2016 Nissan Quest Spark Plugs V6

No video

2016 Nissan Quest Spark Plugs V6

Рет қаралды 26,818

Күн бұрын

2016 Nissan Quest with a 3.5 Liter engine in need of spark plug replacement, Im going to walk you through the entire process to get the job done. All tools used in the video are linked below for your convenience. Thanks for supporting this channel.
MERCHteespring.com/...
Stickersteespring.com/...
Bosch Drill/Diver Kitamzn.to/2KTY4H4
Milwaukee 3/8 Ratchetamzn.to/3dcHui2
Milwaukee 1/4 Ratchetamzn.to/2KXbfHu
Milwaukee Batteriesamzn.to/2SuHTV9
Milwaukee Chargeramzn.to/2KVQM5Q
Spark Pluck Socketamzn.to/2xuf0B0
MotivXTools3/8 Socket Setamzn.to/3feVLwn
MotivXTools 1/4 Socket Setamzn.to/2yeUkxv
Wiper Arm Pulleramzn.to/2WpwK8X
Phone Tripodamzn.to/3ffNKHz

Пікірлер: 118

@marcusvinicius7510 2 жыл бұрын

It’s ridiculous how many parts we need to remove in this car to have access to this plugs. If wasn’t this video I’d be lost. Thank you so much!

@Grumpygus94 Жыл бұрын

Holy crap this is INVOLVED. This is what i was hoping to not find out about this job.

@prizmpromise 4 жыл бұрын

Thanks for the great video. It took about 6-7 hours, but we got it done. Watching this really helped.

@HomieHektor 4 жыл бұрын

Steven White awesome, next time it’ll take half the time

@user-fl8pd8zm5l 11 ай бұрын

Followed the video to a T.start to finish it took 3 hrs. One of the best videos I have ever watched. Well done Hektor

@isabellerininger6249 5 ай бұрын

Thanks man! My husband is doing this on my Quest right now. SUPER HELPFUL!!!!🎉

@LosCardenitas 3 жыл бұрын

Once again thank you for this video. I was able to do this job on my 2015 and thanks to you I felt confident and was successful.....

@CCharlesHahn 4 жыл бұрын

Definitely a great tip to keep fasteners separated into groups; a trick I learned from my dad is to use muffin/cupcake pans for this. Keeps things from rolling around on top of the cabinet or accidentally getting knocked off and lost.

@DriveCarToBar 3 жыл бұрын

If you have an old spinning disk style hard drive kicking around, open it up and grab the magnets out of it. You can epoxy them to the bottom of any tin or tray and it will now stick to any steel part. You can drop hardware in it and it doesn't roll around or fall out, and the whole tin stays where you put it. These are usually rare earth magnets too so they're pretty strong for their size. Add a couple magnets if you're trying to hold longer screws or bolts.

@simskc 9 ай бұрын

Just wanted to thank you for this video! I just got finished with my wife's 2015 which was nearly the same. One of the old ignition coil boots did come off and get stuck on one of the plugs that I had to dig out, but other than that, this video helped tremendously.

@RYANoyfoyffoyfoododydto 4 жыл бұрын

Good to see you get back to what got you to the dance my friend, I will personally be buying some merch. Love watching your channel

@beejayramsaran1684 2 жыл бұрын

Great job , your the only person to have a video of replacing spark plugs .

@HomieHektor 2 жыл бұрын

Thanks for subscribing 🤝

@ismaelruiz3413 4 жыл бұрын

Good job with the work. Very well explained. You make it look easy.

@juniors9699 4 жыл бұрын

I'm glad you back at it bro doing the work you love at home.

@user-er1yy9zb2k Жыл бұрын

The best diy tutorial

@michaelmurray8668 3 жыл бұрын

This was very helpful I just did my wife van today after watching this. I was going to take it into dealer but saved the money. Thanks for a great video

@CiGaRRo65 4 жыл бұрын

I am glad to see you working on cars again.... esa es nuestra chingadera man !!! The cars.

@wyattoneable 4 жыл бұрын

Wow, so much plastic just to get to the plugs. Great editing and easy to follow steps.

@fastrice3461 4 жыл бұрын

Nice to see you back wrenchin’!

@haroldtsosie1981 2 ай бұрын

Wow, awesome vid bro! Thanks for the step by step instructions, very informative and thorough explanation. 👍

@ranct1815 4 жыл бұрын

Nice, #Hektor you back in the chingadera, good to see your back in our game... God bless 🙏🧰👨‍🔧

@savagevargas9299 4 жыл бұрын

Beautiful Editing, 20 minutes went by fast, way to keep us engaged.

@robertmedina6875 4 жыл бұрын

Great video Homie!👊👊👊💯

@LC-sr9jf 4 жыл бұрын

Savage Vargas damn nice profile pic

@Elzanto 3 жыл бұрын

Chingon

@lilbil235 Жыл бұрын

This is the best most understandable video I've seen.

@mrkindmoon Жыл бұрын

That's why I like older cars, it's was so easy for any parts replacement, you did great job all That's just for spark plugs replacement, I have nissan quest 2013 and I thought will be normal for this service

@charlesshankle3178 4 жыл бұрын

Nissan's are a pain in the ass. Had this job and a thermostat this past weekend, double whammy.

@davenwhitlowe6237 4 жыл бұрын

I enjoy your videos Hector.

@dirkg7062 2 ай бұрын

Thank you so much for your detailed video. It helped me big time.

@meeposito 4 жыл бұрын

Hey bro, great videos! Coming to you from London Ontario in Canada. My wife is from Latin America and I went up to her and asked her what chingaderas means - she just gave me a scowl and told me not to say it in front of the kids! Funny thing - we got a new hamster and I told the family what if we named it Homie or Hektor, and they loved it!! lol Mark

@4wd35 3 жыл бұрын

Doing this today on my wife’s 2011 Quest. Thank you so much!!!!!

@ANSON66666 3 жыл бұрын

how long did it take you? 3-4 hours? and how many miles you have on you 2011? I had one 2012 Thank you

@4wd35 3 жыл бұрын

@@ANSON66666 118k, it’s was bad at all. It took about 3 hours at most.

@ANSON66666 3 жыл бұрын

@@4wd35 thanks, I would like to try when it turns warmer, so first time spark plug change at 118k miles?

@4wd35 3 жыл бұрын

@@ANSON66666 yes

@vincentvillanueva214 4 жыл бұрын

Such a nice job sir! Well done and very informative. I’m in South Korea and about to have a local mechanic do this on my 2012 Nissan Quest. I was wondering how many hours of labor they might charge me. Thanks for mentioning 3-4 hours to take manifold off. Believe it or not, labor is much cheaper in Korea BUT it’s not very cool to take a Japanese made vehicle to a Korean auto shop. Good thing I’ve established a good relationship with the mechanics:-). Bless you!

@HomieHektor 4 жыл бұрын

Vincent Villanueva Thanks for subscribing 🤙🏼

@felm3283 4 жыл бұрын

Master Hectooooooor you always do it great job.

@PhillyDee215 4 жыл бұрын

Curious, how much would u charge for this job? Or compare your price to like one of the shops you've worked in.....

@Luiz33de 4 жыл бұрын

Philly Dee I work at a Nissan dealer and we charge 3.6 hours for any car we have to take the manifold off for. 👍

@djdev3077 4 жыл бұрын

I would've definitely put in 3 new rear coils also,all that work for just replacing plugs,

@reginaldbrown9676 5 ай бұрын

This was a great video well done Heckror nice and clrear video.thankyou very much.

@jimc3678 4 жыл бұрын

Homie is gettin jobs on his own; without the middle-man (Firestone). Good to see you doin what you do best! --Now get that orange weed wacker (i saw in the background) and go cut the grass.

@darthganu 2 жыл бұрын

Thank you Hektor. I have a 2012 model and I'm a bit intimidated with what needs to be removed before I can even have access to the rear spark plugs.

@brucevanderson7585 2 жыл бұрын

Hey Homes!!! Well done!!! Great tips... Really enjoyed your presentation...

@Angel10938 8 ай бұрын

Thank you Homie Hec ... 🙏 your definitely appreciate" 🙏

@Congarsear 9 ай бұрын

Awesome job! Thanks

@DTR0454 4 жыл бұрын

A wevito get it homie.

@CiGaRRo65 4 жыл бұрын

Can I star the engine right before we put the cover on the engine? just to make sure everything is ok with the spark plugs.

@LosCardenitas 3 жыл бұрын

Thank you so much. I have a 2015 and looks like the same steps.

@hastypete 3 жыл бұрын

VERY nice video! Thank you for getting me through this job! I laughed out loud when you called that plastic air intake box a "chingadera". I just had it out yesterday to change the battery and I couldn't figure out what the #$% this thing is for.

@HomieHektor 3 жыл бұрын

Thanks for subscribing 🤙🏼 more videos coming soon.

@DriveCarToBar 3 жыл бұрын

Nissan plastic will break lol. Doing a taillight bulb replacement is fun on a Quest since you have to take the whole taillight housing off to get at the bulbs. Quickest way to turn a $2 light bulb into a $200 housing replacement when the brittle ass plastic snaps when you try to pop the housing out.

@djdev3077 4 жыл бұрын

This is definitely a 800-1000 dollar job

@mikespine1 4 жыл бұрын

All this to change spark plugs

@richiesun9676 2 жыл бұрын

I was gonna do this myself, but now I'm second guessing it. So much to dissasemble. I'm too lazy.

@Volusiaev 4 жыл бұрын

Homi, all I can tell you is to always appreciate your children. My wife and I got married really young age. All four of our girls were smart and heading on to successful lives when one was snuffed out by drugs last week. People, PLEASE pay more attention to your children's lives. Watch out who they date!!!!! Our Selena would still be alive today if we paid more attention to the signs glaring at us!!!!! a 19-year-old woman is dead.

@HomieHektor 4 жыл бұрын

Volusia-ev Wow, sorry to hear that. My deepest condolences 🙏🏼😞

@gregoriocastillo4094 Жыл бұрын

Great teaching video, thanks 🙏👍👍

@MrVictor8979 3 жыл бұрын

Awesome video man ,very awesome. Question, is the 2012 Nissan quest S similarity to the 2016 the one you was working on. You got my subscription loco. Good job 😎🤙

@HomieHektor 3 жыл бұрын

It should be pretty similar, remove wiper cowl, remove intake, remove spark plugs...

@MrVictor8979 3 жыл бұрын

@@HomieHektor thank you sir

@PhillyDee215 4 жыл бұрын

Great video!!!

@algage9280 3 ай бұрын

Awesome!!!

@dugongpinoydugongtresskapi3546 2 жыл бұрын

Sir can you make video Nissan Quest radiator replacement thanks

@OneLegged-honda-mechanic 4 жыл бұрын

Gotta love Nissan engineering, 😂

@israelcamacho7055 4 жыл бұрын

Estas cabron 20 min stay home ese

@humbertogomez2225 3 жыл бұрын

Dude, you are good.

@ttautogarages Жыл бұрын

Great job.. But do you really afto remove. The winshield wiper..

@GHOSTRIDER-ky6pt 2 жыл бұрын

very helpful nice work but man that is a lot of steps to get to , looks like a lot of work and I only have manual tools, I started video excited but now I'm worried lol

@charlieg.6242 Жыл бұрын

Nice job Hector, thanks. How long did that take in real time? I'm trying to estimate how much this will cost me at the dealer.

@67elky87 4 жыл бұрын

Hey homie, where can I get the blue gear sticker? Que paso I don’t see it? Aye way!

@JOHNdOE-yy2ld Жыл бұрын

Great video might suggest torque specs for intake bolts.

@Templateideas097 2 жыл бұрын

Not gonna lie, the more work I do on this van, the less I like it. Just replaced the MAF sensor and it was a bear(no room to work)! I feel like the engineering team heavily favored Nissan and not the consumer.

@NativeAmericanSwag 2 жыл бұрын

Great work! But what spark plugs did you use to replace them? I'm having an issue after replacing my 2013 Quest my van isn't staying turned on, and it shuts down after all 6 spark plugs have been charged! I used Autolite iridium as I wasn't able to find OEM. I've also never had this happen before with any of my other cars, but then again I've mostly worked with American cars is it because Nissan uses another brand, or is there another issue? 🤔 PLEASE HELP THANK YOU!

@HomieHektor 2 жыл бұрын

I wouldn’t use AutoLite on Nissan but that shouldn’t keep the car from staying on. Make sure everything is connected on the intake manifold, vacuum hoses, connectors etc…

@konstantinusstoyanov9749 2 жыл бұрын

Thank you, nice content

@ambrosiohernandez2898 4 жыл бұрын

I’m trying to find a website that offers great service and repair manuals. Which do you recommend? I’ve tried Emmanuel and it’s no good for me, they sent me a owners manual 🤦🏽

@HomieHektor 4 жыл бұрын

Ambrosio Hernandez MitchellOnDemand is AllData

@erikbaergas6649 3 жыл бұрын

Homie Hector the size of the socket for the spark plugs

@HomieHektor 3 жыл бұрын

It’s a 14mm spark plug socket. Che vi the links in the description, I put it there for you 👍🏼

@erikbaergas6649 3 жыл бұрын

Thank you , do you ever try it change transmission fluid in a nissan quest 2016 if you have a video can you share it 😢

@thedudeofshaving1749 4 жыл бұрын

First

@YuriVargasDIY 4 жыл бұрын

Que rico trabajas, chequeame mi aceite 😉😘

@randyanderson4360 3 жыл бұрын

Hey Hector! Were you ever a ASE certified mechanic before you started doing you tube videos?

@HomieHektor 3 жыл бұрын

Yeah I have all my ASEs A1-A8 and the L1

@randyanderson4360 3 жыл бұрын

Make more $ being your own boss?

@nileshprasad6908 3 жыл бұрын

Great video Homie!! Are there any torque specs for intake manifold bolts?

@snakejr.9196 Жыл бұрын

I had to replace my throttle body, intake hose, and MFS on a 2013 nissan quest. Afterward, i cleared the code, but it still ran a little rough. Another code came up. Cylinder 1 misfire. Do i need to replace all spark plugs?

@nileshprasad6908 3 жыл бұрын

Hi Hektor, Do you mind sharing video on how to change replace VVT solenoid on new Nissan quest? I have 2011 Quest and getting P0021 Code for VVT solenoid. I couldn't find any video on KZfaq. Was hoping get some ideas.... Thank you in advance...

@deadpoolfanboy3012 3 жыл бұрын

Well it has taken me 4 hours but I did it

@haihengh 9 ай бұрын

My 2012 never change spark plug, currentlt at 170k miles, the car start having emission error at summer, seems fine at winter, also during uphill start the car barely moving for at least 5 seconds before reving up and moving, also between 1st and 2nd gear I can feel the kicking, not sure why. Around 35 miles per hour i start hearing whining noise, it get louder and louder as I go faster until around 65 mph, it stays around the same noise level from 65 to 80. What would be the issue?

@northernedgebullies7079 4 жыл бұрын

Hey homie hektor, I have a question regarding my 2014 Nissan Versa..I replaced the front left wheel bearing, and I think I put it in backwards..I got an abs code front right sensor!! Should I be worried?? Is the car safe to drive?? What do I do to fix??? Please help!!

@sarrel48 4 жыл бұрын

Hector where can I purchase those,gloves from I like the texture on them

@castledomeknives9395 4 жыл бұрын

What did you charge....3 MILLION DOLLARS!😉😉😁

@beejayramsaran1684 10 ай бұрын

Does the intake manifold bolt need to be torque ?

@achap3604 4 жыл бұрын

He what type of torque wrench u recommend for valve cover and spark plug?

@way2fishy678 5 ай бұрын

What freaking socket does the job and fits into the well

@79chilaquil 3 жыл бұрын

Uno en español o este mismo video editado sería bueno Maestro

@rocksev21 3 ай бұрын

Cost for labor ?

@craighanzi1039 Жыл бұрын

Know anyone who must have a 2014 quest ? I have a construction job, it looks like I will have a new career working on my stupid van, I can't believe what needs removed for the plugs, just insane