2023 Woodworker Holiday Gift Guide - Great Gift Ideas For the Special Woodworker In Your Life!

Рет қаралды 12,755

Күн бұрын

This is my 2023 holiday gift guide for people with woodworkers in their lives. None of these items are the most expensive but good quality items that you might not have thought of previously! NOTE - NOTHING IN THIS VIDEO IS SPONSORED, these are all my personal picks!
1. STAMTECH Branding Iron - amzn.to/49QWeRF
2. Arsenal 5870 Tool Roll-Up Pouch - amzn.to/3uuxWNg
3. Milwaukee Detail Sander - amzn.to/49QR5cd
4. SUIZAN Japanese Flush Cut Pull Saw - amzn.to/40U4Dj3
5. EZARC 6 Piece Wooden Bench Chisel - amzn.to/3RedSrt
6. Goodjob Premium Japanese Whetstone Knife Sharpener Kit - amzn.to/47MWmzW
7. Taytools Brass Carving Mallet 12 OZ - amzn.to/49HSIsK
8. Amana Tool Countersink with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing - amzn.to/3QSSiaz
9. NEIKO 01409A 12” Electronic Digital Caliper - amzn.to/3urJGQG
10. Bessey K Body Revo Parallel Clamp - amzn.to/3SUDaMv
11. Kreg KMS7102 Table Saw Precision Miter Gauge System - amzn.to/49QXG6z
We are a new channel and would eternally appreciate if you like our content to like and subscribe so we can continue to make great content for you! You can subscribe at / bitnerbuiltwoodworking
FIND ALL MY TOOLS HERE! My amazon Influencer store! #Commissions Earned
www.amazon.com/shop/bitnerbui...
As an Amazon Influencer, I earn from qualifying purchases
Contact us for business inquiries at: Justin@bitnerbuilt.com
Like us on Facebook at / bitnerbuilt
Now On Threads @Bitnerbuilt
More from Neiko
/ neikotoolsofficial
/ neikotoolsofficial
/ @neiko5677
More from Amana Tool
www.amanatool.com
More From Suizan
www.suizan.net
More from Ezarc
www.ezarctools.com

Пікірлер: 38

@Githy1378 6 ай бұрын

You Sir are quickly becoming my new favorite woodworking channel to watch. Your Videos are always well produced and well thought out. Thank you for the work you do for us.

@BitnerBuilt 6 ай бұрын

Wow thank you very much! I try!

@mellymel1100 6 ай бұрын

Good thing that you mentioned sharpening the chisels. I didn't know when I got them that they needed it out of the box!

@BitnerBuilt 6 ай бұрын

Oh yea 90% do need sharpened out of the box. There are some great videos out there on how, I wouldnt rate my skills on that as teachable yet 😃

@poconojoe90 6 ай бұрын

Love this channel! Keep ‘em coming.

@BitnerBuilt 6 ай бұрын

Thanks! Will do!

@onsapplikasies8620 5 ай бұрын

Great list. I either have the item or really want the item LOL. The one that has made the biggest difference for me, is the Amana Tool Countersink with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing. I bought it for a project and now it is the most used drill bit I have.

@BitnerBuilt 5 ай бұрын

Good to hear, I love it as well totally worth the price

@lisahumlicektaylor2682 6 ай бұрын

I love that you explain about the use for the tool. Thanks for such informative videos.

@BitnerBuilt 6 ай бұрын

You bet!

@vernsteinbrecker3759 6 ай бұрын

Great video

@BitnerBuilt 6 ай бұрын

Thanks!

@dngriffiths8105 6 ай бұрын

As we've come to expect from your videos, Justin, a lot of thought and effort went into providing actual value to the viewer. Thanks for your thoughtful and transparent approach.

@BitnerBuilt 6 ай бұрын

Wow thank you so much!

@dian3145 6 ай бұрын

Nice assortment! I looked for that sander for 6 mos locally, ended up needing to buy on line. Now use it for every project in some way. Also great for little helping hands. Thanks for the recommendations 🎄

@BitnerBuilt 6 ай бұрын

Thanks very much, yeah, I love that thing it is definitely not just an attachment you put on an oscillating multitool!

@TheBillder 6 ай бұрын

Great video. I'm still building out my incoming wood shop so I love to see these kinds of videos

@BitnerBuilt 6 ай бұрын

Thanks! Good luck with the shop!

@jimrosson6702 6 ай бұрын

Great tips Justin thanks for sharing

@BitnerBuilt 6 ай бұрын

Thanks Jim!

@MrIdiotkiwi 6 ай бұрын

I, too, started with Makita tools, and then ended up buying some Milwaukee ones because they were the only battery powered option available. That little sander is quite good for detail work, although I am using it for construction/renovation/diy around the house. The paper lasts pretty well too, which is great because in my area there is no alternative to the Milwaukee paper for it. It also works a lot better than a Multitool sanding pad.

@BitnerBuilt 6 ай бұрын

Good to hear, yea I love that little guy and same with the paper for me, does last pretty long luckily

@Ekrindul 6 ай бұрын

That countersink bit is what I need. I've been using a set from Dewalt that is OK, but an upgrade would be nice.

@BitnerBuilt 6 ай бұрын

Yea it’s really nice, had mine for a few years now!

@ST-0311 6 ай бұрын

Good video. I like the all types of tools you recommended, which was a refreshing change from the typical Pica pencils and DeWalt drill / driver kits everyone else includes. I would change a couple of the brands though. For the miter gauge I think the offerings from Incra and Wnew are much better than the Kreg. They both have far more positive stops without the gimmicky pin. That pin looks like something that would disappear within a week. The Bessy parallel clamps are really nice. If one intends to really impress the recipient they are definitely going to do that. From a practical aspect consider the Bremmen parallel clamps which are a close second best, but cost half as much. Personally, I'd love to have 2 or 4 Bremmens rather than 1 or 2 Bessys to do bigger projects or more at once.

@BitnerBuilt 6 ай бұрын

Thanks for all the feedback! Haven’t tried a Bremmen, will have to take a look at those!

@Dragonited 6 ай бұрын

The small detail sander is something other makers have, though, as an addon sanding pad on their multitools. The Milwaukee tool even sounds the same as other multitools, so it's the same principle.

@BitnerBuilt 6 ай бұрын

Respectfully I’d disagree, an oscillating multi tool moves back and forth, this is an orbital (moves in a circle) so there is a big difference between them when sanding. I had a poker tray product I was selling and needed to constantly sand out router marks, the multi tool attachment would sand the area but leave scratch marks behind so I specifically went in search of an orbital detail and this was it (and a discontinued rikon) It accomplished the task without any scratching, which is what cemented my love for it!

@hossenfeffer8383 6 ай бұрын

I am trying to figure out how I graft a 12th recommendation onto your list so I can share it with my family, hint hint. That recommendation would be, an awesome shop just like yours, may not come in under $200, but hey, I’d say, we are deferring to the expert here and the shop is on his list. I know, magical thinking brought on by fumes and sawdust. Another great video! 🇨🇦

@BitnerBuilt 6 ай бұрын

Haha! That would be quite the Christmas gift!

@5280Woodworking 6 ай бұрын

Great gift ideas. Too bad the JessEm miter fell just outside the price range. It’s a dream to use

@BitnerBuilt 6 ай бұрын

Thanks! A cheaper one to consider would be the power tec amzn.to/3MYCrGj. That comes in at $99 my gut tells me that it it being a laser engraved fence your gonna want to cut the extrusion fence at 1in, only negative

@CycoBillywoodworking 5 ай бұрын

Fien has a complete detail set in the kit

@BitnerBuilt 5 ай бұрын

So does my Milwaukee and Makita multi but trust me this is better, its really one of those tools you need to try to be able to say “oh yea I get it now” etc