If you peel the protective plastic off the screen protector on your autel touch screen will become much more responsive.
@ABLOCKANDKEY7 ай бұрын
Thanks for the tip.
@AliBabaLocksmith3 ай бұрын
Thanks for the video. Can you lease tell me which diode did you use? Volts etc ? Thanks in advance
@ABLOCKANDKEY3 ай бұрын
use 1 amp 400V. Should work evetime
@naum3837 ай бұрын
Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
@ABLOCKANDKEY7 ай бұрын
Try via obd first, that's how you can tell whether it is locked or not.
@autodiagnosticmaze91127 ай бұрын
hi 2 wires have diodes what is their resistance👍
@ABLOCKANDKEY7 ай бұрын
You can use anything from 1A/100V to 1A/200V.
@jonyovanno41457 ай бұрын
Have you tried the Xhorse solderless connectors?
@ABLOCKANDKEY7 ай бұрын
Soldering is a very important skill that I prefer to practice.
@user-fw7ik9cu7y7 ай бұрын
Thanks for the video. And there is a video how to add a key to the keyless 11g. Taureg. ?
@ABLOCKANDKEY7 ай бұрын
2011 VW Touareg: It's an IMMO-V or BCM2, same system as the one in the video.
@user-fw7ik9cu7y7 ай бұрын
@@ABLOCKANDKEY Do I still have to disassemble the BCM to read the immo date? Or can everything be done according to the OBD? I just asked the guys in Russia, they say the BCM is open, everything can be done according to the OBD. Tell me, is it true what they say here?
@ABLOCKANDKEY7 ай бұрын
if the BCM is not locked, you can obtain your CS code and PIN via OBD using IM608. good luck@@user-fw7ik9cu7y
@ronaldkakande63155 ай бұрын
Thanks for the video, Can autel im508s do it!?
@ABLOCKANDKEY3 ай бұрын
should be able to with xp400 pro
@doron25007 ай бұрын
Can't do proximity key though. right ?
@ABLOCKANDKEY7 ай бұрын
Not all of them, unfortunately. AKL situations I always try a semi-smart if there is a slot, even if it was a prox system.
@doron25007 ай бұрын
@@ABLOCKANDKEY does that work every time on proximity system with IMMO V?
@ABLOCKANDKEY7 ай бұрын
I had better luck with Porsche's BCM's than VAG's.
@naum3837 ай бұрын
Good afternoon! how to determine which bcm2 is locked? what happens if you try to read a locked bcm2 without removing the protection? or if you try to remove protection from an unlocked bcm2? Will the original data be damaged?
@bogdan75556 ай бұрын
For make the dealer key need data synchronization on all key lost ! is not possible program key only from read data sc code ,need bay data!!! To program key .
@BradJonesGoKarting6 ай бұрын
Erm no? Only A6, A7 and A8. Not A4, A5, Q5
@ABLOCKANDKEY6 ай бұрын
You need sync data for MQB. This is not the case.
@salvadorgamino1027 ай бұрын
where you get those wires
@ABLOCKANDKEY7 ай бұрын
IM608 should come with some. Amazon Or make them yourself, not complicated.
@yaroslaubanchuk67796 ай бұрын
Can you make a dealer key with this data or do you need something else?