2016 RAM 1500 - Changing Rear Pads and Rotors

Рет қаралды 26,469

2 жыл бұрын

Like! Subscribe! Share!
Rear Brake Pad/Rotors Combo: amzn.to/3woKF0N
Caliper Tool: amzn.to/2P0t9hT
Brake Parts Lubricant: amzn.to/3qhTGYA
My Favorite Tools:
Milwaukee Ratchet Kit: amzn.to/3EPeNFq
Milwaukee 1/2in High Torque Impact: amzn.to/3wolpHU
Milwaukee 1/2in Stubby Impact: amzn.to/3CWmbys
1/2in Drive Extendable Ratchet: amzn.to/3H2C7le
3/8in Drive Swivel Head/Extendable Ratchet: amzn.to/2Yveu3m
Other Products on this Truck:
Headlights: amzn.to/3eL3OmF
Wheels: amzn.to/30QcMHa
Rough Country Leveling Struts: amzn.to/31H5IQY
Front Offroad/Winch Bumper: amzn.to/3kfiVa5
My Camera Setup:
Iphone 11 pro (Main Camera): amzn.to/3flmutt
Tripod: amzn.to/3d8CKvu
Gopro Hero 7 Black: amzn.to/31pp6P9
DJI Mini 2 (Drone): amzn.to/3fs0Jsl
Sony A7III: amzn.to/39mrQkA
Follow me:
Instagram: / mjaltairy
Facebook: / mjaltairy

Пікірлер: 30

@lydiad1216 3 ай бұрын

Even I was able to do this by myself thanks to your video! Did 1 side today in 3 hours. Snapped one of the caliper guide bolts. So glad I have apt tomorrow for HPFP recall so they can take care of that bolt. Hope the next side will go easier now that I know!

@thebanjoman1963 Жыл бұрын

The only suggestion I would add is to count the 'clicks' of the brake adjuster when you loosen it and then apply the same number when you put it back. That way you're very close to the adjustment before you started. Great Job!!

@markwitte303 2 жыл бұрын

i clean and lubricate the saddles where the new pads slide with a small quantity of anti seize,

@haroldrobinson6331 6 ай бұрын

Thank you for taking the time to do such a great video. I truely was helped by this.

@MJAltairy 6 ай бұрын

Glad i could help! Really appreciate the comment!

@marcotena4158 Жыл бұрын

thanks for the video man. im fixin to change mine on my 2015 as well.

@timobrien3287 11 ай бұрын

Great job explaining all the way through. Michigan Dodge owner here to, hate the rust! Thanks

@MJAltairy 11 ай бұрын

Appreciate the support! And yes the rust aint the greatest 😂

@XIV__ Жыл бұрын

Thanks dude.

@yanceyperry7912 22 күн бұрын

you did not feed the cap top in first. they are to lock in the bracket

@kevinkelly8646 Жыл бұрын

Great job in instruction

@MJAltairy Жыл бұрын

Thank you!

@mitchtavio Жыл бұрын

Just did mine. What an awful job it was. Had to beat on the rotors for 2 hours with heat to get them off. When they came off the ebrake shoes fell apart. Had to do them too. You need about 4 hands to get the springs back together.

@raiderman8431 Жыл бұрын

so can I change the pads and rotor without taking that emergency brake cog out? and no need to pull the springs out

@juliosaavedra2314 2 жыл бұрын

This was great. Thank you for the help

@MJAltairy 2 жыл бұрын

Glad i can help!

@TrentGustus 8 ай бұрын

On my first attempt i could not get the rotor off.. i worked on it for about an hour..

@fajavfam3795 2 жыл бұрын

Can you explain in detail what’s the appropriate pressure when turning the cogwheel on the brake shoes when the new rotors were put on?

@nonagreeable 2 жыл бұрын

I just did mine now one side is smoking like crazy, think maybe the pad is sticking

@MJAltairy 2 жыл бұрын

Could also just be the oil/residue that’s just burning off the rotors fro when they were packaged. Does it coast fine or does it feel “limited” like the truck is being held back?

@nonagreeable 2 жыл бұрын

@@MJAltairy it coasts ok, I'm going to jack it up and try turning the tire to see if I feel/hear any resistance. It was a TON of smoke, I thought it was on fire at first.

@garyp9906 Жыл бұрын

@@nonagreeable Did you ever figure out what the problem was? It sounds like perhaps you tightened the rear brake adjuster too much and it was causing the brake shoes to rub, causing all that smoke. That's what I'm worried about when I do mine. If too tight, that is a possibility. Too loose and the parking brake doesn't work like it should.

@nonagreeable Жыл бұрын

@@garyp9906 so what happened was that after I changed the rotors and pads my first few drives included towing a trailer so the extra weight of stopping caused excessive smoke from the oil residue. Everything was fine after about a week. I did damage my parking brake shoes in the installation process though.

@dolo5733 Жыл бұрын

Hey man great tutorial video I will change my rotors by the end of the month is there any way I could mess this up?? As long as I bolt it on good it won’t come loose right