressure is present and you turn it counterclockwise it could possibly jump time. It sounds like some of the valves are opening before time that’s why it won’t let you turn it 360

@GenuineAutoParts 9 ай бұрын

So i opened the engine to replace the timing chain and i found the main oil pump chain snapped. No how do it install the chain and how do i know if the cams are in time with the crankshaft?

@antonioaguirre6166 9 ай бұрын

They are not in time anymore. Just make sure your cams marks are facing the direction I showed you and the crankshaft lines up with the mark on the pump

@antonioaguirre6166 9 ай бұрын

Loosen up the camshaft bearings to help you turn the crankshaft

@antonioaguirre6166 9 ай бұрын

I’m about to upload a video showing how to loosen up the camshaft bearings and re-torque them

@GenuineAutoParts 9 ай бұрын

Man you are awesome I really appreciate you!

@GenuineAutoParts 9 ай бұрын

Can you please show the marks on the camshafts and the matching mark on the crankshaft

@user-qs6ly6mu5f 7 ай бұрын

Hi Antonio. Just had my timing chain replaced at the dealership. I'm now getting codes P000A, P0008, P0016, P0301, P0303 and P0305. Any thoughts on what I should do next?

@antonioaguirre6166 7 ай бұрын

can you give me a little bit more info on this? year make and model, where the camshaft phaser replaced too? how long did you drive the truck till these codes pop up? there is a service bulleting about these codes p0008 and p0016. I have never experience it but someone else had this problem. the p0301, p0303 and p0305 is related to bank one. I am surprised you not getting codes for bank two as well.

@user-qs6ly6mu5f 7 ай бұрын

@@antonioaguirre6166 It's a 2010 GMC Acadia. 230000 miles. No, the phaser was not replaced. The codes came up after leaving the mechanic, maybe 5 miles down the road. The mechanic couldn't start the vehicle after replacing the timing chain, so they replaced spark plugs as well but I did drive it there to begin with. I hope to take it back to the mechanic after the weekend but was hoping for a second opinion.

@antonioaguirre6166 7 ай бұрын

so, before you took your car to the dealership what was the car doing? The way you are explaining this it sounds like they left something wrong with the timing on bank one. did they give you some kind of warranty? I always offer my costumers warranty and if I did something wrong, I would do the job over again till is right, so if they offer you warranty, they need to take it back and redo the job. especially if it happens five miles after the job was done. it sounds like they did not remove the engine off the vehicle, it is faster, and it cuts labor time but bank one it's kind of hard to do specially if the engine is not out the vehicle.

@antonioaguirre6166 7 ай бұрын

thank you for watching like share and subscribe it helps the channel.

@user-qs6ly6mu5f 7 ай бұрын

@@antonioaguirre6166 Before taking it in, I would lose power while driving - pressing on the gas caused the vehicle to slow down. Received "Engive Power is Reduced" and "Service Stabilitrak" messages on interior display. I had to pull over, turn off ignition and restart and would be able to drive for a few more miles. Dealership used GDS2 to verify cam position correlation failure, timing chains worn, and recommeded replacement to correct. I hope they have some type of warranty but not holding my breath. Would have loved to take it to you after watching the care and attention you put into your work on your video. Unfortunately, I'm 1500 miles away from Texas.