2020 Jeep Wrangler JL Trailer Wiring Harness Installation

No video

2020 Jeep Wrangler JL Trailer Wiring Harness Installation

Рет қаралды 49,628

U-Haul Trailer Hitches And Towing

Күн бұрын

Пікірлер: 31

@hotrod76. 2 жыл бұрын

It's a shame we buy a jeep for 50 grand and it's not wired for trailer lights.!!!

@AStanton1966 9 ай бұрын

I agree, especially when you are buying the top trim level Rubicon for $55,000 plus! It should be noted however, when you buy the trailering option from Jeep, you get added aux. switches for future lighting accessories and a bigger charging system.

@Michael_00001 3 жыл бұрын

I just installed this on my 2020 Rubicon Unlimited. Super easy. I have the LED taillights on my Rubicon and it works fine. Instead of running the black power wire all the way up to the battery I just spliced it into the 12 volt outlet in the back. Easy peasy!

@nathanmyers638 3 жыл бұрын

Did you have to do a exit reflash. Wanted the harness from mopar because of the double plugs. Dealer say a reflash has to be done to add any plug and play harness due to extra current being pulled on any model other than a sport s. If it was in stalled from the factory it’s already reflashed.

@nathanmyers638 3 жыл бұрын

Apparently with out the reflash it burns out the navigation system due to the pitch and roll sensing. I’m trying to find all info I can to keep them from robbing me of $800+.

@Michael_00001 3 жыл бұрын

@@nathanmyers638 Interested to know where you are hearing that from. I didn't reflash anything and just towed my boat today without issues.

@danielfunk5772 Жыл бұрын

Why does it need a power wire..? And hooking up trailers for many many years I’ve never had to run a power wire unless it had auxiliary plug or electric brakes this kit has neither

@trailerhitches Жыл бұрын

@@danielfunk5772 Daniel, the power wire is necessary when your vehicle has LED tail lights as they do not have enough power to activate the trailer light wiring harness.

@Hpdonaway45 3 жыл бұрын

May be a dumb question, but what did you end up mounting the converter to? I never saw that in the video.

@DBZanimelover23 4 жыл бұрын

You don’t need to route it there to the if you have a 12v outlet in the trunk. It’s just a waste of time and energy. All you need it’s to tap into the wire with a scotch lock and you’re set

@mikecourtock298 4 жыл бұрын

How did you use the 12v outlet and what would I use to do that to tap int that?

@AStanton1966 9 ай бұрын

Those scotch locks are terrible. I'm currently on my 2nd scotch lock for some aux. backup lights I installed on my Silverado. Soldering is always the best way to go if possible.

@DBZanimelover23 9 ай бұрын

@@mikecourtock298 so you find the wire that supplies the power to the plug, test the wire of course with a probe light

@aracelyq6189 3 жыл бұрын

I had this done at A U-Haul on my 2020 Jeep Wrangler Sahara and after they were done I noticed my rear camera was no longer working and I couldn’t control my AC temperature with the buttons or touchscreen anymore. Did this happen to anyone? U-Haul couldn’t figure it out so now I’m waiting for the Chrysler dealership to check it out.

@neilhaxby9197 Ай бұрын

Why do I need a butane torch

@trailerhitches Ай бұрын

To melt the plastic housing of the heat shrink butt connecter. As seen @3:00 of the video.

@lynnbeck5903 4 жыл бұрын

Why does the Jeep JL need a wire to the battery?

@tonybortko585 3 жыл бұрын

to provide power if the trailer has electric brakes.....

@andrewgrajeda3349 2 жыл бұрын

I think it's actually just in case the trailer lights work differently and need more power/pull differently somehow

@phediasdemou6824 3 жыл бұрын

Is the process the same for EU Jeep Wrangler?

@ryderwayland 4 ай бұрын

How do you charge to install that?

@trailerhitches 4 ай бұрын

Please feel free to check our website - www.uhaulhitches.com. This will give you the lcoal install price and details.

@brandonenglish6557 2 жыл бұрын

Yea, just a power wire, no need for flex loom or anything. Remember, this is a Jeep, it’s gotta be able to go off road. This guy is not a pro. Just tuck it in… no problem.

@liamcoleman8244 4 жыл бұрын

I thought it was much harder, why the heck would i pay the mopar dealer $1000 to do this

@DilettanteDon 3 жыл бұрын

kits is senselessly way more complicated required panel removal. This is a smarter design.

@mart14k Жыл бұрын

Im literally stopping in the middle of this job to comment on how horrible this video is. Literally skips over where you route like half these wires. Doesn’t explain where to put the box… awful