The replacement of the Clock Spring in the Steering Wheel of a 2010 Toyota Highlander Limited solves the issue with the Horn not working. Vehicle without Multi-Information Display. Toyota P/N: 84306-0E010.
Пікірлер: 35
@rogerhuff45883 жыл бұрын
Thank you so much. Would be really expensive if I had to pay for labor cost. The clock spring is very pricey. The time and effort to record and share this with all the people that without this video would not know how to correctly do this is greatly appreciated.
@lciummo12 жыл бұрын
DEaler would charge 1hr of labor for this plus retail on the part.
@lanenygren905511 ай бұрын
Thanks for an excellent tutorial. Bought my part on eBay for 16 bucks and installed it in 20 minutes thanks to your detailed and crystal clear instructions. Saved me almost 400 dollars! Greatly appreciate the excellent quality of instruction and filming.
@franklodolce87636 ай бұрын
Thank you for the effort !!!!! Made fixing it effortless.
@peterzanella4332 Жыл бұрын
This is the absolute best video! I followed it step by step and replaced the clock spring without issue. Thank you so much. Great job explaining every step along the way.
@Sturmcrow13 жыл бұрын
Thank you for this great video. I have to admit that I did not watch it all the way through at first and I was also thrown by the extra connector for the steering sensor.
@frankbiz3 жыл бұрын
Great video on how to replace the clock spring, 👍🏻 I pray I never need to do this.
@silberfarb3 жыл бұрын
Hey super video. Worked great for my 2012 highlander. Thanks.
@borderline6663 жыл бұрын
This a great video straightforward without annoying music ;-) Thanks a lot for posting this, this helped me doing a steering wheel replacement!
@elmoci3277 Жыл бұрын
Hi thanks so much my cruise control wasn't working and I follow your tutorial video and I replaced the clock spring and my cruise control now works thanks so much for your help.
@fernandowong2007 Жыл бұрын
My sister-in-law thinks the horn is a necessity. I don't think so. But regardless, it is now fixed thanks to your video!
@donleamon86534 жыл бұрын
Going to do this on my wife's '12 here in about an hour.
@schaubk123454 жыл бұрын
How did it go? I have a '11 that seems to have this problem.
@benfoulger750 Жыл бұрын
Thank you man. Fixed this issue!!!! You rock!!!
@dmitryzaitsev54223 жыл бұрын
good video with full describe
@JoseSandoval-zw2ms6 ай бұрын
Very helpful thank you sir !!!
@msmith3116 Жыл бұрын
Awesome! Thanks a ton.
@jonathanlugo013 жыл бұрын
Great video👏👏👍👍
@raymond82807 Жыл бұрын
Very useful video, Thanks!
@JaguarMikey9 ай бұрын
Thank you very much!
@samfisher38152 жыл бұрын
Very useful. Thanks
@felixa8607 Жыл бұрын
Thank you for such an excellent video. We are super impressed with the care and clarity that went into making this. My horn is doing the same thing as yours. I am ready to order the clocks spring and follow your lead. But wanted to get your opinion. Is there any way that the following cancels out the clock spring as the issue: If we turn the steering wheel to 10 or 2 o'clock, the horn WILL sound - not consistently necessarily. But for all practical purposes - we have no horn. The panic button on the FOB on the other hand does sound the horn.
@lciummo12 жыл бұрын
Wear a wrist strap around your wrist and connected to a bare spot on the door frame. A stray static charge can set off the airbag - you want to be grounded. And DISCONNECT the negative on the battery.
@Coacheslick2 жыл бұрын
Fantastic video! Saved me $450!!! Thank you!
@salahbanalwi85913 жыл бұрын
Great 👍👍
@abo3mmar2922 жыл бұрын
Thank you so much
@Ilovecomedy79 ай бұрын
I started hearing a rattling noise from the clock spring area even if I am driving straight. I am going to take each part off from the steering as you showed and figure out the cause.
@mikebroderick17088 ай бұрын
Thanks for the great video! Did the replacement ...but it did not fix the horn :-(. I have a 2012 Highlander Limited. Bought the cheaper aftermarket clock spring. My horn only was the only thing not working. Everything else on the steering wheel worked fine before and after the clock spring replacement . The horn did and still does work from the key fob alarm button. (So not fuse/relay.) Not sure what else to check? I agree it would unlikely be the airbag/horn front cover unit (as rarely used). But not sure what else to check? Any ideas?
@chahwahl.sakambwa66733 жыл бұрын
Need time and patience to do this replacement as there is a lot to disconnect
@intertonyblue9 ай бұрын
My 08 Highlander limited hybrid, my cruise control doesn't work anymore. Fuses and fine, no error codes. Someone told me he had the same issue and replacing this fixed the issue. Beside the horn, do you think this clockspring replacement will fix my cruise?
@mikebroderick17088 ай бұрын
I would say yes, the clockspring ribbon cable (that breaks) connects everything on the steering wheel. So a broken cable would likely break multiple controls on the steering wheel.
@BenWilliams72 жыл бұрын
Thank you for posting this. I was able to finally get me wife's 2008 Highlander horn fixed. It would've come in handy recently on the highway when another vehicle wasn't paying attention and cut us off when merging swiftly into our lane! My instant reaction was to lay into the horn but it didn't work and the other driver I don't think ever knew what he/she did. This vid also came in handy where the guy shows the part dissected. kzfaq.info/get/bejne/bpxinN2am76nmH0.html God Bless.