Great Job Josh! like the bow and Beard!!

Enjoy your reviews, short, to the point, and you don't hold back. Not looking to buy a bow at this time but still like to see what is out there.

The body of the bow reminds me of Gumby 😮

Thanks for the no nonsense review.👍

They done a great job of promoting this bow, it’s a rocket ship for sure but man it’s a pricey beast.

Enjoy your videos! Been out of archery for some time, but it sure has gotten expensive. WOW!

Awesome job again. Really like your content. Alway watch your reviews for insight before I buy. Waiting to try an RX-7. Looking forward to that review. Currently shooting RX-5 and RX-4. Actually like the 4 better. Again great job!

Man, if PSE and Mathews were able to join forces, you might have the ultimate bow. Combine a V3X 33 riser, including bridgelock, centered cable guides and parallel limb design and 6.5" brace height, with a PSE-style riser grip. Then throw on the previous PSE Evolve cam profile, with tweaks from the E2 cam that improve cable side load and efficiency. Whew. That bow would be perfect for western hunting through 3D.

Love your content!

Its grate to hear honest opinion.

Super light and fast. For the right situation it stands apart from the rest.

I just picked one of these up. 2 years later...this bow at 28.5" and 60lbs is amazing. Most accurate (for me) once tuned that I've ever shot. It is a stiff but smooth draw cycle and extremely light and unique.

I like your reviews great job. Any chance the vibration on some of these bows could come from the bow shop whisker biscuit you have on all of them??

What let off did you shoot with? Thanks for the video!

ya, not least bit objective. i am 59 yrs old, shot bow at 70lbs, by far the most forgiving, smooth, vibration free, bow i have ever shot, period! yes, price is crazy

I know you're a busy guy, but if possible, could you take a look at the pse altera?

I think the deal with the higher 'weight' bows (including the carbons) these past few years are companies keeping track of these reviews and know they sell bows. Moving weight around the bow to better balance and absorb shock/vibes stripped down like you said. If I strip all the dampeners and stabs off my RX4 Turbo it's a completely different bow in those categories.

Could you do a bowtech destroyer pse levitate comparison please. They look like very similar bows

Hearing you grunt and groan during the draw and watching you draw like you’re pulling a caterpillar D10 make me think a Mathew’s is in my future.

I like your content and I appreciate the time you spend. Wts, I've shot that bow with the same spec and there is no lasting vibration like you portrayed. At least in my experience with the levitate. In fact I was shocked at good the bow felt bare.

Great review, helps me make a decision! BTW, since it's not reaching its advertised speeds shouldn't you trade them and destroy their brand? Lol just jking.

I would like to see you shoot the bows with some stab and sight to make it a real world feel on the bow especially since everyone is going to put accessories on the bow. Maybe some shooting at 20 yards to give a feel on how easy or bad bows shoot and aim.

Can you please review one with the EC2 cam and preferably a gen II model as they are still producing these into 2024.

Thank you thank you thank you! You can really tell the last few inches of the draw is agressive. Compared to the evolve cam system is it a huge difference? Also for the evl and this bow what limb dampeners would you suggest for this wide limbs?

Which bow would you rather buy the levitate or vx3

"for all you meatheads out there that have to have that"....Love it. And true (I was a meathead once)

Turns out the manufacturers test their IBO speed in space. Zero air friction/gravity adds 13 FPS

Was it pulling 70 lb ?? And would the extra 1/2" A to A effect the speed ??

Hi Josh! Could you do a test of Obsession defcon M2-7? Kind regards Robert

Please review an APA black mamba and a Bear refine!

Scale of 1-10, how good is it just overall?

Enjoy your reviews on here but I have to say this one I have to disagree. I went bow shopping and really didn’t want to even try this bow because of the review. Watching that big hump at the end didn’t interest me at all. I shoot Elites so very smooth draw. The shop I was at had one so I thought what the hell. This bow at 80% let off was a way different animal. Liked it so much I ordered one. Like you do with the bow techs flip disc I would like to see with the Pse let off changes as well. Again enjoy all your reviews.

This bow is tailored for western style hunters especially with long draw lengths. You can tell its a bit aggressive on the cam but what do you expect? That speed has to come from somewhere....

Found a used 2008 monarch by diamond bowtech . Wow fellas . I ve heard they were awesome and then shot one . It’s smoother than my new Hoyt torrex and no fishtail at all . That’s why there’s none for sale on the market ? I think they were a grand and re selling for $600

What was the let off set at

What limb dampers do you recommend?

The draw is a little stiffer on the back end of the draw..Ill take that all day long because its really fast and quite (almost as fast as the Xpedite)...I have a mach 1 carbon and this bow has next to no vibration in the shot and is mouse fart quite..and when you strap these PSE carbon bows to your pack you will have to keep reaching back to see if its still there and you ll agree when you're on top of the mountain the price was worth it...there so damn lite and they shoot as good as any bow I ve ever owned...

Whatever is holding my right shoulder together... That draw cycle is sure to destroy it. Outstanding review.

Center of axle pin to center of axle pin .maybe the out to out measurements is off because of that .just a thought great videos 🇺🇲🇺🇲

Are you going to get a Elite EnVision fir a review please ?

What's the reflex on the Levitate/Mach 1?

“ really stiff in the back end “ 😳

Like i mentioned in previous comments cannot go wrong with Hoyt torrex XT one ! For the price and performance on a same test 330fps awesome bows without breaking your wallet! No need to spend 1900$

MFJJ-any dates for the rest of PSE 2022?

When's the elite envision review

I’m curious about what you had the let off set at and whether the fps would be better if it was on 80%

Ive owned a ton of bows and the levitate is my favorite all time. I got a mach 34 and sold it because I didnt see an accuracy difference and the levitate is faster.

Stabilizer will reduce vibration as well, want speed your gonna have aggressive cams no way around it.

Was this at 90% let off

Be honest , was it stiff draw or do you need to hit the weight room ?

Should've tried different let offs like with Mathews and Bowtech flip disc

Is it 7-800 dollars better? Probably not.

What let-off was that?

Compounds dominate over any other bow .

how much speed would be saved using a drop away as opposed to the biscuit? just curious

In your opinion why did you say the V3X 29 was slow at 332 FPS on a 340 IBO but this bow you say is fast at 335 on a 348 IBO?

How can your chrono be off for every review

What let off? I shot the 2020 Mach 1 at 90% and the draw had a terrible hump at the end. At 80% it was there but not nearly as bad.

Change to a drop away and take the vanes off. You get around 345.

What bow release are you useing sir???

2300 in canada. We always get screwed.

Every bow he has tested out has been a little more than 10 fps off. Maybe he needs to recalibrate his chronograph. It’s like scales. Over time they loose some calibration no matter how good the brand.

How much faster is it without the vanes, as we all know (every company) do there speed tests with just a bare shaft?

335 fps is really good imo .

you shoot it with 3 blazer vanes through a whisker biscuit --> you have to add 5 fps at this speed range so it's damn close to the spec...

Still got ez green presses?

Someone hates PSE didn’t even address the new cam system and the differences they made with the carbon.

$1900 bare bow, hand shock, loud, hard draw. Hhmmmm but it was designed by Dudley, where’s my credit card!

$1900 for a bow with stiff draw cycle, annoying hand shock and speed of 335fps? Absolutely NO.

It sounds quiet too …

Riser looks like the old black kids compound bows lol. There's alot of performance packed into this thing but I think personally it looks like ass

It may be fast, and light, but hasn't everyone figured out that doesn't make or brake your hunt? A happy medium, a balance, somewhere in the middle....etc. has proven to be the best, most consistent bows on the market. There's a reason why Mathews is probably the highest selling bow in the country and they realistically don't change much year to year, other than fine tuning smoothness. Basically the same cam for many years now. And I'm now a Mathews shooter, but PSE even with Dudley, will never be the quality or consistency of a Mathews or Hoyt, and they want a fortune for that thing. If you haven't figured out you don't need a 3lb bow and 340+ FPS, go ahead and spend away.....just an opinion like everyone else's.

Bowtech solutions ,338 fps is faster

600 to 700 dollars over due to the name associated (Dudley). Not worth it

13fps off ibo??? Pse junk!

Looks like a boat paddle

After shooting this bow and watching this review It’s very clear this dudes a matthews fanboy. This bow is incredibly smooth and fast. Hes built like a 14 year old girl and made it look like he was drawing back 200lbs haha. And he didn’t even tune the bow to factory specs before testing. 1/2” longer ata makes a huge difference. Terrible review

There’s no wayyyy in hell I’m buying a $1900 pse Mathews makes ten times the bow that is better in every aspect for way way way cheaper

i could never shoot a pse the deer would laugh at me carrying that thing thru the woods

Same as the past. Ugliest carbon bow on the market! All in the performance they say. I have known a few that could suck a golf..... exactly!

It's just so ugly

Archery supplies more in-depth review m.kzfaq.info/get/bejne/gbV2n8eVmc7ZYZ8.html