2019-2022 Acura RDX Running Board Install

Рет қаралды 10,077

2 жыл бұрын

What you need to install Running Boards on 2019-2022 ACURA RDX
Ramps/jackstands
Car Jack
Plastic pry tool/clip removal tool
10mm socket
12 mm socket
Ratchet and an extension
Side nose cutting pliers/box cutter/little knife
Sharpie
This installation is meant for 2019-2021 RDX but since 2022 didn’t change much, I’m sure it will be the same for that model year.
Running Board link
www.ebay.com/itm/Side-Steps-F...
Free Rap Instrumental - Free Rap Beats

Пікірлер: 27

@eltorterochido 2 жыл бұрын

It actually looks easier than I thought it would. Good idea cutting the plastic with a knife and a cutter. Thanks for this!💯💯

@Jon-ki2ty 2 жыл бұрын

Amazing!! Thank you for making a detail video explaining the tools and process for this install. 👍🏽🙏🏽🙏🏽

@2418turo 2 жыл бұрын

Hope it helps you out!

@aluke6059 Жыл бұрын

So what I did was install the brackets on first, after lining them up onto the runners, and used a utility knife to cut where the brackets mount. It was just a bit easier than your method, and I did it by myself. Thanks for sharing

@2418turo Жыл бұрын

glad it helped somehow 😅

@crawfish91 2 жыл бұрын

I didn't need to take out the whole panel, as you can see it's lined to where you can cut it with a box cutter. it was simple. Thanks very easy install. i am small enough I didn't even need to jack up the vehicle, heheh.

@brainwaves1 2 жыл бұрын

Thanks for the info going to do mine soon.

@2418turo 2 жыл бұрын

Good luck. If you use ramps, you'll need to have a car jack handy because after you install the running boards, you won't be able to back the car down as the running boards will catch and hit the ramp on the rear tire. So you will need to lift the rear end to take out the ramp. I should have noted that on the video. But if you keep a car jack nearby, you can lift the ear take out the ramp and then lower the rear AND THEN back out the car from the front ramp.

@eddyngan9293 2 жыл бұрын

Awesome Video. I purchased a used running board for my 2019 RDX and it's missing the bolts that mount on the body frame. Do you know the correct bolts that I need to purchase. Also are all the mounting bolt points are the same for the RDX. Thank you in advance.

@loudpipez Ай бұрын

The Ebay link is no longer active..are they an actual Acura oem running board or aftermarket..thx..great video

@2418turo Ай бұрын

It was aftermarket. I’ll see if I can find the new link. But I got them off ebay

@loudpipez Ай бұрын

@2418turo ok thank you!

@2418turo Ай бұрын

@loudpipez www.ebay.com/itm/305322738803?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=anr1zln5rnq&sssrc=4429486&ssuid=AQ5PXklZQqa&var=&widget_ver=artemis&media=COPY

@loudpipez Ай бұрын

@@2418turo thx 👍

@Apk24dc5 2 жыл бұрын

When you corrected yourself as to which side is the front or the rear, how do you know? I literally have the same kit and it does not say anything.

@danny1103 Жыл бұрын

左前=Left Front; 左中=Left Mid; 左后=Left Rear；右前=Right Front; 右中=Right Mid; 右后=Right Rear. As for the running board, they are symmetrical and its orientation doesn't matter as long as you have your brackets correctly installed. I think OP just either misspoke or mis-correct himself. But I do think @7:34, he is verbally correct since it will be installed on the driver side (Left side) and the orientation of the board is correct at this second, until he flipped it over @7:57 after installing the brackets. Then you can see that the closest bracket is the longer one and therefore it is the front bracket.

@sjbdrums1969 3 ай бұрын

How beefy are the brackets? Is everything solid, no flex?

@2418turo 3 ай бұрын

Seem to be normal as the oem ones. But how durable they may be? Idk yet but so far it’s been 2 years. No issues with them

@c0mikal310 2 жыл бұрын

How long did it take to install?

@danny1103 Жыл бұрын

Professional= 1.5 hour. DIY = 2-3 hours. As long as you have the right tools: Jack/Lift, box cutter (to cut out 8 access holes), torque wrench, and 2 person. I just took my time and spaced out myself to 3 days and each day took 1 hour to do so without the use of a jack/lift. Day 1: Cutting the holes on the left side then go to work; Day 2: Cutting the holes on the right side then go to work; Day 3: Installing the running boards and adjust positions. Day 4: Wash, rinse, and ceramic coating.

@sexymila1 2 ай бұрын

Size of screws

@2418turo 2 ай бұрын

Screws or bolts? I don’t remember anyway. But I want to say 15s?

@genxtechguy Жыл бұрын

Running boards?? Why?

@2418turo Жыл бұрын

Why not

@danny1103 Жыл бұрын

Why? Because its a great addition to the vehicle; where you will see some vehicles like MB GLC/GLE or BMW X5, they have those installed as well. It is a great side step for you to wash the top of the car as well.

@Noeljupiter 4 ай бұрын

Does this help with debris from the road

@2418turo 4 ай бұрын

@Noeljupiter don’t think so. I did it mainly for looks