2014 Ford Fusion 2.0L No Power Steering A Lot Of Messages C200B:29 Steering Shaft Torque Sensor 1

Рет қаралды 11,186

Күн бұрын

Join this channel to get access to perks:
/ @robertdotterer
Today we have a 2014 Ford Fusion 2.0l that the customer bought in with the complaint of no power steering. They said they had it at the Ford dealer and were quoted $3,000 for a new steering rack. The customer said they may have jump started the car backwards. The dash says "Hill Start Assist Not Available", "Service AdvanceTrac", "Steering Assist Fault Service Req'd". Follow along as we go though trying to figure out what is wrong with this car.
Codes:
C200B:29 - Steering Shaft Torque Sensor 1
U0420:00 - Invalid Data Received From Power Steering Control Module A
Tools Used:
Autel MaxiSYS MS909:
www.aeswave.com/Autel-MaxiSYS...
0:00 Intro
0:15 Confirming The Complaint
1:10 Full System Scan
1:30 Clearing Codes.
2:00 Looking At Electronic Power Steering Data
2:30 Looking At A Wiring Diagram And Checking Fuses
7:29 Looking At Repair Information
8:09 Visual Inspection Of Steering Rack
8:41 Fixing Wires
9:10 Wires Repaired
9:20 Testing Power Steering
10:07 Checking For Codes
11:56 Test Drive
12:40 Looking At Electric Power Steering Data
13:30 Final Code Scan

Пікірлер: 36

@user-gg1gj4lm7u 7 ай бұрын

Thanks for the video. I had the exact same thing and in the same spot on the wires.

@RobertDotterer 7 ай бұрын

Awesome, I am glad it helped!

@arthurfricchione8119 Жыл бұрын

Thanks for sharing Rob. Have a good one 👍

@RobertDotterer Жыл бұрын

Thanks for watching!

@cameronfroberg6920 4 ай бұрын

@@RobertDotterer what scan tool do you use I would like to know

@arthurnelson6524 6 ай бұрын

Thank you very much, very helpful vedio

@RobertDotterer 6 ай бұрын

I'm glad it helped you.

@iguardwisconsinberry8830 Ай бұрын

I have a 2014 ford fusion titanium, bought it in 2020. My dad and I replaced the steering rack 4 or 5 times now. Can't afford a mechanic to look at anything anytime soon. Just replaced it maybe 2 months ago, and just today, I felt the steering wheel stiffen up rotating back from a right-hand turn. Dont think we ever checked wiring very closely or fuses. Sure am getting sick of this car though but I'm stuck with it at the time being.

@sfgcggf2900 2 күн бұрын

Remember to check control module and see if you can get it replaced. Either way fuses and make sure you use OBD scanner for better convenience

@styleauto1025 10 ай бұрын

Good video good diagnose

@RobertDotterer 10 ай бұрын

Thank you, I am glad you liked it.

@bartscave Жыл бұрын

Thanks!

@RobertDotterer Жыл бұрын

You're welcome

@cameronfroberg6920 4 ай бұрын

What type of scared tool are you using?

@jimmy9328 5 ай бұрын

Hi Robert, what kind of Scanner are you using Please?

@edvinasp7946 Ай бұрын

It is autel but launch is better. I have both so I can tell which is better

@DJ-tn7vj Жыл бұрын

Bro. What kinda of animal that client have in their yard? Looks like a large one got up in there. No amperage from the motor was the key to this diagnose. Solid find and work

@RobertDotterer Жыл бұрын

Probably a ground Hog.

@DJ-tn7vj Жыл бұрын

@@RobertDotterer lol

@sethkalina9930 Ай бұрын

Where are you located?

@AJayMott-pc5lk 4 ай бұрын

please help i had same exact problem animal chewed through wires, so i fixed them but when i turned on still did not work. checked fuses, all good

@RobertDotterer 2 ай бұрын

I would scan for codes and test the wires. You can get all this info in service information from Ford.

@caseyritter3185 22 күн бұрын

Hello, I have the same problem, have you found out what the problem is. This is the second time I have had a rodent/squirrel chew through my power steering wire. First time I spliced it and started it up and it worked fine, this second time I spliced it and not working, I too checked fuses etc, no luck. Please let me know if you sound anything out

@styleauto1025 10 ай бұрын

Under the other fuses box

@user-gg1gj4lm7u 7 ай бұрын

How did you get the connectors off?

@RobertDotterer 7 ай бұрын

What connector off?

@user-gg1gj4lm7u 7 ай бұрын

2-3 inches from the repair splice. I took the red clip out of the connector but It just would not unplug, so I had to splice it together on the car.