Excellent! Thank you!

Thanks!

Had it for about a year now, still going well.

Thanks! 👍

Mine wasn't missing any pieces and the bed had threaded holes where things needed to go. *Ideally* it's just plug and play.

Mine were missing. May have to get that nutcert tool.

Had the same issue - 21's don't seem to have threads at the front of the bulkhead.

Any jt built after 7/20 will have no threaded holes

@@rainmanx9114 My 2021 Gladiator (built 9-20) DOES have threaded holes: Some in the front of the bed on the top part (where Jeep's OEM Trail Rails attach) and the top sides of the bed in the front and rear. IIRC, they're mostly (if not all) 6mmx1.0 (aka: 6M) sized hex-bolts. I used them to mount the 4 Undercover Ultra Flex bed-cover/rail brackets to so I could mount the rails to the brackets, and all 4 brackets DO use holes at are there and already-threaded for their 6M bolts. [The 2 front brackets use the only threaded hole there and a tab on the bracket goes into an unthreaded hole, and the 2 rear brackets use the 2 threaded holes there] Yes, there ALSO are "just holes" near the threaded ones with no threads, but I'm just saying there also ARE holes that are threaded in the Gladiator's bed and they're sued for mounting rails. -- BR

The top material has held up well through the first New England winter. No signs of fading at the moment I'm curious to see if the latch mechanism is reacting with the metal bar it clamps onto though. I'm not sure if it's just a mineral build up from moisture or not. I haven't tried to clean it yet. The top also seals well and I haven't had any issues with water getting in. The material has stretched a tiny bit and will create puddles of water on the cover. In the winter this can turn into sheets of ice that are more difficult to remove. Overall, I like it so far. I'm curious as to how the aftermarket third party options are holding up. I like this one over the hard cover because I can still see out the rear window vs the trip fold model with it folded up.

@@ThatTimGuy Thank you 🍻

17-3/4" deep and there are 4 factory tie down rings in the corners of the bed.

@@ThatTimGuy My bad, I meant the depth as to mean how long is the bed?

@@petervachon6989 5'

I had to get a truck to help get games 😳😁

Great question! The product I use is called RaggTopp - wolfsteins.com/

Good question. I don't know the weight off the top of my head. It's not super heavy. As far as gas mileage goes, I drive pretty conservatively and average about 21-24mpg. The cover has been on pretty early on into ownership of the truck. So I can't comment on if it's a gain or loss, but if you go back to the old Mythbusters episode about trucks and mpg, I think bed covers made it slightly worse.

@@ThatTimGuy Thank you

You are right about the latch! I didn't realize that when I installed it. What straps are you talking about? The ones that keep it rolled up? There is velco on the straps that keep it rolled up.

They have 3 different options soft roll up is 595 then soft tri fold one is 625 then hard tri fold one is 995

Keeps things pretty dry. The truck stays outside through snow and rain. Any water that has come in so far was when I opened the tailgate.