2021 Acura TLX A-Spec - Brand New OEM Type-S Brembo Brakes Upgrade Kit and Installation (Episode 7)

Рет қаралды 45,784

2 жыл бұрын

In this episode of this series, we will be installing the factory Oem Brembo 4-piston calipers upgrade kit. A complete bolt-on kit for your 2.0 Turbo TLX. For purchase inquiry, shoot us an email: AcuraHondaClassic.gmail.com
Special Tool:
DIY Brake Bleeder with Magnet- amzn.to/2ZIRazl
Slide Hammer (Bearing): amzn.to/31XQozK
Brake Caliper Hook Hanger: amzn.to/3dUWNhE
Milwaukee 3/8 Impact Wrench M18 - amzn.to/3ugHcAa
Milwaukee 3/8 Variable Ratchet M12 - amzn.to/3kMRlSm
Milwaukee Magnetic Flood Light - amzn.to/3icv5PP
Milwaukee 1/4 screwdriver M12 - amzn.to/39KuDUx
For Acura Honda Classic Apparels and Merchandises:
acurahondaclassic.com/
Part Numbers:
Driver Brembo Caliper: 45019-TGZ-A01
Passenger Brembo Caliper: 45018-TGZ-A01
Front Brembo Brake Pads: 45022-TGZ-A01
Driver Brake Shield: 45256-TGZ-A01
Passenger Brake Shield: 45255-TGZ-A01
Front Brake Rotors (2): 45251-TGZ-A01
Driver Brake Pipe: 46336-TGZ-A01
Passenger Brake Pipe: 46335-TGZ-A01
Brake Hoses (2): 01464-TGZ-A00
Driver Brake Bracket: 42513-TGZ-A00
Passenger Brake Bracket: 42512-TGZ-A00
Filming Gears:
Go Pro 9 - amzn.to/3CKUuYO
GoPro Media Mod - amzn.to/3oc0SnT
GoPro Light Mod - amzn.to/3i77MXR
Canon M50 - amzn.to/3CN2I2L
Canon EOS M Mount Adaptor - amzn.to/2XW7xIp
Canon EF 50mm - amzn.to/2XW7497
Canon EF-M 22mm - amzn.to/3CPN9XV
Canon EF-M 11-22mm - amzn.to/3m1Dx5Q
As always, tips and tricks come standard on every episode.
🔔 Subscribe for more free KZfaq "Tips and Tricks": / @ahcgarage
If you have already, please follow us on Instagram to see sneak peaks ahead of time!
Thank you to our exclusive sponsor: Acura of Pembroke Pines
www.acuraofpembrokepines.com
Follow us on
Instagram: @AcuraHondaClassic
Facebook: Acura Honda Classic
Acura Honda Classic established in 2018, is a group of Acura/Honda enthusiasts set out to bring together the car community through Acura/Honda vehicles of the 80s, 90s and today. We strive hard everyday to "Building Our Community". Follow us on IG @AcuraHondaClassic to stay up to date on our news, events and activities.

Пікірлер: 240

@ahcgarage 2 жыл бұрын

For AHC Garage Apparels and Merchandises: acurahondaclassic.com

@artisticbeats1016 Ай бұрын

my oem brakes warped 2 weeks in so i just rode them to the rotor and ordered my type a brake kit to instal on my aspec thank y ouuu guys

@georgele872 2 жыл бұрын

Awesome work Mike and John, love the video guys please keep pumping out video like these... thanks

@ahcgarage 2 жыл бұрын

Thanks for the support

@wood11b 2 жыл бұрын

This ASpec came out quite nice. Makes me want to drop my Type S off to you guys to get it right !

@mahp3039 2 жыл бұрын

I have that same Snap On impact driver for rotors except I have all the new ingersollrand 3/4 and 1/2 impact guns. Milwaukee is my other go to. I was a tech for Honda for 5 years before I started tig and mig welding. I love this new TLX. You fellas got the info for upgrades thanks guys.

@ahcgarage 2 жыл бұрын

Thanks for the support. Snap On and Milwaukee are the our choices right now

@JohnWD40TC02 2 жыл бұрын

Those new callipers and rotors look so much better than the old ones plus with the better braking it's a good job done guys, oh and that Apex Blue is such an amazing colour 🤩👏👍

@ahcgarage 2 жыл бұрын

Thanks a ton John

@mathieucossette9019 2 жыл бұрын

I know each episode Will be top notch!

@ahcgarage 2 жыл бұрын

Thank you!!

@rogerserafin 2 жыл бұрын

Mike, John, and the entire AHC Garage team making dialed in set ups for us. Thanks ya guys.

@ahcgarage 2 жыл бұрын

Much much appreciate it

@Splitrip2023 4 ай бұрын

If you rotate the rotor 180 degrees from where you had it the rotor set screws line up and you can put them back in. There is only one orientation that they will line up. I put them both back in when I did the type s brake upgrade on my TLX.

@GS-sm3jo 2 жыл бұрын

TLX is looking very sharp.🇺🇸😎

@ahcgarage 2 жыл бұрын

Thanks, cheers!!!

@louistorres3187 2 жыл бұрын

Those cars sound so good 👍 Acura dose it again

@louistorres3187 2 жыл бұрын

Oh shit lol 😆

@Mnorbert25 2 жыл бұрын

Splendid as always big thumbs up 👍

@ahcgarage 2 жыл бұрын

Thanks a lot 🙌🏼

@hondaaccord1971 Жыл бұрын

You guys are the best this is the best channel ever

@ahcgarage Жыл бұрын

Thank you!!

@rocky_top_deluxe 2 жыл бұрын

Awesome work guys 🙌

@ahcgarage 2 жыл бұрын

Thank you 🙌

@Gnicola78 2 жыл бұрын

This looks Wonderful. Thank you @ACH Garage. Any Idea if these Brembo Calibers, Rooters, Back Plate would fit 2018 Acura RLX Base?

@ErwinSchrodinger64 2 жыл бұрын

Acura should consider this as an upgrade on the TLX. With a car that massive in both size and weight, better braking is always a plus and reduced brake fade.

@ahcgarage 2 жыл бұрын

The stock brakes are more than adequate for the stock car but it’s always good to have a Brembo upgrade

@JasonLee-xg5ki 2 жыл бұрын

not many people are going to track their TLX's and the ones that do would get better results from a pad upgrade.

@jngtruong 2 жыл бұрын

Hey Mike, great tutorial video and always enjoyed your Saturday uploads. Just curious, is it appropriate to remove the wheel hub and reinstall? I ask because i have a wheel stud that is damaged and the only way i see it properly done is to remove the hub to insert a new wheel stud. Thanks

@Veryrarevryan 2 жыл бұрын

Very nice might have to cash in on a A Spec , because Type S mark ups are crazy right now

@ahcgarage 2 жыл бұрын

Right on!!

@520_jaaqc 2 жыл бұрын

Can you make a video list of upgrades because I can barely find any for my 2018 aspec

@ajsti2484 2 жыл бұрын

Great upgrade OEM++

@ahcgarage 2 жыл бұрын

Yes!!!

@QkSilver04GTO Жыл бұрын

Great upgrade! I put Brembos on my 2004 GTO and my God, what a night and day difference. My buddy wants me to put these on his A Spec. Like a couple others, also wondering about the hub reassembly… did you draw it back on with the axle nut? This question seems to be asked but not answered.

@mohdhafizi4425 2 жыл бұрын

Nice, thanks for sharing this... Superb 👍

@ahcgarage 2 жыл бұрын

Thanks for watching

@dalesacuratlx6517 Жыл бұрын

Great video and a great channel too👍

@ahcgarage Жыл бұрын

Thank you very much!

@marlonzepeda2721 2 жыл бұрын

Will this brake upgrade work on my 2020 mdx Aspec?

@thetangster 2 жыл бұрын

I wonder if this would fit 4th gen Acura TL

@exteko Жыл бұрын

When reinstalling the hub, did you just tighten the axle nut down to pull it back in?

@cesarknowsbest4425 2 жыл бұрын

Awesome guys!!!

@plorwax Жыл бұрын

Man I really want to know if this can fit a 2019 mdx a spec.

@cj7283 Жыл бұрын

Did the inner race come out of the bearing when you slide hammer off the hub?

@chrismic4835 Жыл бұрын

Hey I was wondering if these would also fit the 4G TL, I know that Honda carries specs over models sometimes and I was hoping you guys might know the answer. Thanks in advance.

@MrMountainHawk 2 жыл бұрын

Nice job. A lil ceramic coating before installing would have been a nice touch.

@ahcgarage 2 жыл бұрын

That’s a great idea. We wanted to do the same but awaiting for the material to arrives.

@AR-Shadow Жыл бұрын

Hi, i would like to know your opinion if this would apply for the 22 and up MDX?

@llobrao 8 ай бұрын

nice please dont stop with these TLX Videos big Honda/Acura fan and fan of your channel about to order these for this mod, can you list the rear part # as well ?

@IzzyyDuzzitt 2 жыл бұрын

Wonder if these work on the 10th Gen Accord

@eg619rip 2 жыл бұрын

Awesome upgrade guys. That rotor white finish wears off after driving it correct? It would be nice if it has a nice metallic finish like the OEM rotor

@ahcgarage 2 жыл бұрын

Yes, the finish will wears off

@cre8tivegarage157 2 жыл бұрын

I want some Brembo brakes 👏🏾👏🏾

@ahcgarage 2 жыл бұрын

Brembo for the win!!

@cre8tivegarage157 2 жыл бұрын

Wanna put some on my srt4

@aljaymorris4094 2 жыл бұрын

Looks great

@ahcgarage 2 жыл бұрын

Thanks!

@wert2000100 2 жыл бұрын

Can this be done with 2020 TLX SHAWD 3.5?

@killah893 2 жыл бұрын

Doesn't this void the warranty? I'm looking into upgrading my tlx brakes

@Cup0joe23 Ай бұрын

What were the torque specs for the axle nut when you put it back on?

@chuliao3 2 жыл бұрын

When are you guys modifying a Type S?

@ab7469 6 ай бұрын

Cna you please confirm if MDX and TLX brembo calipers are interchangable ? I got a good deal on MDX brembos for my TLX. Thanks

@94b20gsr 2 жыл бұрын

Can you guys measure center to center on the mounting tabs on the calipers? Would like to put these on my 2020 RDX A-Spec but need to make sure they have the same spacing for mounting to the knuckle. The next thing will be finding a similar size and offset rotor that's 5x114 to fit to the RDX.

@Stevendag 5 ай бұрын

Following

@andrewszabados929 Жыл бұрын

Hey guys love the video and have the Blue ASpec 2021 model with red interior and love the car. I was curios if this brake upgradr comes in blue?

@ahcgarage Жыл бұрын

Unfortunately they only come in Red

@godserena2720 2 жыл бұрын

Awesome mike! Do you think a 2021 mdx can get a bolt on brembo upgrade as well from a mdx type s?

@ahcgarage 2 жыл бұрын

I want to say yes since the MDX and Type-S are very similar

@201.briann 2 ай бұрын

Do parts lists differ if 21’tlx is fwd?

@jovanychavez7916 4 ай бұрын

Will these calipers clear the OEM wheels ?

@tnasituning8173 2 жыл бұрын

Love the upgrade, but IMO I would've went with R1 Concepts Carbon Alloy Cross Drilled Geomet Rotors instead of plain solid disc. And used stainless steel braided brake lines instead of the spongy rubber ones

@ahcgarage 2 жыл бұрын

Adding cross drill rotors and stainless steel brake lines would be a nice upgrades. However, we did not soft brake pedal with the factory rubber lines.

@manuelgallardojr.5545 11 ай бұрын

Would this work for a 2020 rdx aspec?

@Patrick94GSR 2 жыл бұрын

No clip of installing the hub back into the bearing? Hopefully the axle nut wasn’t used to pull it back together. I’m not sure if the bearing will fully seat using only the axle nut.

@Zaucey 2 жыл бұрын

I was wondering the same! I have NEVER seen the bearing get reused after separation.

@jessesawyer916 2 жыл бұрын

Thank you

@nrgonline 2 жыл бұрын

Exactly! Maybe they did that so they can make a video on how to install new wheel bearing after they go bad after this install?

@TopShottaFYC Жыл бұрын

What would be the best way to get the bearing back in? Press in a new one?

@Patrick94GSR Жыл бұрын

@@TopShottaFYC you don’t really put the old one back in. You press out the back half of the bearing in the hub, and remove or cut off the race on the hub if reusing the hub, then press in a whole new bearing assembly before pressing the hub in.

@wattahouz100 2 жыл бұрын

Sweet I love it

@ahcgarage 2 жыл бұрын

Thanks!!

@josecolon7052 3 ай бұрын

Can I do the same to a 2019 tlx a-spec?

@rickyperez46rp 2 жыл бұрын

Hell yeah !!!!

@thewanderer612 Жыл бұрын

Very nice! I just bought a 2021 A-Spec SH-AWD. How much did the brembo upgrade cost total? And what mods does this A-Spec have to make it go from 0-60mph in 3.7 seconds? I need those mods!

@MWAclanGaming Жыл бұрын

Big turbo upgrade, intercooler upgrade, intake,downpipe,flex fuel and tune.

@phatista Жыл бұрын

I can throw these on my G1 TLX?

@ghost32087 2 жыл бұрын

Thanks for uploading this! Would this caliper work on a '19 TLX 2.4 fwd?

@trackshun 2 жыл бұрын

Google

@ahcgarage 2 жыл бұрын

It will not be direct fit

@raymondleung9197 2 жыл бұрын

Great write up. I got the Type S brake kit as well for the A Spec. So what is the process of bleeding the brake since it is an electronic pump on the reservoir. It throw me an error light on my dash. Thank you.

@ahcgarage 2 жыл бұрын

Thank you. We use a manual brake bleeder and since it has a check valve, make it super easy to bleed the system efficiently and no need for an extra person to assist. Here's the link to our brake bleeder: amzn.to/2ZIRazl

@raymondleung9197 2 жыл бұрын

@@ahcgarage great! I’ll pass this info to my mechanic

@Spviet 2 жыл бұрын

Is it possible to apply the same set of front break caliper and disk to the rear wheel as well?

@ahcgarage 2 жыл бұрын

The rear calipers are the same as the Type-S with the exception of not being in Red

@supercyan4869 2 жыл бұрын

Do you think process will be same once the Integra and Integra Type S come about? The prototype they showed had Brembo brakes which are Type S only, but I wonder if they would bolt up to normal Integra's.. Guess we'll have to see once they come in. Hoping so

@ahcgarage 2 жыл бұрын

I am sure will be very similar

@andys1548 2 жыл бұрын

I always wondered about this! Now I know! Will the A-Spec 255/40R19 wheels impact the fitment due to the larger callipers?

@ahcgarage 2 жыл бұрын

The A-Spec wheels will clear the Brembo calipers

@rickyperez46rp 2 жыл бұрын

Gold ! Amazing content !

@victorsantiago222 2 жыл бұрын

Un trabajo excelente todo preciso

@ahcgarage 2 жыл бұрын

🙏🏼🙏🏼

@Medinabros2007 2 жыл бұрын

Sin duda alguna Exelente trabajo saludos 👍

@Frank-ts9wx 2 жыл бұрын

all that money into an Aspec, Glad I waited and got the Type S Love it

@ahcgarage 2 жыл бұрын

Congrats on your Type-S

@FrankieJ1981 2 жыл бұрын

That makes it inconvenient when changing pads

@ahcgarage 2 жыл бұрын

Good point

@gabrielvalentino7629 2 жыл бұрын

Beautiful TLX 🤭😊

@ahcgarage 2 жыл бұрын

Cheers!!

@gabrielvalentino7629 2 жыл бұрын

Cheers 🥂😊

@PennywiseM3 9 ай бұрын

Is it absolutely necessary to change the brake dust shield? Will this Type S setup work on a 2022 Acura RDX A-Spec SH-AWD?

@ahcgarage 9 ай бұрын

The brake dust shield replacement is a must because the type S brake rotors are much larger than the stock unit

@robertalicea5585 2 жыл бұрын

Wonder if those brembos will fit a 9th gen accord V6

@wesd991 Жыл бұрын

Bolt pattern is different. Your better off swapping it off a 3rd gen TL-S

@robertmyers5763 2 жыл бұрын

Any idea if the Brembos will fit on a 2018 TLX A-Spec V6?

@ahcgarage 2 жыл бұрын

We have yet to test fit them but highly unlikely to be bolt-on

@bobit8742 2 жыл бұрын

it must be nice when there is no rust, everything come right off haha. that's one bad tlx

@ahcgarage 2 жыл бұрын

Yes, it's like legos

@TheDanny652 Жыл бұрын

HI @ahc garage i have ordered the brake kit for my TLX but acura discontinued the brake bracket on your part list. Can i do the instal without it or is it not do able without it

@ahcgarage Жыл бұрын

Definitely recommend to replace it with the correct parts

@justinylee 2 жыл бұрын

Why did you not replace the rusted hub and install the correct hubs at this point? The mounting screw not lining up on the hub would've bothered me if I didn't correct it.

@ahcgarage 2 жыл бұрын

Since the hub is made out of steel and not stainless, even replace with new one, it will will rust regardless

@ChrisKirby112 Жыл бұрын

This is a great video. I have a ‘22 MDX Advance. I’d like to upgrade the brakes to the Type S Brembos. Would the process be identical to your video for my MDX?

@AR-Shadow Жыл бұрын

Im wondering the same too.

@mosesl659 24 күн бұрын

same here!

@raymondleung9197 2 жыл бұрын

Off topic: have your tech ever try putting a short ram intake off a 2.0t Accord onto the 2.0t TLX? I see someone put one using a HPS short ram. Wonder if that is possible or do able?

@ahcgarage 2 жыл бұрын

We have yet to do so but it should be a pretty close fitment

@raymondleung9197 2 жыл бұрын

@@ahcgarage Thanks! I'll contact HPS performance to see if they have any set up for the 2.0L. I know they are working on prototype for the Type S intake currently. also do you have this on stock at your dealership? Brake Hoses (2): 01464-TGZ-A00 My local dealership do not and I tried to order through Honda HQ in Torrance it is on back order. Just like to see if you have any on your end in stock. I have everything for the brake kit except for those hoses. Thanks!

@humanresources2138 6 ай бұрын

Does AHC Garage do installs for the public?

@ahcgarage 5 ай бұрын

Yes, we do plenty of customer cars

@evann6596 Жыл бұрын

What are those wheels

@crakdoriginz5992 2 жыл бұрын

Hey AHC I personally have a a spec Acura tlx and have been wanting to put a cold air intake on it but I don’t know much about car parts and was wondering if you could point me in the right direction of which one to buy

@ahcgarage 2 жыл бұрын

PRL makes a Stage 1 intake system for the 2.0T TLX. Here's the link: prlmotorsports.com/products/2021-acura-tlx-type-s-stage-1-intake-system?_pos=10&_sid=4aae60db9&_ss=r As for the "Cold Air Intake", take a minute to read this article from PRL, super informative: prlmotorsports.com/blogs/product-development/2021-acura-tlxt-type-s-2-0t-intake-talk

@crakdoriginz5992 2 жыл бұрын

@@ahcgarage I looked up the cold air intake and says it’s for the type s is that okay?

@ahcgarage 2 жыл бұрын

My apologies, here’s the link for the 2.0T: prlmotorsports.com/products/2021-acura-tlx-2-0t-stage-1-intake-system?_pos=7&_sid=a987c7c02&_ss=r

@АндрейСейт-Джелилов 9 күн бұрын

Guys, can you tell everyone if the brake calipers from Acura TLX 3.0 will fit on the Honda Accord 2.0 CV2 body?Or will spacers be needed?Where can I order them and from whom?

@ahcgarage 5 күн бұрын

Unfortunately they won’t fit on the Accord

@salfernandez5534 2 жыл бұрын

What is the part number for the bracket that needed to be replaced?

@ahcgarage 2 жыл бұрын

Please refer to the desciption

@huntrusso Жыл бұрын

I wonder if these calipers would directly bolt up on the accord since the tlx is very similar to it

@ahcgarage Жыл бұрын

Unfortunately the knuckle setup is different between the two models

@ramac_rtr 2 жыл бұрын

Will that type S brake kit fit a 2021 Accord 2.0 T

@ahcgarage 2 жыл бұрын

Not a direct bolt on

@alucarus6 2 жыл бұрын

Wondering if these are the same as the MDX brembos. Was thinking that'd be cool to do on a base MDX as well.

@ahcgarage 2 жыл бұрын

We are working on a 2022+ MDX kit

@alucarus6 2 жыл бұрын

@@ahcgarage curious how the pedal feel is considering they designed it for those smaller calipers. Did they change at all or once you got that "wall" it just stops better? I noticed in the MDX that it's kind of squishy almost until you hit that wall before it starts to stop.

@alucarus6 5 ай бұрын

@@ahcgarageHey there! You guys still working on this kit by chance? I know theres quite a bit of interest in it.

@Ganbala 2 жыл бұрын

Guys i want to do the same thing to my 2020 TLX//// Some Advise o make a video about that /// Thanks

@ahcgarage 2 жыл бұрын

Will put that on our list

@amill1563 2 жыл бұрын

Would Akebono pads also work here?

@chadwagner1483 2 жыл бұрын

Any aftermarket pad will work as long as they are made to fit the type s.

@ryryssong14 2 жыл бұрын

Nice 👌🏼

@ahcgarage 2 жыл бұрын

Thanks 🔥

@KevinChristian7 2 жыл бұрын

This car is so fucking nice

@jeffsousa84 2 жыл бұрын

Any idea if this bolts to the RDX?

@ahcgarage 2 жыл бұрын

We have yet to test fit them but highly unlikely to be bolt-on

@justinmanzano2500 2 жыл бұрын

Are you going to be working on any Acura ILX’s any time soon

@ahcgarage 2 жыл бұрын

In the future

@justinmanzano2500 2 жыл бұрын

@@ahcgarage I love my aspec the k24 is a classic n/a engine would love to see y’all work on it. Best Acura and Honda content on yt

@JamesJonahJameson-MM 2 жыл бұрын

Wait wait wait! How did you get that hub back on? You guys are holding out on me.

@SeanGoVroom 2 жыл бұрын

You just...put it back on

@ahcgarage 2 жыл бұрын

@@SeanGoVroom Ha! 👍🏼

@JamesJonahJameson-MM 2 жыл бұрын

But why isn’t it in the video? I have never seen anyone put the race back on a bearing like that. Usually everyone just replaces them once they have been separated. And did they install it just by tightening down on the axle nut? IDK. I smell something stinky here.

@6oldust 2 жыл бұрын

At 10.49 you have the part number for the right bolt

@ahcgarage 2 жыл бұрын

All of the part numbers are in the description

@KK-ff4hr 2 жыл бұрын

Looks great, can these be used on a 2020 TLX with correct offset for wheel clearance. Another option can the 2006 Type S brembo work?

@ahcgarage 2 жыл бұрын

Unfortunately they are not direct bolt-on the first generation TLX

@rayortiz137 2 жыл бұрын

Will the calipers fit a 2019 3.5?

@ahcgarage 2 жыл бұрын

We have yet to test fit them but highly unlikely to be bolt-on

@emmanuelocasio6420 2 жыл бұрын

Can I do the same swap on my 19 tlx ?

@ahcgarage 2 жыл бұрын

We have yet to test fit them but highly unlikely to be bolt-on

@frankienieves5124 2 жыл бұрын

Will this kit fit a 2020 acura rdx

@ahcgarage 2 жыл бұрын

Unconfirmed, we will look into it

@TheDanny652 Жыл бұрын

Hi guys i just did this upgrade to my car and followed all your instruction now all the lights on my dash are going off but the car drives fine

@ahcgarage Жыл бұрын

You will need to use a scan tool to pull and reset the diagnostic code(s)

@TheDanny652 Жыл бұрын

@@ahcgarage is it ok for me to just reset them or should i take it to my acura dealership?

@TheDanny652 Жыл бұрын

Will there be anymore mods to this car

@ahcgarage Жыл бұрын

We should have more videos as more performance parts release

@justinthaw-bolton3142 Жыл бұрын

I tried to get the Acura dealership to swap out my 2021 Acura TLX a-spec brakes for the TLX type-s brembo brakes. And the service technicians said they wouldn’t do it.

@ahcgarage Жыл бұрын

Some dealerships have reservation since it's an upgrade and not stock

@mikea5205 2 жыл бұрын

If someone is really concerned about the rotor mounting screws, can they just use a Type S hub?

@chadwagner1483 2 жыл бұрын

Probably but why? The set screws only assist in assembly. They are 100% not necessary.

@mikea5205 2 жыл бұрын

@@chadwagner1483 - I heard they also serve to reduce vibration. Just what I heard.

@ahcgarage 2 жыл бұрын

Yes, you can always replace it with the Type-S hub. However, at that point, you will need to replace the front wheel bearings as well.

@TopShottaFYC Жыл бұрын

Will these fit with the stock wheels?

@williamb7574 Жыл бұрын

Yea

@ThaRamboOG 2 жыл бұрын

What about the rear brakes and calipers. They are so small in need of an upgrade

@ahcgarage 2 жыл бұрын

They aren't exactly small but an upgrade is always nice. Ps. Type-S has the same rear brakes as all of the 2nd Generation TLX models, only exception is red

@ThaRamboOG 2 жыл бұрын

Yeah that’s the problem. I’m still in search of what rear size calipers I can upgrade too.