Thanks for watching! I hope you learned something. Open to feedback on how to improve my videos!! Caliper Hooks: www.amazon.com...
Пікірлер: 37
@Adam_Poirier2 жыл бұрын
Being a mechanic by trade generally I don't watch videos like this but I've never done a wheel bearing on a Nissan before so I thought I would check this out quickly. This is a very nicely done how to video and you definitely just save me from breaking off the ABS sensor lol
@robertlane6675 Жыл бұрын
It looks like the newer Rogues have a different design that doesn't have the outer ring. I am going to try and change mine out tonight. Thanks for taking the time to make this video.
@ericbowen6502 жыл бұрын
Now I'm optimistic. I've done a lot of my own work, including replacing front struts and brakes on a 1999 Voyager, but I've always been a Chrysler guy (back to that 1962 Plymouth Fury...). But now my parents' Nissan Rogue has bad front bearings, and they can't afford a mechanic. I think I can do this thing, now. Thanks a lot!
@Pingaheimer Жыл бұрын
Did you ever get it done? I have a Nissan Rogue 2015 that's making a terrifying howling noise when accelerating and a friend told me it's a bad bearing. Any tips?
@ericbowen650 Жыл бұрын
@@Pingaheimer Yes, I did the job, and it came off successfully with assistance from the advice in this video. Some tips: Have plenty of GOOD penetrating oil. I use Kano Kroil, obtained via mail order; it's the best I know. A Harbor Freight or Northern Tool impact wrench and metric socket set is inexpensive and makes the job go much, much easier. You'll need a 32mm socket for the big nut at the end of the axle. Also, it's best to plan on replacing the castle nut and cotter pin which holds it in place (Nissan dealer, although your auto parts store might have a Dornan equivalent). Have it in hand before beginning the job. Personally I'd prefer using an OEM-spec bearing assembly over the Cheap Chinese Crap which was all that my parents could afford at the time...but, well, a month after the job was completed a semi sideswiped them and the Rogue was totaled (they're fine). Would have been wasted money in the end. Good luck! Edit: As they say in the video, be very very careful of that ABS sensor and wire!
@chelseajones71363 жыл бұрын
Going to try and do mine today this video helps so much thank you!!
@FreddysCarsaAndChaos3 жыл бұрын
No problem! Be sure to watch the entire video for key details!
@briangoode56223 жыл бұрын
That ring that holds the ABS sensor in place is removable. You don't have to remove the ABS sensor (which will break). You can pry the ring off the old one (in PA it takes a lot of bending and elbow grease) before you pound the hub and bearing out. Then you can take the new ring off (much easier) and snap it back on after you install it. It's not welded or held on with anything. Just the pressure of being against the axle I believe.
@FreddysCarsaAndChaos3 жыл бұрын
Good tip!!
@jhonnyblade7022 жыл бұрын
Lol my sensor did break, unexpected $140! And yes big thank you for this video as I dont think I would have done it without you!
@FreddysCarsaAndChaos2 жыл бұрын
Super unfortunate that pretty much every car has that issue. Thanks for watching! Glad it helped you out!
@Toddbergstrom2 жыл бұрын
Should’ve watched this after mine today, had to angle grinder off the threads up until the cottage pin hole
@johnvolino4633 жыл бұрын
Helped a lot. Thanks!
@chuncydillon2487 ай бұрын
Very helpful video
@misfiregaming75903 жыл бұрын
Appreciate the vid helped my brother a lot
@BottleJackBuddy3 жыл бұрын
Thanks for sharing.
@BillSW2 жыл бұрын
did u change it in pairs so both wheels get changed though 1 is bad?
@BillSW2 жыл бұрын
did u need to do alignment since disconnecting the strut bolts?
@luisespana87962 жыл бұрын
what error did it have? , or what made the wheel or how the fault is perceived, could you please comment
@FreddysCarsaAndChaos2 жыл бұрын
If you are asking how i knew the wheel bearing needed to be replaced, the answer is, the right front had a grinding/howling sound at highway speeds. So the owner asked me to replace bother wheel bearings just for future maintenance.
@josenicot3690 Жыл бұрын
How much does cost get fix
@thomasinewallace8312 жыл бұрын
How much do the lab repair cost. If I buy my own parts?
@FreddysCarsaAndChaos2 жыл бұрын
It books for roughly 1hr so it all depends on the mechanics rates. Anywhere from 90-120 dollars.
@Stratifying2 жыл бұрын
I'd be surprised if it doesn't come down with a RF ABS sensor code with all that tension on the ABS sensor wires...
@FreddysCarsaAndChaos2 жыл бұрын
Done it probably 50 times before and after on multiple brands of vehicles. Never a problem as long as the tension is kept to a minimum.
@Stratifying2 жыл бұрын
@@FreddysCarsaAndChaos Wow. I can't think of a response that isn't unprofessional or impolite.
@FreddysCarsaAndChaos2 жыл бұрын
@@Stratifying well when you start posting repair videos you can do them your way? Sounds fair to me.
@Stratifying2 жыл бұрын
@@FreddysCarsaAndChaos I've been reparing cars professionally for 40 years, and have had my own shop for 26. Master ASE and L1 since '88. I don't have the time or the desire to be a "UTube Star" like you. I'm also sometimes too busy fixing other shop's F'ups and "repairs."
@FreddysCarsaAndChaos2 жыл бұрын
@@Stratifying proud of you. You can stop commenting any time you know that right. This is a friendly channel. Why are you watching this video if you are a master tech.
@Suzukimoto242 жыл бұрын
Had a girl in ag class get hit by a wire from across the shop in her eye ball
@MrGarcon983 жыл бұрын
AAAAAA+
@carolyngreen54585 ай бұрын
It would be more helpful without music..
@FreddysCarsaAndChaos5 ай бұрын
Opinion noted.
@jamesjohnson86613 жыл бұрын
Wtf is the constant clicking noise? Very distracting.
@FreddysCarsaAndChaos3 жыл бұрын
It might be the song that's playing in the background. Sorry about that.