Hey AZ, Glad it was helpful! Thanks for stopping by the channel to check out the video. It’s appreciated. Take Care and think Snow ❄️

Hey Louis, Thanks for stopping by the channel. 👍🏼 You are correct, you don’t have to take everything apart. I had mine apart because I was doing additional wiring by adding a GPS conversion plug and USB plug inside the glove box so I needed everything apart for it. I was showing where to grab the power front he factory Accessory plug. I guess I should have better explained myself. Did you make a video of installing yours? That would have been great for others to see how you did yours? Take Care

Hey Steven, Thanks for stopping by the channel.. Take Care 🤙🏼

Thanks Geoff, and thank you for stopping by the channel to check it out. I’m glad you got something out of the video. Take Care 🤙🏼

Hey J, Thank you for stopping in to check out the video. 👍🏼 Take Care

Hey René, Thanks for stopping to check out the video and thanks for the kind words. It's appreciated. Take Care and THINK SNOW ❄❄

Hey Michael, Hope you had a great Holiday. Thanks for stopping by the channel. I'm glad you got something out of the video and it helped in some way.. 👍🏼 Take Care !

Hey jpaul, Thank you for watching the video. Great to hear the video helped. Just reach up under the console and hold the bottom part with one hand where the wires are and use the other to twist the cap and it should tighten right up. I’ve had to retighten mine a time or two so it’s not uncommon. Take Care 👍🏼

Can you tighten without removing the hood to reach under console? can you just tighten from the top side?

@@jpaul4595 Yeah should be able to just tighten the cap without holding the bottom just make sure the plug itself doesn’t spin a lot when tightening the cap. You don't want to twist up the wiring to much.. 👍🏼

@@SometimeIsNow good point, I’ll hold the plug and twist cap to avoid twisting wires. Thanks so much for your help. Have you been out to Tug yet this season?

@@jpaul4595 👍🏼 No, I haven’t been riding at all this season. I’ve been pretty busy. How about you? You get any riding in yet?

Hey CatmanDoo, Thanks for the kind words and for stopping by and checking out the videos. Yeah that happens sometimes. If you have a connector that unplugs quite hard it tends to loosen up the plug after awhile. I know my male plug on the oxygen helmets go in and out quite hard.. Take Care 🤙🏼

Sounds like you received a bad visor plug kit from the start. I’ve had no issues and it’s been working great so far. Fingers crossed. 🤞🏼

Thanks John, and thanks for stopping by the he channel. I bought the Extreme lift from Up North Sports but looks like they’re currently out of stock. Here’s the link: www.upnorthsports.com/snowmobile/snowmobile-equipment/shop-tools-and-equipment/extreme-max-5800.1184-deluxe-aluminum-snowmobile-lift-wheel-kit-included.html Take Care and think snow❄️ 🤙🏼

Welcome to the channel 1grmaximus, I know. You would think the top Skidoo would come with the heated plug. Well.. At least for 2022 the skidoo’s come with Linq brackets.. They’re getting there. Lol Take Care

Should come with all sleds considering how much they go for..

@@mxr248 Hey MXR24 Thanks for stopping to the channel. I agree, It’s like buying a vehicle that doesn’t come with a defroster for the windshield. 🤷🏼‍♂️ I would think its a safety feature so you can see clearly. Take Care and Think Snow❄️❄️

@@SometimeIsNow oh I’m doing more than thinking snow I’m praying for it. I live in northern Illinois and we need it.

Hey…YW Ricardo, Thank you for stopping by the channel. I’m glad you got something out of the video. 👍🏼 Take Care

Your welcome. I hope this video helped you out somehow.. That’s for the support !👍🏼

Hey Paiste.. Make sure you keep your Garmin Montana for the new sled. I recorded video when I converted my G4 wiring from the XS chassis so don’t get rid of that GPS. Use it on your new sled. The XS chassis uses different plugs compared to the new G4 wire plugs but Gripnrip make a conversion plug that makes it easy peasy. I’ll help you if you need help. I’ll get that video ready if your interested in something like that? Let me know. Take Care. 🤙🏼

@@SometimeIsNow You should post that video either way. That's good instruction that people probably want. If you get the 7.8-inch full-color display it has a GPS when connected to your phone using the BRP app. So if I happened to order that then I wouldn't need my Garmin anymore.

@@Paisteboy Ahhhh yes..true.. Your correct, the new 7.8 inch screen has it. So I guess your not going to need the ole Montana on that new sled 😉 You should install it on Zuke’s new sled so he doesn’t get lost anymore like when he rode with Shag.. LOL 😂 Take care buddy.

Hey Slowbee !! You been riding?? I know it.. I can remember the days when you just unhooked two rubber latches and the hood was on hinges.. That’s when you could actually see the motor to work on it. LOL 😬🥴

@@SometimeIsNow this past weekend we did a trail side hotdog roast! Thought I might see you! I'm hoping to get a few miles this week! Have a trip to ADK's for the weekend (non snowmobile) trip!

@@SlowBee One of these days I need to get up your way and ride with you.. Did your buddy ride that new 900 yet??

Hey Michael, Thanks for stopping by to check out the video. Yes.. Grip-N-Rip offers two different splitters. One for a single accessory and one for two accessories. I purchased and installed the 2 accessories splitter and powered my dual port USB charger in the glove box and my GPS. Here's the links to both splitters: Single splitter: www.gripnripracing.com/index.php?id_product=234&controller=product Two accessories splitter: www.gripnripracing.com/index.php?id_product=228&controller=product Take Care 👍🏼

Hey Manolo, Thanks for stopping by the channel to check out the video. It’s appreciated. Take Care 🤙🏼 and think snow❄

Hey Gianluca, Thanks for stopping by the channel. All I can think of is a plug got bumped and unhooked or you forget to plug something back in when you reinstalled the hood? That happened to me once. I unplugged a sensor and forgot to plug it back in and the check engine light came on when I fired it up. Just doublecheck everything’s plugged in. 🤙🏼 Take Care.

Hey Jesse, Thanks for stopping by the the channel. To be honest I’m not 100% sure on any of the mountain sleds. There’s not many of those around here and I’ve never worked on one or seen one close up, only in videos. Take Care 🤙🏼

@@SometimeIsNow thanks for the response! can't seem to get one from any other channels! keep up the great content and good work!

@@jessejames1590 No Problem Jesse.. Thanks again for stopping by and watching the videos. Take care.

Hey Mike, Thanks for stopping back👍🏼 Glad the video helped. It’s not working on the Bad Boy or the ‘18? Take Care

It’s not working on the bad boy the guy who owned it before put a wire from the battery and I don’t like it I want to use it from the dash

Nice video very detailed awesome gonna work on it this weekend

Hey Bgoozemm, Thanks for stopping by to check out the video. Part# is listed in the description but here you go 👍🏼 Ski-Doo Part# 860201283 Heated Visor Plug Kit for REV Gen4 Take Care 🤙🏼

Hey David, Thanks for stopping by the channel. I totally agree. Heated shield plugs are so common now. But… then Skidoo wouldn’t make their billions off all their accessories. 🥴