50+ year old female here getting ready to do this job on a 2012. I planned it for a 4-day weekend because I KNOW I'm gonna screw something up. This video will help - great vid compared to some others.

The best video on this subject, no complaints, no wining.

Appreciate the video! Hardest part is definitely taking that intake manifold off. There's an aluminum line bracketed to the rear manifold bracket bolt with a retaining clip. I had to break the clip to get to the nut. I did all 6 spark plugs with new coils in about 3 hours and I HATE working on cars. Props to all the professional mechanics out there, I'll stick with HVAC lol.

Wish this creator would have added sizes of all bolts and sockets in their tutorial as that is always extremely helpful.

Thanks man this is going to help me replace some rocker arms that are making some ticking noise already. I had a hard time trying to figure out how to take out that air intake top manifold. Thanks and keep up the good work.

Thanks for the video! I'll be doing my plugs soon.

Always do the hard side first! Makes complete sense!

Great video angles and clear directions, thanks!

Thank you for making this video. I couldn't of done it without your guidance. Girl Power 💪

Wow brother thanks you so much this is going to help out a lot !!!!!!!!!

So glad I found this video! I have to replace my ignition coils and spark plugs and this is great instruction for getting to those parts.

Thanks alot bro! Great video! 😁👍

Great job and explanation! Thanks!!!

great job and i appreciate the work its motivation

Great video man thanks

Wow you make it look easy 😎

@mechdjango what size of socket did you use to remove the torx studs at the manifold support bracket on the drivers side

Perfect video. Get to the point no bs stuff.

Thanks for the help 🤙

Thanks for the video

Do you have to take the manifold off to do just the plugs seemed like enough space to get to them

Great video! What are the tools needed to do the job? (specs, sizes)

How long will replacing the spark plugs take

Great video thank you

Jeez! Can't believe it's this complicated compared to other cars

What size socket did u use to remove the spark plug?

Thank you so much for this. Saved me a few hundred dollars. Plus you guys made me laugh.

How tf did u get the driver side rear bracket out by removing only the top nuts?

No torque wrench or gap spacing measurements on the plugs?

Much appreciated

@4:14 what did you use to take out that screw?

Can I know where is number 2 coil??

I got code P0301 misfire in #1 cylinder is this a coils and spark plugs fix I’ve 60,000 miles on my 2020 Dodge Durango Gt is this common?

Would it make it easier to remove the wiper cowl?

Where did you source the gaskets at?

Would the gaskets that should be replace be considered upper or lower intake manifold gaskets? And which one is the 2nd cylinder?

Torque specs are 89in lbs or 7.4 foot lbs for the intake manifold bolts.

So did you just repalce a few coil packs or do them all? I have a #2 misfire and so i just got all new plugs but i dont know if i need to replace all the coil packs or just the one that is misfiring, same year and make as the one in the video

I agree with doing the hardest part first.

What tools are needed?

How many hours does this take To complete?

Do this cars have a serviceable transmission? My 14 Durango dont have a dipstick. Also how tight you put those spark-plugs? Thanks!

How many kms or miles before I need to change? Great video. I watch it a few times every few months cause I know this is coming before fall. Thank you sir.

I had a coil go bad. The mechanic said it was failing when it go to a certain speed it would sputter and I have to come off the gas. They changed the coil it worked ok but now it just sputters all the time. Why wouldn't they change all the coils at once?

Does anyone know where cylinder 2 is? Cant find a firing order online

I just had the oil cooler replaced, would have been the time to change the spark plugs, but of course the mechanic didn't tell me that, so now I get to pay for all of that labor again. He broke the end of the fuel rail disconnecting the fuel line last time, which caused it to be in the shop for a week, waiting on parts, he didn't charge me for any of that, and accidents happen, but dang, I wish that I had known, I just started noticing that it was running a little rough at stop lights.

I’ve already fixed the track light which was a PITA but dear god this job looks just as big. Wtf dodge, why is it so complicated lol. Do you know which ignition coil #5 is? Durango GT has slight rough idle which threw P0305 code and it’s saying it coil 5.

Question! Have you ever encountered a ignition coil with a stripped bolt particularly on that 6th cylinder and if so what on earth would you do?

Do you have to replace the coils with new spark plugs?

Do you know where is the fuel injector number 3 located?

Hey bro did you edited the video in the restroom lol😂

Here's what's strange at beginning of video you said 2015 Durango. Looking at the oil cap it says 5w 30. Mine is a 2015 it says 5w 20. But I put 5w 30 in it anyway. .. Strange

The intake is different on a 2017 Durango.

My buddy has 2016 looks backwards to this manifold cover on passenger side here looks like driver side…, where is cylinder 3?, driver side middle? That’s coil and spark I need to replace

What brand gasket are those

Link to gaskets

How many hours of labor is this job?

He sounds like Micheal jackson lol

At how many miles do you replace the spark plugs?

Those 2 bolts on back of throttle body are the worst

It takes about 5 hours 4 on a good day lol

Damn dodge, you have to do all that just for a spark plug.

What type of spark plugs are recommended?

My mechanic says it’s a three hour job to change six spark plugs.

😂😂😂😂😂😂

Jobs like this is why I'd never buy a dodge. I don't mind getting paid to work on them tho lol

Definitely is not as easy as it looks in the video to pull the manifold out.

Low T garage.

What a shitty car. Basic maintenance required intake manifold removal. This is indicative of a company that hates it's clients

You Don't say WHAT SIZE TOOLS that are Needed for job!

F Dodge engineering for allowing such crap to be put into production. What a mess to change a set of plugs.

Your audio is horrible. I can barely hear 1/2 of what your saying!

This guy doesn't know what he's doing

Didn't show how to remove the actual spark plug in a spark plug video. Hmmmm

Got A quote of around 600 to replace the plugs😢