If you want trailer brake gain control,and have a 2020 f150. Watch this video.
Пікірлер: 59
@ruvrandomusefulvideos2 жыл бұрын
Great info regarding that fuse. I just bought one for my 2020 Lariat and it comes with the 30 amps fuse and after watching your video, I check the fuse box and its has the 30 amps already so I have spare.
@gostlrs3 жыл бұрын
Thanks for the video - made the install a breeze when i went to get it programmed - he said the other years were done differently!
@michaelg28672 жыл бұрын
Great video for my 2020 XLT, thank you! I actually found on my truck in the IPC configuration that trailer brake control module has trailer brake gain under it where yours does not. If i just enabled both of those It actually changes your next step of E401 to E441 automatically. My trailer brake controller was also powered unlike yours so perhaps could explain the difference. Either way your the man, thanks again.
@calawaydp2 жыл бұрын
Hell ya man!
@mickdouglas30623 жыл бұрын
Thanks for the video. Worked for my 2020 XL.
@erich36014 жыл бұрын
Thanks for the tip! It worked on my 2020 F150 XLT.
@calawaydp4 жыл бұрын
Yes sir! Glad to help!
@rlj1513 жыл бұрын
Thanks. I just bought a 2020 F-150 XLT and ordered the trailer brake controller. Was wondering what I had to do to actually install it. Thanks!
@gilolcott82833 жыл бұрын
Thank you worked great for me very helpful
@calawaydp3 жыл бұрын
Sweet!
@williambrown238 Жыл бұрын
Well I got mine to work properly on my 2020 thanks
@calawaydp Жыл бұрын
Hell ya man!
@BlueMooseTraveler3 жыл бұрын
This is awesome, I am about to swap in the full center console and have to take this apart anyways... whats another mod? What is the software you are using? I want to swap some electric seats in too.. do think I would have to change setting like that too? Very cool.
@MrHayden202 Жыл бұрын
Thank you!
@calawaydp Жыл бұрын
Absolutely
@jetboy7703713 жыл бұрын
Hey great info. I am now looking at a new 2020 F-150 XLT that is missing the brake controller. I would really like it to tow a trailer and be safe. So this install is no really big deal and can be accomplished at a reasonable price afterwards ? If so I'll get back with the dealer and talk, there are very few 2020's on the lots with the options. I could do the switch install but would need someone with a scan/programmer tool to talk to the truck computer.
@calawaydp3 жыл бұрын
Ya, it's an easy process
@URimagefl3 жыл бұрын
When you programed the TBC, did it activate the 12 volt aux in the connector. For some reason we still have no voltage at the pin and need it to charge the trailer batteries
@calawaydp3 жыл бұрын
My truck already had the fuse in the fuse box on that circuit
@geoffreytaylor98353 жыл бұрын
I can answer this as I just bought a 2020 Lariat and my enclosed trailer wasn't getting lights. For the 2020, the process is convoluted due to the "Smart Trailer Connector." Back up to your trailer, shut the truck off. Hook up your 7way plug, then turn on whatever 12v accessory you need- in my case I had to turn the switch for my lights on- the truck needs to detect a draw to activate the trailer charge circuit. Go back to truck and get in and shut the door (important). Then turn on ignition (do NOT start truck) and hold brake down for 3 seconds. Then turn ignition on and again hold down the brake for 3 seconds. Your trailer charge circuit (12v power out) will now be activated. If you happen to leave the truck with the fob in your pocket and get the 2 beeps? Start at step one again. Yes, I know it's crazy. It appears many people rewire this specific circuit due to this absolutely stupid system.
@harrypreston74563 жыл бұрын
If I install an after market 3rd party controller, using the original plug, would I still have to program the truck and would the controller still show up on my truck display?
@calawaydp3 жыл бұрын
Not sure bud. I would think so
@adamwilliams51012 жыл бұрын
What version of Forscan are you using? I have v2.3.43 with extended license but only getting a very small amount of options of modules to configure. Doesn't even have the IPC listed. Anybody struck this before? 2020 model.
@brandonc2233 Жыл бұрын
Same problem I'm having disappointed might have to have dealer do it after I bought thr elm scan tool too. 15 bucks but still!
@britteasterling49803 жыл бұрын
Great video! Where did you get the black trim pieces to replace the grey ones? They look great!
@calawaydp3 жыл бұрын
Oem pieces I had professionally painted black
@joshhaney97693 жыл бұрын
@@calawaydp I was wondering this too. They look great
@brucekocher59213 жыл бұрын
I just had the dealership install a break controller. When I squeeze the controller the breaks work and the screen lights up. When I use the foot break the the screen does not light up. The dealership said it won't? Did yours light up with the foot break? Thanks in advance.
@calawaydp3 жыл бұрын
It will while looking at trailer info in cluster
@mateocarlos26744 ай бұрын
I have a weird issue. I bought an "OEM" controller off Ebay. Everything works now EXCEPT when I plug a trailer in, the trailer brakes are full "ON". to the point where the trailer axle is locked even without pressing the truck brakes. I have used two different trailers with the same result. And this is with the truck set to zero, and the gain set to zero. So, I'm down to replacing the controller, OR making some Forscan setting adjustment. Your info about changing the 0 to a 4 is pretty obscure information. Could you link me to where you discovered this odd bit of information? I would appreciate it very much. TIA
@calawaydp4 ай бұрын
The forscan code change can be found on forscan spreadsheets. Just google them and you'll easily find the info out there. Do you have a 7 pin connection on your truck? I'd get a multimeter and measure the brake signal coming from the truck, seems like your getting voltage output when you shouldn't.
@voortman463 жыл бұрын
So if there is nothing there to except the fuse then the truck is not capable of excepting the factory brake switch?
@calawaydp3 жыл бұрын
you'll have to add some extra components yes
@madviking13203 жыл бұрын
Some trucks are just missing the fuse. If you don't have a fuse in that spot, you need to check the sockets and make sure the metal receivers for the fuse are there. If so, just put the proper 30amp fuse in place. If not, it may be possible but will be much harder.
@steveschnepp42983 жыл бұрын
Great video, I got everything done, truck picks up the brake controller, but the truck doesn't recognize the trailer. Any suggestions? I had a older F150 with the OEM controller and it worked, so I know its not the trailer. All fuses are in place
@calawaydp3 жыл бұрын
Not sure
@nikkiforzetting96983 жыл бұрын
Hi, we are having the same problem. Did you determine what was wrong or what had to be done for the truck to recognize the trailer?
@jeremypertuit30812 жыл бұрын
@@nikkiforzetting9698 Did you ever figure out this problem
@mateocarlos26744 ай бұрын
Same problem, anybody solve this yet?
@survivethat20123 жыл бұрын
Did you already have the 7 way plug on your truck? My XLT only has the 4 plug.
@calawaydp3 жыл бұрын
Yes
@mattsuhoversnik55173 жыл бұрын
Did you install a 300$ factory controller, or 70$ one from Amazon? Do you have an option either way?
@calawaydp3 жыл бұрын
Bought a used oem one off ebay
@joshhaney97693 жыл бұрын
Fairway Ford on Ebay has it for $145
@lukedeitz19993 жыл бұрын
What ELM327 USB to OBD adapter did you use?
@calawaydp3 жыл бұрын
Some cheap Amazon 1
@kody71533 жыл бұрын
Does the truck have to come with a stock 7 pin plug?
@calawaydp3 жыл бұрын
Yes
@schirtzy13 жыл бұрын
how did you learn to change the o to a 4 ?
@calawaydp3 жыл бұрын
Research
@1970351C2V3 жыл бұрын
Did you have to pop the center console up? Thanks.
@calawaydp3 жыл бұрын
No sir
@1970351C2V3 жыл бұрын
@@calawaydp Thanks I was curious watching some of the other install videos. Seemed like they were going way overboard with panel removal.
@SlopChap3 жыл бұрын
Did you have a trailer plugged in while filming? I'm asking because I don't and my display said "Trailer Disconnected" Great video, I'm guessing that everything was done right or i wouldn't get the "Trailer Disconnected" banner on my display.
@calawaydp3 жыл бұрын
Yes, you have to have something plugged in to double check it works
@SlopChap3 жыл бұрын
@@calawaydp Got it, thanks for the quick response!