I did 17x9s (18 offset) with 35s on my 2019 F150 and all I had to do was stretch apart my crash bars and trim my mud flaps

Dylan's truck looks so good 🔥

The intro won me over! 😂

I am going to pull up with my 2 inch leveled ram 2500 and want you to put 40s and 16 wides on it. I will test your theory of making anything fit

Can we get more videos of this chaoticness had me on my toes the entire time 😂

What was the offset on those wheels? Looks great! I have 35/13.5r24 -51 offset with a 6" lift on my 150. Not too much rub but I think I want less offset, width, and rim but more tire, any recommendations? I was thinking 20r 35 wheel? Or is that too small for the lift?

For a Ford, looks pretty good I do some more mods to it though for sure

I really wanted to trash it, but it honestly looks pretty good. My 2000 Expedition fits 34s (305/70/17) with no mods or cuts at all. No rubbing either. I just put them on. 35s (315/65/17) fit with a little rub. 33s (285/75/16) look small on it. All stock wheels. Obviously, my speedo and acceleration are slow. Guess they don't make them like they used to.

I don't understand , I have a 2018 with only a level 2.25 in the front. Only cut my front crash bars. Never rubs anywhere. No cutting at all.

Out of all the trucks I've owned I only had one f150. At the time I wasn't into truck mods, I mainly used it for getting parts for my cars and transporting my motorcycle. Never did any mods on it. I really didn't start mods until I got my first f250 super duty. I was in the store and saw a magazine called Lifted, It had a lifted tricked out f250 on the cover. It was then I went all out with truck mods, just like I did with my cars and motorcycles. Wheels, tires, bumpers, suspension, horsepower and interior upgrades. Interesting video though, I really enjoyed it.

3 inch lift is lifted, not just leveled

So if y’all were able to fit 22x12 35” then a shop should be able to fit 24x12 35” -44 on a 3.5” ready lift?? on a 2016 f150 4x4

I had 12 wides and 35’s on a 2.5” level f 150…. It was definitely some work to make that fit with no rubbing

Good stuff. I've now see a few of your vids, and all are informative, useful. Thanks. Am hoping you can answer a few questions. I'm new to all these but thanks to KZfaq am learning a lot. I am going back and forth between getting a full size suv like a gmc yukon at4 or denali, or an f150 platinum or raptor, leaning to the f150's. I'd like to level the f150 or lift the suv, say 2-3"s, and add bigger tires. Love the 35's, at least on the f150's, though the 37's on the raptor if i go that route would be awesome. In any case, I see f150's leveled with 2", 2.5" and 3", so which actually levels an f150, and if it's the 2", and you do a 3" level, does that mean you add a 1" lift in the rear, or are you left with it dancing around level but not being exactly level depending on which number of inches you get? And two, the yukons and tahoes and escalades have adjustable air suspension and magna ride. How will a lift on such an suv affect those, affect the air ride? If normal minimal road clearance is 8", and in 4H you can go to 9" and 4L to 10", if you add a 2" lift, does that also raise the air ride, so that normal road clearance becomes 10", 4H can go to 11" and 4L to 12", or if not, does the lift screw up the effectiveness of the air ride? Or is there something to be done to raise the air ride also, and does that cause problems? Thanks. I'm not sure who to ask or where to go to learn about this air ride question.

Complete job of fitting those wheels, what a ballpark figure on the price?

Where did you get thoes led fog lights from

Will 24x12 with 35s work as well?

did any of y’all have to use .25” spacers to clear the uca?

What’s is that almost honey combed material on the back of the fender at the fire wall y’all had to cut? I’ve gotta do the same thing but didn’t know what the hell it was 😂

I really think these manufacturers fail when it comes to making wheel openings and all that goes with that large enough to at least fit 35s.

If you do 285 width 35s on factory offset wheels, you may not have to trim anything. I’m running an 11 f150 with a 2” level, 285-75r18 tires on newer factory wheels. Only had to remove the mudflaps, but it also doesn’t have the crash bars.

I did 37's with only a level on my F250.

What was offset on wheels. I’m thinking about a +19

Thought my 35s on 20x9s was a challenge. Proves anything is possible with enough work

I have a 6" lift on my 18. Running 35x12.50r20 now but do you think I can get away with running 37's?

more stuff like this

More of these type of videos please! Also what exhaust setup is that? Hass to be 3.5.

Can I get those wheels in gloss black?

Do the rims make a difference because I've got 35s on my 2020 f150 with factory rims and it's just leveled and have no rubbing

_The guy at the beginning caught me off guard 😂😭_

What tires are those? And how noisy are they on the highway?

Pretty sure getting rid of those crash bars eliminates the 5 star front crash rating.

Looks better than a 6 honestly

How does he like the Halo lift aluma struts?

Like these of videos!

Do the 4th gen rams have more space in the wheel wells than this f150?

my first truck was a '05 f150 with only a leveling kit and i had 35"x17"x12.5" ,rubbed liked a bitch

Finally a token Black Guy 💪🏿🤦🏿‍♂️

Any idea the turn radius on the dash before they rub?

Guess this answers my question will 35s fit on a 3” lift 😂 on my 2020 ram

YUHHHHH FIXIN SOME SHIT

********* Is that Jr's Bronco...with Poison Spyder beadlocks??? 😮😳🤔

Where’s the lift?? 😢

Where are yall located?

Exhaust?

We need more tire and less wheel

portapower to the crash bars, problem solved. no cutting needed and they remain.

Why is the intro so aggressive??? I fucking like it

1500 level and 37s??????

Y’all did way to much taking the whole frond end apart just to do some trimming 😭

Day 121 of asking custom offsets for a company dually truck build

Day 158 of asking co for black and milled davincis

All the money he spent on labor… could’ve just got the 6” lift kit….🤷🏻‍♂️

Take that air dam off

1st