#218

Рет қаралды 4,268

4 ай бұрын

GEAR DRIVE SYSTEM KIT- www.meepoboard.com/products/g...
Meepo Discount Link: www.meepoboard.com/?aff=21
Music by KV - Coasting
INSTA - / kamijuins
E-mail - j3i3s3@gmail.com

Пікірлер: 77

@KAMiJUINs 4 ай бұрын

If you have Voyager... 만약 보이져를 보유하고 있다면... GEAR DRIVE SYSTEM KIT FOR MEEPO ELECTRIC SKATEBOARD - www.meepoboard.com/products/gear-drive-kit-for-meepo-electric-skateboard?variant=40269578436702

@user-sn9od2cy4v 4 ай бұрын

the sound of this particular gear drive is amazing

@KAMiJUINs 4 ай бұрын

I agree and I liked it. it sounded more like an electric car :)

@ratheonhudson3311 4 ай бұрын

I always admire the work of others, but also the workmanship of the manufacturers too. Thanks for opening it up. Also, the sound is perfect.

@KAMiJUINs 4 ай бұрын

Right. These days, it is felt that manufacturers are also trying to show consumers a lot of things. Thank you for watching :)

@sladewilson9741 3 ай бұрын

I just took her out for her first gear drive test drive. I have the V1 Voyager. Wow. Feels like a whole nother beast. I never got her up to full throttle. Just. Wow.

@KAMiJUINs 3 ай бұрын

Thank you for watching and I hope you're satisfied too :)

@logs8833 4 ай бұрын

looks really cool I'm still more into the flexibility of belts but its a really cool thing for people that want to configure it once and run it with minimal maintenance

@KAMiJUINs 4 ай бұрын

I think so too :) Thank you for watching.

@divisionbreak 4 ай бұрын

Beautiful Meepo Gear-Drive set up. Thanks for the review.

@KAMiJUINs 4 ай бұрын

Thank you for watching too :)

@divisionbreak 4 ай бұрын

You are welcome I have been watching your videos for the past few years already, from the earlier experimental electric boards you started making... to all the commercial boards out there you had review. Very good very professional👍🏼.감사합니다

@user-oj7er2rv2b 4 ай бұрын

최근에 엄청 추웠는데 테스트 하시느라 고생하셨습니다^^

@KAMiJUINs 4 ай бұрын

네~좀 춥긴 추웠습니다 :) 시청감사합니다~

@klause9105 3 ай бұрын

very well manufactured gear system. Also the sealing. Just have fear the grease will be out of the gear in some time and be next to the gears. A system that brings the grease back into the gears would be helpfull. Or it needs to be opened to put in grease again.

@MadDonJuan 4 ай бұрын

Nicee bro, thanks for sharing, I had a few questions and you covered them all here

@KAMiJUINs 4 ай бұрын

I'm glad it helped you :) Thank you as always broooo.

@NoLimitstoRide... 3 ай бұрын

Like always a mega info video my friend, thank you

@KAMiJUINs 3 ай бұрын

Thank you for coming, Brother :)

@Cosasdepatinetes 4 ай бұрын

As always, an excellent video with very valuable information. The Gear Drive is interesting and like everything it has its advantages and disadvantages. I think the almost 0 maintenance is a very good reason. All the best!!!

@KAMiJUINs 4 ай бұрын

Thank you for watching too :) Yeah, I agree. that's a good reason

@Volcom23ed 2 ай бұрын

I wish I could send my Ecomobl ET, its not turning on. I have a brand new battery and ESC for it, I installed them but I'm not a pro at taking apart boards and putting them together. I love riding them though. I would pay you bro, you really know what your doing when it comes to electric skateboards.

@user-tz5oo8ji4b 4 ай бұрын

I think these boards should come with this and not something you have to pay a lot for afterwards.

@mochatheaustralianlabradoo7316 4 ай бұрын

Sounds like you’re just poor

@TheAegisClaw 4 ай бұрын

@@mochatheaustralianlabradoo7316what a juvenile comment.

@user-tz5oo8ji4b 4 ай бұрын

Sounds like I know like Ryanair the companies want to sell a lot of extra afterwards.@@mochatheaustralianlabradoo7316

@robras2850 4 ай бұрын

@@mochatheaustralianlabradoo7316sounds logical and you sound like a dick

@loklokey7882 4 ай бұрын

I think there will be a new voyager comming out with Lights on the board and also with this gear system. The voyager xl

@skfunk4550 4 ай бұрын

I have to give it to Meepo for making this a very easy swap for someone who isn't too confident. Thank you for the in depth review as usual 😀

@KAMiJUINs 4 ай бұрын

Thank you for watching too, bro :)

@eBoard3R 4 ай бұрын

*Another build/assembly video* 🤩 I think I want those cable connector holders for my Flow modification 😂 after changin to thinner risers. Don't need it but I want 😂😂 Looks better than my normal connector holders. Really does sound like a mini jet engine 😲 Great to see gear drive on this classic boosted form factor. I still love belt drive though lol but wow, you can use this gear drive with 85mm cags 🤩

@KAMiJUINs 4 ай бұрын

If you lived next door, I would have knocked on your door and put a connector holder in your hand lol. Yeah, the drive noise of this GearDrive sounded exceptionally good and was a little different from other GearDrive sounds. And as you say, it's the only gear drive that can be mounted on the front of a truck, gearing that can be mounted on a classical boosted-style board. It's also the only gear drive available for 85mm cagus thanks bro :)

@gabrielpursley2812 3 ай бұрын

Just ordered mine today as birthday gift! I'm hoping to find abec adapter for it however to run 100rovers!

@KAMiJUINs 2 ай бұрын

Happy birthday and enjoy your ride :)

@wulfrobinson-millar9579 3 ай бұрын

I've been running my Voyager belt-drive since I got it. Another problem, specifically with belt and gear choices is..... There is too limited motor movement to properly accommodate the correct tension! My "small gear" with the correct belt is almost at full motor "extension" when the belts new. By the time the belt is "broken in" I can't get enough tension IN the belt for it to be tight enough! At which point, I can't even use the same belt with the next gear size up, as NOW I can't get enough slack on the motor to get it on! Or, for the "largest" gear, the change the wheel mounts on it {so you need a completely DIFFERENT model of wheels entirely!} but you still come into the same tension issue! THIS is where I have lost-snapped the most amount of my belts!

@-PROMETHEUS- 3 ай бұрын

Looks like it would fit the NLS3 Envy! ill have to compare the measurements you made. 🤞

@KAMiJUINs 3 ай бұрын

Make sure to check the size of the motor and the specifications of the motor shaft too :)

@-PROMETHEUS- 2 ай бұрын

Unfortunately you are correct about the motor shaft, it is a smaller diameter for motor shaft to accept the new gear. @@KAMiJUINs

@nottherealmccoy4955 4 ай бұрын

Fantastic review, crashed my Voyager when small stick jammed in belt at 43 kmh, had to replace deck so super keen for this! Looks very high quality, just like your content! Would I need to buy the full kit or just the gearbox using my motors & trucks? THANKYOU!! :)

@KAMiJUINs 4 ай бұрын

Thank you for watching :) Of course, if you have a Voyager, it would be financially beneficial to only replace the gearbox.

@worachart111 4 ай бұрын

Nice gear drive

@KAMiJUINs 4 ай бұрын

Yeah, It was :)

@alexfroese-or9tc 4 ай бұрын

Hey kami, great video as always, I was just wondering what speedometer app you used

@KAMiJUINs 4 ай бұрын

Thank you for watching :) the app name is Speedometer from apple app store

@alexfroese-or9tc 4 ай бұрын

Thank you!

@Mikeonabus 4 ай бұрын

Thank you

@KAMiJUINs 4 ай бұрын

thank you for watching too :)

@yudami0705 4 ай бұрын

혹시 기어드라이브랑 벨트드라이브랑 큰 차이가 있을까요?? 마지막에 영어라 정확한 해석이 안되요 ㅠㅠ 영상 항상 잘보고 있습니다!

@KAMiJUINs 4 ай бұрын

기어드라이브 장점 - 내구성이 좋습니다. (외부 이물질등을 보호), 관리적 측면에서도 따로 신경쓸것이 거의 없습니다. 항상 균일항 성능을 느낄수 있습니다. 단점 - 부품 가격이 비쌉니다, 고정식 기어를 사용함으로 기어비 변경이 불가합니다. 벨트드라이브 장점 - 부품가격이 비교적 저렴합니다, 단순한 구조로 수리가 용의합니다. 휠풀리교체가 가능하며 기어비 변경이 가능합니다. 단점 - 외부 이물질로부터 드라이브 보호가 기어드라이브에 비해서는 취약합니다. 경우에 따라 벨트 끊어짐, 텐션 조정등 벨트 관리가 상시 필요합니다.

@yudami0705 4 ай бұрын

@@KAMiJUINs 아하 그렇군요!! 감사합니답

@godfriedm9991 4 ай бұрын

one thing for sure caught my attention was so much grease inside unlike ACEDECK' s boards....so frugal😅

@KAMiJUINs 4 ай бұрын

I like that too :) Actually, as far as I know, customs clearance is difficult in China if grease is applied. The reason was that grease is oil-based and can cause a fire. So other companies have found it difficult. But I don't know how Meepo did it

@_Zer0202 4 ай бұрын

Good review broo 😊👍

@KAMiJUINs 4 ай бұрын

Thank you as always, Bro :)

@andreasfischer1649 3 ай бұрын

How do you compare this to the Acedeck element 2 in 1 gear drive kit?

@KAMiJUINs 3 ай бұрын

This one : 2.4 gear ratio(Good top speed even in 12s battery configurations), small volume for smaller diameter wheels to use Acedeck: 2.7 gear ratio (Powerful torque due to relatively large gear ratios than meepo),So, It is not difficult to use a relatively large wheels

@BlankofMaterial 4 ай бұрын

Gear drive is clearly the superior system. I like my hubs for stealth but when i buy a new system it's going to be gear drive.

@KAMiJUINs 4 ай бұрын

I also hope you try it next time :)

@esk8unity 4 ай бұрын

how is it clearly superior ?

@nicod974 4 ай бұрын

Long time no sée👍

@KAMiJUINs 4 ай бұрын

Thank you for coming again :)

@Matt-ob3ek 4 ай бұрын

Think it would work on other boards like Backfire?

@KAMiJUINs 4 ай бұрын

I explained the specifications of the GearDrive box mount in the video. If you have a backfire, compare to it.

@Matt-ob3ek 4 ай бұрын

@@KAMiJUINs curious if meepo controllers are close enough to the same

@kevinchan4951 Ай бұрын

Will this work as a plug and play on the meepo envy?

@KAMiJUINs Ай бұрын

It seems impossible because the motor specifications of Envy and Voyager are different. If the motor specifications are different, the amount of power consumed is different, so it is difficult to perform well even if it is replaced.