Today I will show you what I had to do to make my 20X12 on 33s fit my truck and what I had to trim to prevent rubbing
Пікірлер: 60
@Dule713 жыл бұрын
Thanks for all the detail, appreciated bro.... nice setup too 👌
@WyattWilliams73 жыл бұрын
Thank you!
@Yurpppp2 жыл бұрын
Yea video helped me out was going to get -24 but I figure it won’t be enough poke that I’m hoping for but after seeing yours I’ve decided to go with -44 truck looks good man thanks for the help
@WyattWilliams72 жыл бұрын
Yea my old truck I had -24 and I wanted more this time around lol
@CasterOfShame Жыл бұрын
Thanks for the video👌🏽 everything i wanted to know abt puttin wider wheels on my f150. Looks clean too
@freeshavacado39593 жыл бұрын
Truck looks really nice with your wheel/tire set up. I'm going back and forth on what kind of kit to get for my truck. I have a 2015 XLT CCSB 2WD, first truck I've ever owned. I had a 2005 Crown Vic for the previous 8 years so jumping into a truck is new to me. I want a 2.5 level up front but I keep coming back to the MaxTrac 4.5 spindle lift kit. Plus I still want my truck to fit in my garage too. And I saw the TX plates, I'm in the Dallas area if you have a shop to recommend.
@WyattWilliams73 жыл бұрын
Yea with a 2WD the spindle lift would be the easiest way to do it. A 4 inch would be what I wish I did. I had my level put on at the dealer and I did the rest myself.
@CrunchDramaNetwork10 ай бұрын
I have 20x10s -12 and can't stop it from rubbing! I cut half my crash bars off. I really didn't want to chop them all the way ofg
@isaactorres74802 жыл бұрын
Great video man ! I took off my front crash bar and that front arrow spliter thing on the bottom front and trimmed plastic and took off mud flaps ... But im rubbing on what ever that plastic part on the rear of the wheel well I ssit want to cut into it bc afraid of fucking it dramatically hahahah...im running a 2.5 leaving kit imm deal with the rubbing till I can upgrade to a 4 inch lift
@00thehunter972 жыл бұрын
How much cutting do you think I will have to do if I install 20x12 -44 offset rims with 37s on a 6.5 in lift in a f150
@WyattWilliams72 жыл бұрын
Probably a decent amount depending on the year. I’ve seen some guys run 35s with that setup and have to trim but I’m sure it can be done
@shenjiawu67222 жыл бұрын
Just want ask your headlight did you connected the fuse? Coz I got same headlight. Diffuse connect it’s really confuse me
@chrisstopher68582 жыл бұрын
I’m in the same process, just put 22” tis 554 with 33” on 2.5” level kit on my 19 f150. Debating cutting crash bar or just removing it so I can pop it back in if needed down the road.
@WyattWilliams72 жыл бұрын
Yea removing is probably the best bet but I think the bumper has to come off
@superjetnorcal3 жыл бұрын
Thanks bro what size tires do you think you could run without rubbing my trucks black so that offset would kill me lol I’m debating on going with a level or a 4 inch lift. Also do you recommend the headlights swap ?
@WyattWilliams73 жыл бұрын
A 4 inch would help a lot on my setup but 33s on positive offset wheels you’d probably be good, and I love the headlights
@rolandbegaye3 жыл бұрын
I got 33.5 on my 2019 f150. No rub at all.
@capt.crunch127611 ай бұрын
Just bought some 20x10x -12 1:04 paired with Toyo Rt Trails. 33 12.5 . I'm not adding any struts . I don't ever plan on off-roading. Any regrets going this wide?
@WyattWilliams711 ай бұрын
I love the wide look, but it will make the truck get dirty pretty easy lol
@gregsanchez88713 жыл бұрын
Think with more trimming with your wheel setup and running 35’s for tires it can work? Good detailed info 👍
@WyattWilliams73 жыл бұрын
I think I may have to cut into the fender more to get 35s to fit with this offset, but I’m sure someone’s done it lol
@jamiemendoza77513 жыл бұрын
I’ve done it and its a lot of cutting lol but looks sick 🔥🔥🔥
@alfonsovalles45772 жыл бұрын
When you put big wheels,?do you need change TPMS sensor? Thank you
@jonahadams873 жыл бұрын
How much mpg you lose? Any difference after the leveling kit installed?
@WyattWilliams73 жыл бұрын
I lost about 3 mpg
@thatWASdum3282 жыл бұрын
Very helpful thank you dude. Astonishing that these have a 44 inch offset tho that’s bananas
@jonafreitas87542 жыл бұрын
Where you buy your lights from
@R1steveoh3 жыл бұрын
Where did you get the Ford oval emblems? Are they just vinyl overlays? They match the truck very well. I have an ingot silver, too.
@WyattWilliams73 жыл бұрын
I got them from isfpcustomemblems on Instagram and yes they are stick on
@jonahharrelson94712 жыл бұрын
would i have to trim the fender trim piece that comes on the f150 sport? i wanna keep the look of the entire wheel well stuff but idc about cutting all the stuff inside. you think I could still fit 12 wides?
@WyattWilliams72 жыл бұрын
The fender flare? I’m not sure but you might be able to sneak by or trim a little at the bottom
@juliohernandez-cn3bm3 жыл бұрын
I just bought some wheels with -51 offset, so does that mean my wheels will stick out more? That poke on your wheels is good enough for me lol
@WyattWilliams73 жыл бұрын
They’ll will probably poke out a little bit more than mine. I’m not sure how noticeable it will be. I believe the number is in millimeters but don’t quote me on that
@musselmanmedia52362 жыл бұрын
damn bro you shoulda kept posting your channel was going to be big!
@WyattWilliams72 жыл бұрын
Yea I wanted to keep it going but I didn’t know what to post, I have some ideas, you may have given me some motivation lol
@musselmanmedia52362 жыл бұрын
@@WyattWilliams7 well since its a truck KZfaq page dude keep it all truck stuff. Maybe like best beginner mods or best beginner trucks or like what mods not to do or like how tos maybe
@WyattWilliams72 жыл бұрын
@@musselmanmedia5236 yea those videos have done the best for me, I’ll think of some videos to do here soon, thanks for the input!
@elimathew27393 жыл бұрын
Do you ever get rocks trapped in the lip of your wheel causing scratches on the wheel (that is the one thing I am worried about before I buy new wheels because I drive on gravel every day)
@WyattWilliams73 жыл бұрын
Not that I’ve noticed before. It’s mostly just dust and dirt that get on the lip, and the only time mud has gotten stuck in them is when I actually kinda buried it. Just make sure you don’t have stretched tires and you should be alright
@grantstevens36312 жыл бұрын
This is why u don’t buy used lifted trucks lol. Messy as hell
@WyattWilliams72 жыл бұрын
I’ve thought about buying a new truck because of what I’ve learned lol definitely would do things differently
@georgehonse56942 жыл бұрын
What offset are your wheels?
@WyattWilliams72 жыл бұрын
-24 I think
@WyattWilliams72 жыл бұрын
Actually -44 now that I think about it lol
@jaydenkiddy77962 жыл бұрын
Bro we literally have the same lights and tails and I’m putting 24x12 on a 2.5 level with 33s on 😭
@WyattWilliams72 жыл бұрын
Hell yea, should be a clean truck!
@raccoonhuntersc19943 жыл бұрын
What brand is the 2.5 level
@WyattWilliams73 жыл бұрын
I forget. Dealer install, but it’s just a puck level
@spaceghost5.03 жыл бұрын
Brand doesn't matter on a leveling kit it's just a spacer I got mine on ebay or Amazon for like 40$
@thecataclysmitician46617 ай бұрын
Perfect example of what NOT TO DO! Not only does it look like raw shit, it's unsafe... Just get the right lift kit and do it RIGHT the first time instead of being an moron!
@lamboman33793 жыл бұрын
Wondering if I put a 3 inch level would they still rub as bad
@WyattWilliams73 жыл бұрын
It would help for sure but I think a 4 inch would be ideal for less rubbing but then it starts to get kinda tall for 33s
@WyattWilliams73 жыл бұрын
The trimming would probably be able to be done cleaner on the rear with a little more night
@m0neyz1ngh3 жыл бұрын
Can you make a video showing more of the cuts you made on the back side of the wheel wells (the white box)?
@WyattWilliams73 жыл бұрын
I’ll try to get some more clips of that soon
@Coyotemike3023 жыл бұрын
Good video brother. I had to do the same trimming to mine as well. Click my pic to see my trim job some time. Keep the videos coming.👍
@WyattWilliams73 жыл бұрын
Awesome, I’ll check yours out!
@kineticenergy10852 жыл бұрын
I had to stop watching half way through. To each their own and I’m glad you love what you did, but hell no am I chopping the hell out of my truck, compromising the safety and structure, just to put bigger tires on it. 🤦🏽♂️
@WyattWilliams72 жыл бұрын
Yea if I did it again I would’ve gone with a bigger lift, but that’s why I made the video because I’ve had a lot of questions on how to make this set up work