You guys are definitely making a difference! I like watching Pj’s video from Lancaster and then seeing your more straightforward honest reviews/different perspectives

“And 80-pounds for the meat heads” 😂

Haven’t shot PSE on a while but between this bow and the Omen they’re making me consider them again.

Great to see more videos regularly. Can't wait to see what's to come

Gotta think thanks to folks like you manufacturers are now being more honest about speed ratings Thanks for the video Can’t wait to see what Mathew’s comes out with for 2023😁

Coming to your shop in late December mate, love your work and Make sure you take a break when you need it. Your videos with the simple introductions then the music are awesome. Honest unpaid reviews for the people. 👍

Great review . Eager to see the S2 cam . cheers and thanks for holding the manufactures feet to the fire regarding actual speed .

Great content, I really appreciate every video you post and you're not an idiot.

Great video MFJJ! As always, on point! I can t wait to try this bow out.

As an engineer, these type of videos are exactly what I'd be watching if I was working for a bow company. I can almost guarantee it's making a difference, most companies in general aren't called out on how BS their advertised numbers are.

My favorite time of year... bow reviews. Keep'm coming JJ

Love the good, honest reviews as I do all my own work and bow builds so it helps! Making a difference! I thought the Levitate review last year was a little harsh and rushed but loved this one. I'm a matthews shooter most recently with the V3 and got the Levitate 1.5 years ago. Matthews has been my backup since. Keep up the reviews and teachings as they're Amazing and help guys like me!!!!

Awesome man dig the reviews look forward to see wat they are all putting out

Y'all are making a difference at least with the viewers hoping to get a new one this year. Keep them coming

I love it you get in there and get it done awesome job you're the best at it on any bow review keep them honest 👏 👍

Dude! You are killing it! Keep up the real reviews!

I want a mach 34 with the EC cam..love the smooth draw

Another informative video!

Great review keep the videos coming

Very sick riser!

excited to see what the S2 Cam does!

Great review, just letting you guys know that this and a few other videos of yours only have the left channel of audio in the video. Probably not noticed unless someone has headphones in. Just letting you know for future! Thanks for the content!

I definitely think that publishing the tests is making a difference. You have to know that they watch the videos.

Thank you.

Good job. Very smart

Sweet looking bow.

can't wait to try one out

Thank you

Keep the reviews coming

Mfjj the techno Viking..! Damn good review.

Darton is now publishing a "ACTUAL SPEED" rating for their new Veracity bow. KZfaq archers are making a difference, keeping the bow companies honest. Before, they had to fear loss of sales to other companies who inflated their speed numbers. With lots of checks of speed online, they can benefit from accurate fps ratings.

Can’t wait to see the speeds on the S2 cam.

I think it’s good to start off with a light weight bow and load up the weight with front and back bars. If you have a heavy aluminium riser things can get heavy once youv got it balanced properly if you hunt with a quiver on.

That's a fast bow for that big of brave height and s2 cam I'd say will be super fast

Love the bow reviews keep it up!!!

You put in work and are a great guy for the archery industry. For the industry not to pay attention to what you're doing and how you check there stuff would be stupid of them.

Like this bow

I believe your reviews are making a difference. A prime example was last year's review of the Bowtech SR-350, where Bowtech sent you a second bow to test in hopes that it might come a little closer to their advertised IBO. Regarding the Mach 34, I purchased the Levitate last year as my 5 year upgrade. I like the Levitate, but will attempt to trade it in for the Mach 34 on account of the longer brace height and axle to axle. My draw is 31 inches, and the 6 inch brace height on the Levitate does affect my consistency. The Levitate is a great bow, just looking for a little more forgiveness.

A very good video.

I’ve got mine coming with the Evolve Cam.

Interesting bow, the only carbon I’ve seen so far that’s intriguing. I don’t know if you respond to these comments but I’d like to know what the riser length is. I do believe though, you need a bow press to take the tension off the system to move the shims.

lancaster went through the shim system and said it needs a press because without relaxing the string a bit then once you pull the shims the cam will not slide on the axle due to pressure

I have now seen a few of you videos and I'm a fan of you no BS honest opinion. In all the videos I've seen you measure relfex. Maybe on you next video when you measure reflex could you go more into detail on it. What it is, the good/bad etc. I briefly googled it but other Crap came up in my search. Just trying to understand what exactly it is and how it benefits or doesn't.

Nice looking bow. P.S Audio is left channel only.

Companies definitely had to take notice of multiple reviews calling out speeds. I have a feeling they will be a little closer this year

Have you tried the PSE levitate

I wish more companies would have a 75 lb max option on their bows.

The shims need a press to releases pressure off the cam.

Oh joy it’ll fit me at 32”

Hmm PJ Riley said it does require a bow press for the new shim system because you cant move the cam whilst its under load?? Question: Can these shims be fitted to the older bows, say the EVO XF33?

Man I'd looooooooove to know what this thing puts out at 33 inches at 80# 👀

I definitely don’t think it hurts that you guys point out the flaws in the bows and the inaccuracy on there fps numbers ripples in the water can turn into waves!

Is this the only new hunting bow pse came out with this year?

Can we use for target shooting

What target is that? The arrows came out real easy

Think that shim system is compatible with last year’s bows?

I’d like to know how this compares to the Hoyt rx7 ultra. Speed. Draw cycle. Balance. Noise and vibration.

Lancaster archery said you need a bow press for the shims

what pocket quiver are you using?

If the manufacturers really want to be up front with speeds they should have the guts to make videos of them getting these results and exactly how.

Athens Archery!

I’ll stick with my Bowtech solution. I’m getting 322 at same specs and big verifier peep not to mention buttery smooth draw cycle

Athens review?

You mean the meat heads with mohawks 😂😂

You still need a press with them shim design. Just saying

Feel like I’m still torn leaving PSE for Mathews

Why didn't you change the letter off on other bows you've tested recently? Or did I miss it?

The rest you're using,we can agree is knocking down speed ? Are you checking timing on a draw board and paper tuning beforehand ? A little more info as to if the bow is right out of the box or tuned a bit helps. For as little reflex as the riser has, thats very good speed. Just think what 4 inch reflex and 6 inch brace would be like ? Not bad. We are starting to see binary cams gain a bit more speed like they were producing a few years back. My favorite binary cam still is the Obsession Evolution designed by Keven Strother,the BK artist on the 2014 bow. 6 inch brace and a solid 350 bow but only in limb stop. We soon will be back there again. Fingers crossed. P.S. Mohawk is on point,wich I was able to rock one myself ! lol

Does it come in a draw length shorter than 29”? I thought u said 29-32. Could be mistaken

0:50 PSE's web site states that a press is required to change the spacers.

Price

Maybe it is helping to make them show real speed

Whats a 350 grain arrow for? Going through paper plates, just speed? Definitely wouldn't hunt with that arrow.

Ask Bowtech if they think the consumer is paying more attention...

Great review as always, thank you! Cam shims are a copy of PRIME, axis are a copy of Mathews and cams are a bad copy of Darton. Is any bow company actually developing something new at this point? (besides stupidly expensive accesories like Mathews). Wheel has to keep spinning but I don't think anyone with a bow from 3 years ago is missing something at all.

The carbon bows are nice if they're priced the same! it's a luxury when it comes to bows, not a necessity unlike carbon frame road bike these days!

Pse: let’s make it just a few inches bigger than the last one. -that’s what she said.

Pretty wild haircut bro. You did take up the hatchet huh? Divorce or what?

What about the 90lbs meat heads like me? Lol I'm 178lbs amd I shoot 87.5-90lbs comfortable hunting weight. Killed 2 deer this year at that weight but no one's making 90lbers in these high performance bows anymore. " no one needs to shoot 90" and your correct but it's absolutely advantageous too. I shoot a heavier arrow faster than most shoot a lighter arrow and I can cut through bone like paper. A LOT CAN HAPPEN between time of shot and the time the arrow reaches the animal. The animal can move in a variety of directions possibly causing bone abstraction and my single bevs blades on a 600gn arrow going over 310fps will slice through a humorous bone like paper and not redirect inside the animal. My body is naturally that strong and I draw with exceptional control and form. I want to see PSE Bring 90lbers back. This is getting frustrating. I made a xf33 87.5 lbs but the roller wheel on the cable guard shattered at the powerstroke in the cam and shit went Kaotic domino affect. Just total catastrophe. I don't recommend limb swimming the PSE bows over 5lbs over spec. 3 times I've had parts stock and aftermarket give out past 85. I want a 100lbs draw weight monster and the King Cobra BY APA is the only one and I do not like it...... HELP ME GET PSE TO DO 90#S AGAIN!!!!! MFJJ

Why I gotta be a meat head ? Draw lengths to damn short, so I made up for it with poundage! 🍻

You keep saying they are slow but your not testing under the ibo parameters that the bow companies are. They are not slow of their stated ibo.

the 80 last year wasn't bad but letting down was not going to happen.

Why do IBO numbers even matter and every reviewer tries to match it? I’m a 28” draw and likely will never shoot sufficient weight to ever see an IBO speed, and I don’t think I’m in the minority. We just want nice bows, that tune well and shoot fast enough for 3D or knocking down animals.

Large misinformation here. A bow press is required for the shim system. You can damage the bow by not using a press.

First

You have someone trying to impersonate your channel I reported it and tried to report channel but it will not load. Just thought you should know.

he's used to be 80 lber meat head. so why stop string building

Cant imagine spending $1800 on a PSE and they won't even have parts for it in two years lol

Again my left ear thanks about the video. You keep repeating this left channel only audio, it makes these videos unwatchable with headphones, thats little sad.

Dude those bows are so damn ugly

A lot of technologies Darton has sold to other bow manufacturers, cams, etc.