Found out my car won't start at midnight. Your first video saved me an hour, this one saved me a week.

Thank you, I followed these steps to repair a 2006 Kia Rio.

Thanks for this video. I was successfully able to get my friends car started again and fix the lock

Dude - if it weren't for your video I would not have even attempted to fix or replace my ignition, for this exact make and model. I pulled out all my wafers, still nothing. My ignition was completely jacked up, I don't even know how to explain it. I tested a second key I had and it still didn't work. But because of you, I had the knowledge and confidence to replace the ignition with a new one I got at a parts store. You saved me hundreds! I didn't have to tow it or leave my car with the mechanic for who knows how long. Can't thank you enough sir. This little video saved me major headache 👍🏼😎

Thanks dude. I followed your tutorial and I did the cheap fix. Remove the pins that wasn't flush. Thank you some much! I'm a cheap guy and people like you help me be cheap

You are a life saver, this process worked on my 2012 Kia Optima - i just followed the exact directions on your video. Wow saved me a lot of money for parts and labor on a new ignition cylinder. Again thanks a million!

Thanks for making the best video on KZfaq on the Kia ignition switch. I followed your steps on a 2009 Kia Rio and it was the same for the most part except that little indent button that holds the ignition switch in the housing is on the opposite side of the housing.

Excellent video thank you I only wish I had seen it before I went and bought a second hand one , that’s a spare now 😊😊😊😊

Thank you very much. Todau my ignition did the same time at Walmart. I was literally stuck. After 25 minutes i was able to grt it started. Whrn i got home i watched your video and followed you exactly step by step. It worked! Thanks a alot.

Thank you so much for posting this. Got me out of a tough spot with my car

Thank you mate, got me out a probably expensive situation. Was just about to run down to the wreckers but I figured I'd check you tube first, cheers mate.

Thank you!! I was stupid enough to not remove gasket and trying disassembling kia ceed jd lock cylinder. You video give important clue to how to solve this puzzle.

Have the same issue with my 2009 Kia ..Thanks for sharing !

I've got Kia Ceed MK1 with sticky ignition. I sometimes have to back the ignition barrel after taking out my key to make the clicking noise, otherwise my car thinks key is in ignition and car won't lock with fob. I've followed the instructions online of taking out the barrel and greasing, twice, once with Lithium grease and second time with graphite powder. But after a day or so it starts sticking again. What's your suggestion to fix this annoying problem?

Thank you man you help me save money.

Thanks I did it it works good save some money $300 bucks thanks you 💯👍🏻

Thanks brother

Where does that white piece plugs into on a Kia forte 2010

I have a 2007 kia rio 5 , and I took my switch apart, but it doesn't have the wafers. I hope I can just start it with a screwdriver

I couldn’t find the button to save my life sadly

This is merely a temporary solution to get the car running but the problem will arise sooner rather than later. I understand some customers want the cheapest option and you have given them exactly that.

My key is stuck. U keep pulling urs out. How!!!

hello i have a kia ceed 2010 in which the mechanism for the steering lock doesnt engage when i pull out the key from the ignition. Giving a little tap at the bottom of the steering wheel makes the poping sound with which the steering lock engages. The disadvamtage of this is that the car thinks that the keynis still in the ignition so my remote control of the car wont work. I tried lubricating the cylinder with liquid grease sprey and wd40 but it didnt work. Does somebody have any suggestions? Thanks im advance.

I have a 2007 Kia rio 5. And my ignition is wore out. I can turn the key and start the car, but I have to turn the key back once it starts. It wants to stay engaged. Is this video the same as my 2007

Hi there, is it the same locker with 2014 ¿?

Hola nesesito ayuda para una inicio kia 2013

Throwing out bent wafers is just cheap. It will eventually cause the key, which us the real cause of the problem, to enter the keyway out alignment and bend the few remaining wafers left. to Get a Hyundai pinning kit and replace all the wafers. Since your seeing it quite a bit more. Just creating a job that a locksmith will have to fix properly later. The key being worn and probably bent was the cause of the problem. The key needs to be recut FROM CODE, NOT DUPLICATED. And the cylinder properly pinned with wafers to the correct depth if the keys depths. The wafers near the fron that you hyst pukk out and throw away cause they look kinda rough. That's being caused by the worn key. Switch will eventually nsm again . You ain't fixed nothing. You have created additional work for future college fund.

Same with 2017 Kia Rio???🤔

I think I'm having a seizure