2015-2021 2.5L Lexus NX200, NX300/2013-2018 Toyota Rav4 Oil Change

Рет қаралды 3,416

Жыл бұрын

In this video, I walk you through a step-by-step oil change on a Lexus NX300. The oil change process can be duplicated on the years 2015-2021, and 2013-2018 Toyota Rav4's.
Tools Required:
3/8 Ratchet- amzn.to/3SYoJU9 (Paid Link)
3/8 Extension - amzn.to/3Eiq97V (Paid Link)
14mm Socket- amzn.to/3e8H3vf (Paid Link)
64.3mm Oil Filter Socket- amzn.to/3e4S6Wo (Paid Link)
Parts Needed:
0W-20 Oil, Full Synthetic 5.2 Quarts- amzn.to/3Czlptu (Paid Link)
Oil Filter: 9972- amzn.to/3MejCgK (Paid Link)
Our channel uses product linking and affiliate marketing to help support some of our ventures. Please consider clicking the links above to purchase parts and tools. We work hard to compile a comprehensive list of tools and parts you'd need to follow along with our step-by-step. As an Amazon Associate, I earn from qualifying purchases.

Пікірлер: 13

@roccol3110 Жыл бұрын

For a correction here, the RAV4, RAV4 Hybrid and the NX300h have the 2.5 2AR-FE engine. The NX200t/300 has the 2.0T 8AR-FTS engine.

@uav-usa-texas4010 Жыл бұрын

Another great video from the All American Garage. Thank you.

@andys5203 Жыл бұрын

Awsome video. Thank you sir.

@AllAmericanGarage 9 ай бұрын

Thank you for the feedback, I appreciate it!

@njsongwriter Жыл бұрын

I believe this should be a 2.5 liter engine. That's what's in our 2009: RAV4.

@AllAmericanGarage Жыл бұрын

You are right, the 2.5L is an option for the RAV4’s. However, depending on year and trim of the vehicle, there are also 2 2.0L options for the vehicle.

@stevensevek6151 Жыл бұрын

@@AllAmericanGarage In 2009 in the USA there was the 2.5 liter four cylinder and a V6 option.

@stevensevek6151 Жыл бұрын

You keep saying o-ring... Don't you mean crush washer? I could never tighten that oil filter cap by hand to 25N•m (18 ft.lbs.). I'm sure I would have to use an oil filter cap wrench attached to a ratchet.

@AllAmericanGarage Жыл бұрын

Yes, the crush washer for the drain plug. I’d be careful attaching to a ratchet. It’s extremely easy to over-tighten with a ratchet. I ran my torque wrench on 18ft-lbs, once it was torqued I checked it by hand. I was still able to get about a quarter turn out of it even once torqued.

@njsongwriter Жыл бұрын

@@AllAmericanGarage Well our vehicle has the same design. I am unable to screw it on until it reaches 18 ft.lb. just with my bare hand. You must be a lot stronger than I am. And a torque wrench IS a ratchet, is it not?