20k Down the Drain pt 2

Рет қаралды 20,812

Күн бұрын

We are going back together and talking too much while we do its
Thanks so much for all the support guys!!! Grab a shirt/hoodie/patch
www.bunkerbranding.com/pages/...

Пікірлер: 75

@holdenbros910 9 ай бұрын

Hey guys just a heads up, we drilled holes in the crossmember, but did not film it! Good lookin out guys! ❤

@robsdeviceunknown 9 ай бұрын

Please atleast put drain holes in that trans mount. It's going to get packed with dirt and mud. Let it drain or it will be a rust bucket in a few years.

@holdenbros910 9 ай бұрын

We drilled holes in it!

@davidball8 5 ай бұрын

Why not just box the whole mount?

@brianselt291 9 ай бұрын

Great fab work…Trans brace needs a weep hole at least

@Chauc3r 9 ай бұрын

I hope you are going to put a top on that crossmember so that it doesnt rust out from all of the water and debris that will get in it.

@30aught6 9 ай бұрын

Or at least drill drain holes

@sedrickwells8545 9 ай бұрын

Man I swear that's the biggest thing jumped out at me.

@holdenbros910 9 ай бұрын

We drilled holes in it!

@BobbiDazzler 6 ай бұрын

Loving this 20k down the drain series. You guys sure do things right. Soothes the OCD. Keep up the impeccable work!

@Gijeff69 9 ай бұрын

Speaking of Drains, you guys probably should put a couple in the crossmember you just made or it’s going to be full of mud in no time!

@dalegereaux1863 9 ай бұрын

Don't you just love it when you have to fix other people's sloppy work ? I was one job I never looked forward to. It was usually easier to just start over and do it right. Could show with explanations today. 👍

@andyt4795 9 ай бұрын

Bitchin! Thanks for dropping all the knowledge and the creeper skateboarding scene LMAO!

@MAGAMAN 9 ай бұрын

Nice shop safety lesson.

@xcool71x 9 ай бұрын

Poor Stephen bit it hard if that wasn't scripted then that was hilarious!! Another great educational funny video thanks guys

@stephenmiller6237 9 ай бұрын

I didn't know I wanted a Suburban with a Cummins, but the more I watch this...

@sedrickwells8545 9 ай бұрын

I had this model truck and now I want another one with a Cummins or DD

@builtbybo22 9 ай бұрын

Gonna be a wicked truck once you guys get done working your magic!! #BuiltByBo

@missingremote4388 9 ай бұрын

Awesome suburban 4X4

@andrewzach1921 9 ай бұрын

Comment for the algorithm, thanks for the video.

@Bearsnake_life 9 ай бұрын

It was great meeting y’all this weekend. Don’t forget about Rumble. Hope to see y’all on there soon.

@isomer13 9 ай бұрын

Great episode. Thanks, guys.

@danielduncan6806 9 ай бұрын

Oh hoho! Look who's fancy, with his flare tool... LOL

@SNAKERADIOS 9 ай бұрын

That was defiantly a Meth user who was bored and over zealous who made the exhaust lol. Wow man. Too funny. I feel bad for the owner of the truck. Ok guys keep killing it and never lift!!

@metalman065 9 ай бұрын

Like the other fella said, Either put a few drain holes in it or finish boxing it in, it's an open cavity for mud/ dirt to fill up, stay wet and cause it to rust out over time. Just and Idea.

@timothylindsey9081 9 ай бұрын

Haha, I see that I've already been beaten to this comment, but that cross member needs to be capped and have weep holes! Haha, easy to say when you're not the one doing the fab work, I've just had that drilled into me in the mechanical engineering world!

@chadthompson681 9 ай бұрын

Love you guys...from Demo!

@chadthompson681 9 ай бұрын

Wish I could give you more than 1 👍

@berhorst59 9 ай бұрын

Before I started the video, I figured you were blessed with another job from Matt

@sethspiker 9 ай бұрын

Mud and water is gonna sit in the cross member.

@someyoungguy6990 9 ай бұрын

I was thinking the same thing!

@mid-misage3416 9 ай бұрын

Was wondering if they were going to address that.

@user-xi7tf8je8l 9 ай бұрын

They could weld like a 20 gauge sheet metal top on it to keep the nasty out. Not like they need additional strength, just a cover really.

@brettwalker6016 9 ай бұрын

Knowing them I would assume they’re accounting for that. Always good to comment though just in case.

@chrissheathewoodguy 9 ай бұрын

one day getting a nice cnc machine I'm sure you would love to have.. I would want the top of the mounts capped so water and mud does not collect in them and rust out..

@keithreilly386 9 ай бұрын

You guys rock keep it up

@garymessina1609 9 ай бұрын

Great work great video thanks Willy and Steven and crew awesome job

@lordofpain3476 9 ай бұрын

Whatever shop did the original work on that truck should close up and switch to making fertilizer , because everything that they do is shit . I have built better set ups in my backyard than they did , they are embarrassments to the automotive industry . Thank the Gods of Horsepower that there are still shops like Holden Brothers that do it right.

@jontruax1 7 ай бұрын

I'm enjoying watching this. Just curious as the bill on this. Id really love to have one built or build one myself. Lots of great info here. Thanks yall

@markroper9269 9 ай бұрын

Cool video!! Lots of talking! 😝

@heyletsplaythis 9 ай бұрын

Watch some of muscle Rod shops, metal work, he can make the weld seem completely disappeared

@christopherwedemeyer2993 9 ай бұрын

Here's a 'mint fer yer 'rhythms....

@user-xi7tf8je8l 9 ай бұрын

Never used Kotzur, but I’ve had good luck with Parks Engine Service in Seguin. They’re not fast either though, but the Cummins work they’ve done for me has been good.

@trevm3647 9 ай бұрын

As close as the oil pan is to the crossmember, with rubber deterioration and torque twist. Dont you need a little more gap?

@knighttaylor4272 9 ай бұрын

When Willie is doing the work and his bro holds the camera

@user-xi7tf8je8l 9 ай бұрын

Why no muffler in the exhaust? Straight pipe 12 valves drone bad. Straight through mufflers help a lot with the drone and don’t create exhaust restrictions/ turbo spool issues like a chambered muffler.

@derek13p 9 ай бұрын

Kotzur for the win!!

@justinbrown8759 9 ай бұрын

Keep the videos coming

@eddyquesnel6033 9 ай бұрын

I would be worried that it being open on top it would collect trash.

@BOBKB5RLJ 9 ай бұрын

Put a drain hole or two or three or four in that transmission crossmember. I know you guys know better than that.😮

@SootyDiesel81 9 ай бұрын

Them side step mounts look a bit how ya going

@timothynaquin8899 9 ай бұрын

You need a white board for your "clear as mud" talks... Lol

@BrentTully-ct8hn 9 ай бұрын

@jamesbromstead4949 9 ай бұрын

How about using a flop tube in the fuel tank?

@jonkillian9434 8 ай бұрын

I paid a shop to install a sump / Fass 165 on a 2g Cummins. They put it dang near the front of the tank. My driveyway is steep. Half tank minimum or your bleeding going out. Then you promoted a 3in exhaust. Shame

@thef1sh17 9 ай бұрын

mahle = mah lee, per the germans that work there

@SimonElenor 9 ай бұрын

Get an ArcDroid!

@trxcummins7388 9 ай бұрын

Where was 20K down the drain part 1???

@desertvet1990 9 ай бұрын

Love your videos, but damn son, do you like to talk! Less words and more fabrication would make your channel a 1,000,000 subscriber channel

@hankclingingsmith8707 9 ай бұрын

Too much red bull

@tylerbarrett6652 9 ай бұрын

Okay... so I must have missed part 1... but here I am trying to figure out HOW you sent 20k down the drain - it all looks like legitimate expense to me.

@mid-misage3416 9 ай бұрын

Customer already dropped 20k for another shop to do the work, now Holden Bros are redoing everything that shop did.

@tylerbarrett6652 9 ай бұрын

OOOOhhhhh.... okay. Well now that makes sense. @mid-misage3416