I didn't think I could do it at first but after watching you I got in there and successfully changed the bulb. Yes you did help someone today. Thank you!!!!!!

Thanks! Just save a ton of money doing this myself. Instructions were spot on!

Thank you!!!!!! Your final advice on video was to drop wiring low in front trim and use two arms. My husband, son, and I spent over 2.5 hrs, taking turns. Your advice kept me from giving up and finishing this job on my own....YES! I had to lay under vehicle with arms over my head, and go by feel and logic. Didn't help that the old bulb was stuck though.

I’ve had the bulbs for this forever and have not been able to figure out how to change them until watching this, so thank you!

You saved me $200! I was able to do this by feel without removing the tire, just loosening the splash shield and reaching in. Slide the bulb out, put the new one in and twist it back into place. Helps if you have tiny feminine arms too haha! Can’t see but once you do one side then other is a breeze

The auto shop wanted two hours labor to do this, definitely going to do this myself, thanks for the great video and information...saving me $200

Ford now offers a life time warranty on their engines and drive trains... they should do the same for their bulbs. Ridiculous that this should be so difficult, but clearly the dealers are telling FoMoCo they want some business in their maintenance shops. Thank you for posting.

Great tutorial... That freaking car has no space to work what so ever... it is very tight...but with lots of patience got it done.. !!! Thanks

Ford really did their best here to make it super awkward to replace a darn bulb 😡

Thanks a bunch Nestor! You are absolutely the MAN!!!!

Thank you I changed mine today. God bless you.

Thanks for showing the way. I took my wheel off which made the access easier.

Thank you. 15 minute bulb replacement using your directions 🕺🏼❤️🇨🇦

great job man, thanks

Good god, makes think it would be better if the driver’s one would just burn out! Thanks for posting as I now know it would likely take me and my abilities all day!

You did help... Thank you.

Followed your procedure with the addition of removing the tire. My arms and shoulders are larger than yours. Successfully replaced the bulb. Used surgical glove on one hand to put new bulb in, because you don’t want to Touch new bulb and get oil from your hands on the bulb causing premature burn out.

Those bulbs were a bitch to get to. I ended up taking off my tire but in the end I finally got my blinker working again. Thanks man your video helped alot for a guy that doesn't work on cars. So keep on keeping on!

Thanks, it looks like this is going to be fun

Thanks again I had to use both hands like you said 💯🇺🇸🇵🇷

Thank you!

Ford Escapes suck! These bulbs, you have to remove the wipers and cowl to replace the battery, the cabin air filter is a nightmare! My next will be a Honda CRV. But this video is awesome! Thank you!

Thank you! 🤘❤️

Thanks man

I found it was easier to unclip the wire to the bulb holder. Then I twisted the bulb/holder out and removed it. I then put the new bulb in the holder, twisted the holder into the housing, and reclipped the wire. This allowed me to do it with one hand inside instead of two. My arm was too big to fit otherwise.

Thank you!!😅

Yo thanks I'm going to change all my lower lights fog,turn n parking, side marker lights to LED👀💯👍🇵🇷

Gracias hermano orita mismo lo cambio el mío!

You definitely helped. Do you know what bulb number it is?

I’m just wondering if you can take that black grill off instead?

2014 Escape 1.6l. The easiest way to replace the driver side turn signal bulb is to remove the air filter cover & filter(4 x 8mm bolts). Then remove the lower filter housing (2 x 8mm bolts) on the left side close to throttle body tube. Unhook One other strap on intake piece. Bottom lifts out easily.

Can i ask you something ? When i unlock my ford kuga, there is this yellow light that turns on in the fog light. What bulbs is that ?

Hola. Pudieras darme el link para comprar esas luces? Las de color naranja.

2014 Escape 1.6l. On the passenger side….I was able to drive my escape onto ramps. Remove the splash guard like you do to change oil and reach in by the washer tank. There was enough room to get the turn signal bulb out. I didn’t try the running light or fog light bulb. You might try that method to confirm.

What kind of bulb did you use? Is that 3157?

how hard is the other side (driver Side)?

Carnal este tipo de foco está en la 2019 Ford Escape s.e sin los focos de niebla?

which bulb would you get to replace this?

If you arm is small enough, you can reach in from the top and change the bulb with one hand. My wife just did it. You don’t have to remove anything. It’s not easy though

Looks like you were delivering a baby

Well Ford....I love my Escape but you seriously need to fire the idiot that came up with this. I could literally change all 4 headlights in my old Camaro in the time this takes.

What was the name of the bulb, good video by the way, thanks..

Did not show the bulb tho

You guys are mechanics?? Because you're doing it the hard way

what a pain in the ass

Yo, the drivers side is different.

You don't need 2 hands, after you peel back the inner Fender well, which is plastic. All you do is take your hand in there and squeeze the clip on the back of the bald and remove The Wire first and then pull the ball out that way 2 hands, there's not enough room to get in there to do it comfortably, especially if somebody has never done it before!and if it says a specific size, don't say we'll change it to this size and metric, that's not how it works. It's a specific size for a reason when you switch it up to metric, it's either too small or just a little too big and you can go ahead and screw up. Plastic clips and plugs and screws and bulheads as well. Exclaimed information point. Please be very thorough when you're instructing. People on how to do things you were shown how to do things. We'll have the same courtesy to explain to other people how to do things. There is a proper way and an improper way to do things. And the reason why you're not telling people how to do it exactly is because you were never shown properly in the first place.. Because I am older than you. I'm doing this as a teaching lesson for you as well! Being in the auto repair business think of it like this.... How many times did you take a suggestion from someone who showed you and ended up? Screwing up a part really, really bad. But as you did it more you got better at it because you curticked it? You gotta be straightforward with People if you want them to Understand what you are trying to teach them. If you do it the same way that you were shown and a person ends up doing it wrong, then they might come back and complain to you. Example.... You never stressed that this whole assembly is all plastic. That the white clips that hold those clips a fragile and break real easy also that there is a screw that is at the bottom of the fender that you can't see. Also that they need a "Philips" screw driver and not just a screw driver. Never " Half ass it"

Leave it to Ford to make what should be stupid simple a royal PITA. Love their trucks and SUVS but their engineers couldn't design their way out of a paper bag.

this is waay too involved for replacing a bulb

Ford Escape is the worst piece of shit made. Even something as simple as this becomes a nightmare, worst purchase ever.

Not claire at all

Thank you 🙏🏼