No video

2018-2023 Mustang Install: Steeda MagneRide Progressive Sport Lowering Springs

  Рет қаралды 35,720

CJ Pony Parts

CJ Pony Parts

Күн бұрын

Bill shows you how to install Steeda Progressive Sport Lowering Springs on your 2015-2021 Shelby GT350, Shelby GT350R or 2018-2023 GT Mustang with a MagneRide Suspension.
Purchase Product Here:
www.cjponypart...
Steeda springs are custom made to exact specifications in the US. They optimize the center of gravity and suspension geometry to improve handling with a significant reduction in nose-dive, launch squat and body roll. These springs deliver the best combination of handling and ride quality for daily driving or the track.
Check out other Steeda products from CJ's here:
www.cjponypart...
Subscribe to CJ Pony Parts on KZfaq here:
www.youtube.com...
Music Provided By:
www.epidemicsou...

Пікірлер: 79
@cjponyparts
@cjponyparts 5 жыл бұрын
Purchase Product Here: www.cjponyparts.com/steeda-lowering-springs-progressive-sport-shelby-gt350-shelby-gt350r-2015-2019-gt-with-magneride-2018-2019/p/CS8242/
@Jmab-rv7jc
@Jmab-rv7jc 4 жыл бұрын
Does anyone know if you can order the magnaride from the dealer to get it installed on a 2015 stang?
@cajunqueen1971
@cajunqueen1971 5 жыл бұрын
I have MagneRide and we put these springs on my 18 gt, I love them! My car looks so bad ass! Lowered it just enough to eliminate wheel gap, then I put 275 on front and 295 on back and gave my 255 and 275 tires to hubby for his stang!
@ericwatler23
@ericwatler23 3 жыл бұрын
How low did you lower your car and what springs? And the magnaride shocks does it ride better than stock or the same? I’m asking because I lowered my car 1.2 f 1.3 back with eibach springs AND shocks and my ride feels the same but over bumps and bumpy roads it is not good feeling like eibach should let you know this. I’m feeling pissed because I basically lowered my car only about 1 1/4 with springs and SHOCKS you would think the ride would be the same if not better .
@cajunqueen1971
@cajunqueen1971 3 жыл бұрын
@@ericwatler23 Mine was lowered 1 inch all around. The ride was fine, not any bumpier. I do not have that car anymore, and the guy who bought it, has not complained about the ride. I have a 19 GT350 now, and we did not lower it, it is stock and it will stay that way!
@abdielaponte6249
@abdielaponte6249 5 жыл бұрын
It would be awesome if you can add before and after shots at the end to compare ride height!!!!
@streetridaz
@streetridaz 5 жыл бұрын
I've had these on my car for 2 or 3 weeks now and I love them. Looks great and handles even better.
@jasonwoody8041
@jasonwoody8041 3 жыл бұрын
i just did my mag ride front springs yesterday. neat cheat, you can change the springs without a compressor with the lowering springs i got. when i removed the strut i supported the control arm with the floorjack and then remobed the center bolt from the strut assembly then lower the jack and take the lower bolts out the strut and remove the strut from the car with the loose spring on top. then remove the 3 nuts to remove the bearing cap. when i put my springs in my struts i was able to lightly push down on the cap and get 2 or 3 turns on the center nut. more than enough to get it together without a spring compressor. i used the steeda ultimate handling springs for mag ride s550.
@JesseAndMike
@JesseAndMike 5 жыл бұрын
Awesome install video! Liked!
@Coyote9smilespergallon
@Coyote9smilespergallon Жыл бұрын
If you do this, make sure you get the single piece spring compressor! I got the 2piece and that alone added time and aggravation
@Eavelar23
@Eavelar23 5 жыл бұрын
so dropping the car 1 inch with magnaride wont mess with the magnaride perimeter settings
@79chevy901
@79chevy901 5 жыл бұрын
Lowering springs is a must for a mustang!!!
@trewon1
@trewon1 4 жыл бұрын
Not with an S550 mustang. Sometime newer mustangs look awkward lowered. It depends on the kit you go with IMO.
@mustangman5402
@mustangman5402 5 жыл бұрын
Love to have this set up on my GT350, but I never get in/out of my drive way. Even at an angle.
@mustangtony2933
@mustangtony2933 5 жыл бұрын
I'm in the same boat.
@kpm134
@kpm134 4 жыл бұрын
You should try some of those rubber driveway ramps. Assuming it’s the curb that’s the problem
@Jmab-rv7jc
@Jmab-rv7jc 4 жыл бұрын
Does anyone know if you can order the magnaride from the dealer to get it installed on a 2015 stang?
@TrackDayVideo
@TrackDayVideo 3 жыл бұрын
@@Jmab-rv7jc it would probably be cheaper to sell and buy a new one ;)
@briankenny6822
@briankenny6822 2 жыл бұрын
Definitely going to order this for mine soon
@KenseisGarage
@KenseisGarage 5 жыл бұрын
Another awesome video Bill. Do you felt any difference from yours that has the Ford performance springs, other than being lower in height? 👍
@albaljeu4826
@albaljeu4826 11 ай бұрын
You mentioned having to cut the factory bump stop, but the video didn't show how to do that???
@lucasbriones4531
@lucasbriones4531 5 жыл бұрын
Awesome video! I need to order a set asap!
@gappedtoto1663
@gappedtoto1663 Ай бұрын
Did you have to trim the rear bump stops?
@Hoffyone23
@Hoffyone23 5 жыл бұрын
Thanks for the great video, Bill! Should you do an alignment after installing the springs?
@mustangmarty8491
@mustangmarty8491 3 жыл бұрын
@@anthonyconenna1886 but will it wear ur tires more? And do you know if these springs will work on my pp2 package because with this package i have the 305's and they stick out past the quarter panels..a reply would be appreciated, thank's brother..🇺🇸
@TrackDayVideo
@TrackDayVideo 3 жыл бұрын
absolutely yes
@disegnosys
@disegnosys 5 жыл бұрын
Nice video Bill.
@ColeTrickle13
@ColeTrickle13 5 жыл бұрын
I accidentally switched to half speed when starting this video...Everyone do yourself a favor and make the change so you can watch Drunk Bill install some springs hahaahahah :D
@somezak
@somezak 4 жыл бұрын
That is my dream car 😢😢
@brindlebeard
@brindlebeard 5 жыл бұрын
Anyone tried this with the 2019 PP2 setup? Curious with those 305 tires up front if there is an issue with lowering.
@speedprotege
@speedprotege 5 жыл бұрын
Wondering the same thing.
@alfre1277
@alfre1277 5 жыл бұрын
@@speedprotege me 3, also worried about loosing the stock calibration for the pp2
@tahashaikh1908
@tahashaikh1908 5 жыл бұрын
I did this and regret it everyday. Car looks better but noticbly worse in terms of handling. Spring rate is far too soft and makes the car lose a lot of its specialness.
@alfre1277
@alfre1277 5 жыл бұрын
@@tahashaikh1908 which springs you used?
@MeMyselfI_69
@MeMyselfI_69 5 жыл бұрын
@@tahashaikh1908 Thanks for the feedback. The springs on a regular GT are softer than PP2 so these may not work as good.
@daily6633
@daily6633 6 ай бұрын
Is the install the same on a s550 2020 gt magenride
@torkrules472
@torkrules472 Жыл бұрын
I see you didn't cut the rear bump stops. Is this step necessary?
@MrThePsychologist
@MrThePsychologist 3 жыл бұрын
when my mustang ecoboost came from the dealership it had none magneride how possible is to install it now?
@wtitrader7397
@wtitrader7397 4 жыл бұрын
What is the difference between the progressive and linear springs? Recommendation for a GT PP2 w/MagneRide. Looking for better performance, steering response, grip and feel very planted carving cannons. BMR, Steeda, Ford Performance, or ? Thank you Bill
@cjponyparts
@cjponyparts 4 жыл бұрын
One really isn't better than another. Progressive springs will have a varying spring rate based on compression, linears are consistent. It just depends on what you are using the car for. Many people prefer progressive because they ride a little better, some prefer linear for their consistency. All three springs sell really well, personally I like the Ford Performance. I have used them on my 18 PP1 and my 16 GT350. Not quite as low as the Steeda though so if you are looking for more drop they would be the way to go.
@victormartins4992
@victormartins4992 3 жыл бұрын
For you..probably the steeda dual rate mangeride spring will be better. This one is like stock pp1.
@wtitrader7397
@wtitrader7397 3 жыл бұрын
@@victormartins4992 I actually went with BMR lowering springs. Love them. Car is so planted. Thx
@itsathejoey
@itsathejoey 4 жыл бұрын
What about long term use? Will installing these affect the shocks later on down the road?
@joseluna7151
@joseluna7151 2 жыл бұрын
I would like to know if you need to recalibrate your magnaride after it’s been lowered 1 inch
@bripolar
@bripolar 4 жыл бұрын
Any new insight as to pp2 applications? Do these lower the car more/less due to stiffer factory springs. I spoke to John at Steeda and he said these lower the car 3/4” front and rear. Their website says 1/2 inches for pP1 and pP2. Non pp mustangs 1” drop.
@libertyjungle-musicproduct3059
@libertyjungle-musicproduct3059 4 жыл бұрын
Hi Bill ! Kw lowering springs st version are also good in your opinion??
@JohnSVT
@JohnSVT 3 жыл бұрын
Will I need to add camber plates with these coils? I have an 18 mustang GT W/magnaride
@carlosmena1169
@carlosmena1169 3 жыл бұрын
Will these fit a 2018 mustang gt performance pack level 1 without magneride?
@mustangmarty8491
@mustangmarty8491 3 жыл бұрын
Great video, I have the 2020 pp2, would these springs work? Because it seems my tires with these rims stick out more kinda concerned they may hit my quarter panels. Anyway great video keep'em coming a reply would be greatly appreciated thank's..🇺🇸 MURICA
@victormartins4992
@victormartins4992 3 жыл бұрын
Yes they will
@Topofthelinetommy
@Topofthelinetommy 5 жыл бұрын
Bill I just got my 19 GT Convertible with magneride, is this the best spring, are there any other brands, so far I've seen 2?....
@cjponyparts
@cjponyparts 5 жыл бұрын
I would say the Steeda sits a little lower, i feel the Ford Performance ride is a little better but they are very close.
@markbevilacqua3415
@markbevilacqua3415 Жыл бұрын
Is it ok to use an impact to tighten the strut?
@JDubTwins
@JDubTwins 3 жыл бұрын
Bill did you say you will or won't have to cut factory bump stops?
@cjponyparts
@cjponyparts 3 жыл бұрын
You do not have to. The drop isn't that much that they be come an issue, the owner of this car autocrosses it regularly without any problems.
@Robert-ff2kx
@Robert-ff2kx 4 жыл бұрын
Hey Bill what’s the part number for this kit?
@superfineowl
@superfineowl 4 жыл бұрын
Is it true we have to trim the bump stops on rear?
@delvinpaul912
@delvinpaul912 3 жыл бұрын
Wait what tires are they on.?
@saulfranco8641
@saulfranco8641 3 жыл бұрын
Are those work for at 2018 mustang GT PP2?
@williadawilliams
@williadawilliams 5 жыл бұрын
can you add magneride after market for the 2018?
@OEMPlus
@OEMPlus Жыл бұрын
what specs are those wheels?
@chevyhs
@chevyhs Жыл бұрын
What’s the difference between a magnaride and non magnaride spring?
@JR-us1ne
@JR-us1ne Жыл бұрын
The back springs are different.
@ericwatler23
@ericwatler23 3 жыл бұрын
Will the magnaride fit on a 2012 Dodge Charger And I want to Lower it an inch and a quarterwith eibach Springs
@Themazcorner
@Themazcorner 5 жыл бұрын
Bill how does these springs compare to the FPs you have(I have the same on mine)
@cjponyparts
@cjponyparts 5 жыл бұрын
I feel they sit a hair lower and the ride quality felt exactly the same.
@jason82180
@jason82180 5 жыл бұрын
CJ Pony Parts 😩😩😩😩😩
@Themazcorner
@Themazcorner 5 жыл бұрын
@@cjponyparts thanks for the input
@northernbeast7768
@northernbeast7768 5 жыл бұрын
What's the main difference between these and the Ford Performance M-5300-W magneride lowering springs
@cjponyparts
@cjponyparts 5 жыл бұрын
Northern Beast I have those on my car, these seem a hair lower but ride just as well.
@northernbeast7768
@northernbeast7768 5 жыл бұрын
@@cjponyparts Thanks...I have the Ford springs on mine as well and love them. A little more drop would be nice from these but I'll probably just stick with what I've got
@Jmab-rv7jc
@Jmab-rv7jc 4 жыл бұрын
Does anyone know if you can order the magnaride from the dealer to get it installed on a 2015 stang?
@ZackMuffinMan
@ZackMuffinMan 5 жыл бұрын
😃
@jason82180
@jason82180 5 жыл бұрын
This stinks. I was up in the air whether to get the FP springs for my gt350 or these. I went with FP because there was basically no info on these. I'm happy with the FP but wish they were lower. Looks like these should have been the ones to buy.
@dookie2365
@dookie2365 4 жыл бұрын
Camber bolts necessary or no?
@cjponyparts
@cjponyparts 4 жыл бұрын
No they were not needed with this install.
Installing Steeda Progressive Lowering Springs On My 2024 Mustang GT!
15:15
Daily•_•Driven
Рет қаралды 10 М.
هذه الحلوى قد تقتلني 😱🍬
00:22
Cool Tool SHORTS Arabic
Рет қаралды 52 МЛН
Meet the one boy from the Ronaldo edit in India
00:30
Younes Zarou
Рет қаралды 19 МЛН
MagneRide Suspension - Unlock the Mystery! #magneride
5:34
CJ Pony Parts
Рет қаралды 22 М.
6 Years Of Shelby GT350 Ownership
19:33
Texas Revving
Рет қаралды 84 М.
2015-2023 Mustang SR Performance Sport Lowering Springs Review & Install
22:59
AmericanMuscle Mustang
Рет қаралды 13 М.
Mustang GT350 Install: Ford Performance 20mm Lowering Springs
9:41
CJ Pony Parts
Рет қаралды 29 М.
Watch BEFORE YOU LOWER YOUR CAR!!
9:53
Code Romes
Рет қаралды 21 М.
INSTALLING THE  BEST BRAKES FOR A FORD MUSTANG GT!
12:43
Woman.Driven
Рет қаралды 101 М.
2018 Ford Mustang GT MagneRide Suspension Explained - How Adaptive Suspension Works
13:02
Two New MagneRide Lowering Springs From Steeda!
6:05
Steeda
Рет қаралды 2,5 М.
هذه الحلوى قد تقتلني 😱🍬
00:22
Cool Tool SHORTS Arabic
Рет қаралды 52 МЛН