Trying educate myself i know very little about fords . And this I'll need to watch while I'm doing the brakes and rotors.

just did an alternator replacement on a 2005 and it is now in limp mode, any ideas?

Great video, thanks

Thank you this helped a lot now to find some tools lol 😂

how long does it usually take to do this job? and how long did it take you? im about to perform this job on a customers 2.0t just want to get an estimate of how long it usually takes

Pregunta ya le cambie todo bomba de agua el fanclush y se limpio radiador y se sigue calentando

Just did mine and went from 12.2 at idle and dropping down to 11.9 with acc/headlights, up to 13.7 solid no matter what I throw at it. God bless

Hey...great video. I know this was i while ago, but i was wondering if there was a way to just change to top part of the pump (the electrical connector)? I saw a diagram of it just screwing in ?? It is all that is broken on it. Broke it trying to change a coolant line behind engine.

would be helpful if u canned the stupid music and explained everything. maybe u do but i stopped watching after a minute because of the music and no talking.

@1:00 mark, behind the EGR valve what is that part called that is attached to the frame and has 2 electrical connectors and 2 maybe vac hoses? My brother was working on his Mazda and one of the hoses came off but it broke off the main piece that is attached to the car and now we have a leak. I have no idea what it is called to even try and order a new one. Any ideas?

Thankyou. I think I'm going to have to replace my alternator. Pictures and manuals are helpful, but sometimes it's just easier seeing someone else do the repair that you are planning on doing.

I just had the oil cooler replaced, would have been the time to change the spark plugs, but of course the mechanic didn't tell me that, so now I get to pay for all of that labor again. He broke the end of the fuel rail disconnecting the fuel line last time, which caused it to be in the shop for a week, waiting on parts, he didn't charge me for any of that, and accidents happen, but dang, I wish that I had known, I just started noticing that it was running a little rough at stop lights.

no way this car was being driven on the road like this .

Past me: "I'll change my cabin air filter - it's *never a complete pain the balls." Day 73: "Today, with enough reverse engineering, I've come to the logical conclusion that Mazda started the design of this car model with the cabin air filter as the keystone and built the rest of the car around this beautifully, logically, and most especially - deepest - engineering component." 😐 Well done, Mazda. Masterful engineering for a commonly replaced part.

dancing queen

Decent video music very annoying

Nice on the visual and audio, great on the explanation!

Whats the socket size for ac compressor belt?

Low T garage.

Can you get to this from the bottom of you take the front pass wheel and wheel liner out? Or absolutely have to jack the engine up?

Have to change mine on my 08.Thanks so much. Mine seized after sitting in garage this past winter.

It's 2024, and I've got a 97 grand cherokee 5.2 that i use if i have to do any heavy lifting, the serpentine belt ripped today, took me 15 min to replace thanks to your video. Saved me a trip to the mechanic, and a few bucks im sure. Great Video!

thank u for posting and i love the jazz accompaniment

What coil do you replace for number 2 cylinder?

I like to provide my own parts cus I can't get them cheap that what you guys charge for a part

Big help! Thanks for the video!

4inch ext with a deep well socket 13 mm

Those screws are a modified version which the Japanese made called JIS Vessel make a great impact screwdriver. Look up Vessel Megadora 980 Impacta P2x100 P3x150 JIS

50+ year old female here getting ready to do this job on a 2012. I planned it for a 4-day weekend because I KNOW I'm gonna screw something up. This video will help - great vid compared to some others.

Good quick video, no BS. Always appreciate that! But you left out a HUGE step for some of us. After a couple hours of wrestling with mine, I found this video... kzfaq.info/get/bejne/obGCedyknJjTgI0.html

Great video if you have to work in the dark or if you're blind but still need to change out a Hyundai alternator

He's working on 2.3 l. The 3.0l will this be the same to change thermostat?

have you ever had the plugs stuck in the 3.7 engine? I've heard some people had to have the spark plug hole heli coiled due to thread damage on removal

So did you just repalce a few coil packs or do them all? I have a #2 misfire and so i just got all new plugs but i dont know if i need to replace all the coil packs or just the one that is misfiring, same year and make as the one in the video

Thanks for the video, about to take mine apart to see what's going on with it. I can heard the motor running but nothing is moving. Fun fact there is a Recall on the 2014-2015 models for the the windshield wiper motor. A dealership with replace for free if anyone has that year. I just want to see what's going on with mine before going to the dealership

Does anyone know if changing the air cabin filter, while having the battery disconnected, could cause the car to go into anti theft mode???

12 mm bolts thank you

I removed engine to rebuild and this starter was one of the hardest jobs. Wire harness was the second

Good tips. I got plenum gaskets approx $30, 6 spark plugs, and luckily just 1 coil pack cylinder 2. About under $180 for sure. I think technically dealership pricings you'd be looking at close to 1k altogether. Runs great now.

Why don't you have more lighting, I can't see anything you're doing. So what's the point of putting your video on KZfaq??????

My sockets keep getting stuck smh

Hey my cooling fan doesn’t turn on unless I have the ac on. Amy thoughts?

Spokane. Who do ya call when they gangstock ur vehicle

I am getting p228c intermittently after installing a nostrum hpfp. Would this indicate the sensor is bad? My fuel trims are cranked up. I have one of the best tuners for the ltg motors so I know thats not the issue. Is there anything else it could be besides a bad sensor, or possibly the nostrum pump is defective?

Useless

How much the price of fuel pump?

Worked just fine with a 10mm for me

Thanks for making this video, huge help! 1 hour of fidgeting later, new air filters are in. Did the filter cover really need FOUR screws?! Surely 3 would've been plenty...

Thank you for your time and effort making these videos.My daughter changed her alternator by herself after I showed her your video.Think of the money she saved and the feeling of accomplishment she felt.THANK YOU VERY, VERY MUCH 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

God that was a pain in the ass