2013 Audi Q5 axle Replacement

Рет қаралды 9,338

Күн бұрын

Hi guys, another repair video hope this helps out whoever is doing a Audi Q5 axle Replacement. This should also works for all the Q models. don't forget to subscribe. Thanks for watching
Donations plan: Put money together to buy a car/give money for a random family that is in need for a car or donate the money to them due to hardship at the end of the year. Any donation will help and thank you. I will be recording the full giveaway
Venmo @VangAutoCare
Merchandises
teespring.com/stores/vangmotive
Follow me on social media--------------------------------------------------------------
/
snap chat @vangtune

Пікірлер: 41

@kevinhowe8080 9 ай бұрын

Very good instructional video. Brief, succinct, and very clear explanations. Thank you!

@alesdiy1249 2 жыл бұрын

This is very helpful, thank you!

@strictlyaudis7012 7 ай бұрын

Good job bro , solid vedio

@yusuihang 2 жыл бұрын

Just stumbled on your channel. Saw the Camry timing cover video also. Like your descriptions of the jobs. Very helpful. Hope you will find the time to continue posting. Thanks.

@vangmotive7023 2 жыл бұрын

yes, will be posting up again. had to take a break to catch up on multiple projects and repairs

@yusuihang 2 жыл бұрын

@@vangmotive7023 I remember stumbling onto South Main Auto's channel, when he had around 3k subscribers. I'm sure your channel will do well when you start posting again..

@RogueMadison Жыл бұрын

There is absolutely no bolts sizes or axle nut size mentioned in this video 😮😟

@supersaiyanyaaj4219 2 жыл бұрын

Very well done VM, the pinch bolt you remove seem very easy, I'm in the cold climate area midwest and having issue removing the pinch bolt. What are some other trick or idea to remove it with regular tools.

@toounique77 17 күн бұрын

Does turning the axle disturb the timeing?

@loliveirajet Жыл бұрын

🤙

@chemaeduardo145 8 ай бұрын

Ur a God kid I hope my shit comes out as smooth as that

@francishuxley5928 Жыл бұрын

Just did this in the driveway....didn't touch the supension....just unbolted the bolts, the axle then just slides out, turn the wheel to get access.

@bretteagan5936 2 жыл бұрын

Nice video! Have you replaced the right rear axle as well? I am having some issues. Thanks

@vangmotive7023 2 жыл бұрын

I have replaced them, just no video of it. What issues are you running into?

@bretteagan5936 2 жыл бұрын

@@vangmotive7023 the angle of the axle only allows me to remove the end near the transmission up instead of down. Now I have removed both ends of the axles. It is stuck in the space of the transmission and fuel tank on one end and part is still in the wheel baring on the other end. Thanks

@vangmotive7023 2 жыл бұрын

@@bretteagan5936 can I get your email I will forward you a picture of what you need to take off on the wheel bearing side to pull the axle out.. you will need to use a floor jack underneath the lower control arm and put some load on it and undo the shocks and 3 other bolts and remove the spring to flop the Knuckle so you can get the cv axle out.

@MatthewSmith-to1hz Жыл бұрын

are the axel bolt threads reverse threaded?

@vangmotive7023 Жыл бұрын

No. Its just tight, impact gun won't touch it if it has not Been taken off before. You'll need a strong breaker bar.

@lengengineer2050 Жыл бұрын

Hi , that’s great video I have a question if my cv axle leaking oil only one side so I have to change both side or just one side only? Thx

@vangmotive7023 Жыл бұрын

Just the one side that is leaking.

@lengengineer2050 Жыл бұрын

Yes only one side leaking

@lengengineer2050 Жыл бұрын

So I have to change both side better than one side or change one side leaking only

@vangmotive7023 Жыл бұрын

@@lengengineer2050 I would just replace the one that is leaking

@lengengineer2050 Жыл бұрын

Thx for your reply

@soundnstyl 2 жыл бұрын

Do you recommend the aftermarket axle or should I go OEM?

@vangmotive7023 2 жыл бұрын

You can do remanufacture. Usually what I tell customers. I recommend oem parts for brakes because it stops the car. Alternators, water pump or anything internal in engine and fuel pump oem because these things can cause the car not to start. Ac compressor, ps pumps, starter and other things like axles can use alternative brands.

@HristovRumen Жыл бұрын

You should not discard an oem axle for an aftermarket. These axles are hollow and balanced really well. Putting an aftermarket axle in an euro car will cause a driveline vibration in 1/2 cars. You only have 2 options. To reboot or to replace with an oem if ypurs is too far gone and clicking.

@davidbijaram5385 2 жыл бұрын

hey, nice video, what are the symptoms of a bad axle?

@vangmotive7023 2 жыл бұрын

Clicking on sharp turns, vibration under accelerate and a hard shift into gear when put into gear.

@MiguelReis73 Жыл бұрын

Nice video, but that axle bolt is a stretch bolt, so when you remove you need to replace it :)

@HristovRumen Жыл бұрын

It's not. It has a few dabs of threadlock when new. Clean it and put a dab on it. It becomes reusable.

@daveallyn007 10 ай бұрын

where did you order the axle from

@vangmotive7023 10 ай бұрын

We have a parts supplier, they don't sell to the public only to business.

@RandomYoutuber1023 Жыл бұрын

Good thing you didn't stretch the brake hose the whole time...

@vangmotive7023 Жыл бұрын

Yeah, releasing it off the bracket will give it some room to move around. It will stretch slightly when removing it off the knuckle, but not much. Keeping the knuckle towards the front of the car will keep the brake hoses loose.