I've just replaced the part a couple of days ago. It does everything Honda Jon said. Thank you Honda Jon.

Just got my first Accord and loving these videos!

I just received mine today and I can’t thank you enough! Thanks a lot!

subbed, just got a 2019 1.5T going to put this on my short list

you know what! what I like you explain many times that purpose why you doing! that is good. some youtuber mostly forget the main idea!

Thanks man will try this for sure.

Adding this to my list, thanks for posting this.

I just got the 2019 ex-l 2.0. Man i love this thing. Fast is an understatement

Saying everything 3 or 4 times means I don’t have to rewind... just fast forward. But great info!

Finally decided to get this, can't wait for it to arrive and to test the results!

When I get an accord I'll be sure to do this

A lot of people are saying you'll get more vibration at idle with this upgrade but after installing it on my 2.0T Touring, I can't even tell the damn thing is on. One hell of an upgrade for $74.88 including shipping. It's way more planted and stable as everyone said too.

Hi Mr Jon I just made this modification to my 2019 honda and I want to thank you for making this video there was one thing I hated about this car and that was how slow it felt when pressing the pedal but no more now I feel like it responds faster and that's something that I really like now it feels like the car just wanna keep going. Again thank you for this tip

Got mine today. Will install tomorrow. Thanks for the vid!

Just did the mod to my 2019 Accord. Easy to complete. Part was backordered for about a month. Great video Jon.

Thank You Brother, I will look into this

Just did mine thanks again

NOW THIS is a good freaking mod video

I’ve recently did a light smoke tint 50% on my tail lights. I just ordered the hydraulic trunk rods, the trunk handle and I’ll be purchasing tail lights and turn signal lights also because of your videos. Thank you for the mods/upgrades and ideas you give me. Keep up the great work. Oh I also ordered those little rubber mat thingys that go into cup holder, in the doors, etc.... those were great.

Sounds like a good deal. It’s definitely a motor with torque potential. That mod will definitely deliver the power more efficiently. I have to pay more attention to the nose rising before I install the mod.

Thanks for this! This will be next on my agenda

You got your first mod for performance Jon awesome.

I know im late to the party by 4 yrs but ...just noticed my 21 sport 2.0 has 32k on it all stock daily driver my upper has a crack that has formed. Its being replaced under warranty next week but i ordered one from honda in ohio and will take the new one under warranty and have them put in the 6mt..great video

Thanks man, you got me excited😂

Thanks for this info...i bought this mod and it really makes huge difference. The car accelerates much faster and in general much more fun to drive. However as suspected it does increase the vibration a little. Unfortunately this is my wife's car and she care for vibration more than acceleration. If anyone want to get this part let me know. We can figure a deal.

I found your channel on a whim and man am I glad. I swapped this piece out in mt 2019 1.5 sport and you can def. tell the difference when you throttle higher speeds in sport mode. The part is back ordered everywhere, I put my order in and it came like a month later . Just be patient

Can you post a video of how it feels driving after you done this mod ?

Just installed mine!! Great upgrade

Just looked at my manual 1.5 and it’s got an extra metal bracket the also holds the torque mount in place even more just something to think about

Amazing . Thank you man!

Great information, please provide the torque on the bolts. Sorry, I missed the information disregard the question. Now, where did you purchase the torque mount and how did you pay?

Hi Jon. This is Garth. I just wanted to thank you for linking my website in this video. Chris B. from FL sent me the link. The exposure is greatly appreciated! Reach out if you need anything.

Hey Jon, great find. I'd love to do this mod but I'm a concerned about the vibration as the plastic part is designed to give as the engine vibrates. It doesn't for you, not even a little noticeable?

This is the Torque upper I was talking about in the other video .... Replace it on the 2.0 it's 4 screws and the 2 screws in the black laminate black it's fkng hard pain in the ass dude , you need a lot a patient to replace it. Takes me lake 1 hr o Little more but in the end it fits.

Awesome Vid. Please tell me where and how to blackout your wheels and moldings??? 😊

Saw engine mod and checked it out. After watching your video,I went outside to check my 2.0 and it’s the same as yours. Guess I’ll try it out to see if it really works on the 2.0

just installed mine over the weekend

I would have liked to see a before/after showing the engine vibration difference. thanks for the post.

Man, not sure where you get all this info, but damn... Thanks alot

I tried to order this part but it's on back-order everywhere. Does anybody know of a site that's still have it in stock?

Part # for 1.5T manual is 50880-TVA-A21. Looks like same part as for the 2.0T manual (50880-TVC-A21).

Do you have a gopro? Would have been cool if you mounted camera and light under hood while driving to see how much it flexes.

I'm setting here like. That's tight enough.... Dam!

hey thanks for video. i’m planning on doing this but i’ve read people saying that it gives rough idle or vibration

This is amazing! Will this fit my 1.5T CVT? Thanks!

Hey Jon, does this make the ride more ruff? Thanks for your work on the video!

Thank you for the video. I will have to try this eventually. Do you by any chance know or might have an idea of long term effects? For example, if the lower torque rod is also plastic, might that one wear out faster possibly?

Hey Jon, I know you're on a 2.0 now, but would you know of any more parts, like these, that are interchangeable between the 1.5 & 2.0? Upgrades like these are great!

Hey Jon. Went and installed the upper torque mount and it’s working great. Would you recommend or have you looked into ordering the rear torque mount?

did this and it’s really great, now I just a better lower torque mount to compensate the load equally from top and lower torque mount, any suggestions for the lower torque mount?

Have y’all seen how the new Camaro’s have that red stripe on the rim ... man that would look nice on the accord as well. Any thoughts?

Just installed this part on my 2.0T Sport. Absolutely love it. Did some spirited driving on the street and highway and the car feels much more stable, there’s less body lean and the steering feels more deliberate, provides more resistance and feels sportier overall. It even feels like it might be shifting crisper. Don’t notice anything bad at all. It now feels less like an average family sedan and more like a car in which you can do dumb s#it confidently :) Thanks Honda Jon for recommending to do this. I never would’ve thought of doing this on my own because I would never imagine that this little cheap nothing part can make such a difference. Back when I had my G37x, I wanted to reduce body lean so I upgraded to Hotchkis sway bars. Those $400 sway bars, which were a real pain to install btw, did not cause as big of a difference in that car as this $60 mount caused in this car. I wrote before that Honda should upgrade the handling for their 2021 model somehow. Well, all they need to do to it is this. Thanks again.

My upper torque mount is Hasport 62A from MAPerformance. I don’t know if that makes a difference or not, as opposed to where you guys ordered yours from. But the vibration is bad. Even my wife who’s oblivious to anything pertaining to my car noticed it. I’m thinking of sending that part back and purchasing the one you guys suggested before I put the stock mount back on. What do you think?

We own an 18 Accord 1.5t and a 22 Civic Touring. The touring tuning is much quicker off the line. It is a noticeable difference. Same driver same movements. I am not sure where in the drive by wire circuit that difference is but once Honda post the parts online it may be worth while to look at the Civic Touring gas pedal sensor or throttle sensor is to see if it will bolt into the Accord. The 22 Civic is good but it is not as refined as the Accord Honda Jon I wish there were a way to contact you besides this.

Why does the website say the part does not fit on a 2018 Accord Ex? Do they just not want owners to know if this trick?

Does it improve the vibrations at idle? Got 1.5t sport with 18.5k miles and getting slight vibrations at idle. If I can't get rid of the vibrations I'm getting a camry

Torque Strut 2018 Accord Replaced Foot lbs 82 correct Bolt torque Noticed no front end lift under load More road placement in cornering G Osborne

have you changed the lower one? prl says the lower one works even better.

Thank you Honda Jon on your videos. I've done a few of the upgrades/mods you've suggested. I just did the upper torque mount on my Honda Accord Sport 1.5T. My problem is that now that i swapped out the mount my car is vibrating, while i'm idling. while i'm turning and while i accelerate and brake. Any ideas or suggestions? I torqued the screws to 52lbs with a torque ratchet. What can i do?

Tim Allen would approve of this. More power!!

Have my 2020 accord for two weeks, defiantly getting this mod. Do you know anyone that makes chips or reprogrammers?

Gonna have to buy this. Especially since I have Ktuner stage 2

@hondajon you get a lot of comments, so sorry in advance if you already answered this. Do you feel anymore engine vibrations coming thru the cabin, or noise? How about now dive? I've heard it supposedly has a positive affect on that too

Just got mine today and installed. You can tell a difference. Biggest thing I noticed is it will shift at better points whiles driving. While basic acceleration instead of 3000 rpms it shifts sooner. Update: did my first 200 mile run today. My gas mileage went up. First time ever I hit mpg of 39mpg. I usually average 36mpg on this drive. So far so good.

I'm interested in trying this torque rod out. for $55 the price is good and the install looks quite simple. As a side note: Just curious if anyone who's watched this has installed and/or had any success with the Ktuner? I bought one for my 1.5t and have yet to actually follow through with re-mapping the ECU. :0 It's supposed to deliver pretty decent torque/power gains even for the smaller engine. Any thoughts?

Thank you very much for sharing this Jon, I’m looking forward to getting this mod to improve my ride as well. Jon I know this slightly off topic but I’m looking for your advice... I have a 2019 Honda Accord 1.5T and between 25-35 mph I get a brief hesitation in acceleration. I took it to the dealer with only 3500 miles on it and they said they can make the same thing happen for them but since there’s no trouble code coming up they can’t help me. Have you run into anyone else with a similar problem?? I’m grateful for any advice you may have

I'm having trouble locating the part, can you shoot me the website you order it from? I'm located in Fort Stewart GA. I gladly appreciate it.

Having the hardest time removing the screws/bolts. I know youre not supposed to use a torque wrench to remove em. Maybe a socket wrench is okay? But just requesting some input on that part. Also, would a torque wrench be required when tightening? Probably advised right?

This sounds great but I noticed in the engine diagram there is a lower torque rod also, i'm wondering if that is plastic also and if so you would be putting more stress on it. Does anyone know if its metal or plastic? I have not crawled in there to look yet.

Hi, will this work on a 2012 Honda Accord coupe? 4 Cylinder

Hey jon ur really helpful with the videos , questions do you know the bottom torque mount spec for Honda accord 1.5 2018

Thank you for an awesome video! I have an Accord 1.5t, 2019 and I checked the part you have on the description and it says doesn’t fit your car. Should I still purchase it and will it work? Thank you very much!

Questions- 1 can I put 2nd USB port into my 20 accord LX 2 is there a USB audio CD player that works on a 20 accord lx 3 can I install Apple play in the 20 Accord

How about for a 2018 1.5 automatic Honda Accord sport ? Would I need a automatic torque or would the Manuel work fine ??

New part number (50880-TVC-A31) just made available for 1.5T and 2.0T CVT or Automatic.

Hey Honda Jon hows it going?....I have a 2018 1.5 touring....I was trying to look for the Upper torque rod and I saw two and the 2 product number are 508880-TVC-A21 and 508880-TVC-A31 so which one do I need to purchase cause they both are the same price! So just asking which one to buy!!? Thank you

Is that exact part # the metal one instead of the plastic and any side effects I should be aware of I want to make sure I make a good purchase

Hey Jon, I looked up this product and it says it doesn't fit a 2019 Honda accord sport 1.5 Variable transmission. Do you know if it fits and that's just Honda trying to prevent you from installing it???

Ordered it but was back order until 5/7 😭

@Honda Jon I just installed mine, but i found a few weird electrical related issues, my passenger side window doesn't roll down/up, my trunk doesn't open using my key unless the car is off and when i double click the lock button on my key fob there's no sound from the car usually it has that gentle beep. anyone else experience this issue? or any suggestions? i haven't tried to swap it back yet but will do if this isn't fixed ofc.

Silly question, I just bought a 2022 EXL Hybrid. It has a non turbo 2.0 and electric motor. Do you think this would make any difference on it ?

will this part fit a 2021 sport 1.5T ?

thanx for the video , do u think we need to replace the top & bottom torque mount or just top ? ,,, tyvm

i can’t find where to buy can someone link me?

Hey Jon do you think this fits the 1,5 sport model?

Hey Jon should I get this for my automatic 2.0 sport?

Is your accord a manual trans or auto? I just bought the 2021 sport SE and it’s an auto and would like to do this if possible

Hi. I went to the site and put in accord touring 1.5t for the option where it says put your car in. It says the part isn’t available for this. Should I just order one for the 1.5t sport cvt?

Hey Jon, so how has she been running since the switch any issues? Thinking about grabbing one for my 2.0T Auto. Thx

Subscribed. I’m doing this after I add an oil catch can. Question: where did you find the torque specs? Thanks.

Hello..im new to this but it says it doesnt fit my accord 2018 1.5T. Is this correct?

Do you think if ordered thru honda parts direct website, they'll send you the original plastic composite torque rod or the metal one with the 50880-TVC-A21 part number?

After adding the torque mount...did you experience any vibrations/ rattling noises??? I'm considering on getting this but wanted to know if you had issues like that.

That's a lot more than 52ft lbs. Lol thanks for another great video. :) I just got mine today.

Jon, did you approach Honda to see if there was any warranty issues? It's been a year since you made the modification, have you had any problems? I have a 2.0 automatic and want to do the same.

I hear if you put on the 2.0t engine cover it adds another 20hp 🤫

Jon, there are no discernable vibrations from swapping this torque mount? Thanks.

This part does not fit the 2020 Honda Accord Sport with a 1.5 L engine. Any alternatives?

Will this part fit my 2021 Honda Accord I a 1.5 part 50880 manual Torque mount please let me no Thanks

Did the car have more vibrations n NVh while idling?