Looks like I’ll be doing this install next on mine as well! Thanks for another great video!!

Love your build!!! Im on the same path!!! 💯💯💯

Another good video. Keep it coming.

I’ve been doing a lot more reading and watching videos on how to properly set up and adjust the end links and sway bars. Seems you have to adjust the center collar on the end links while the suspension is loaded and you don’t want any tension on the bar while at ride height. I installed the exact same end links and sway bar front & rear like you, but definitely need to go back and check everything over again and re-adjust the end links….

I've been using the sway bar links that came with my bc racing coilovers and one of them failed the other day and the car is making a clunking sound. Piece of junk coilover set all together. Should have spent a couple hundred more for something better. Anyways, I just bought the smy end links since I already have their rear lca and toe arms. I wanted to go with smy since they have a lifetime warranty for their parts. I made sure to purchase everything from their website too to make sure any warranty claims are fast and easy. Hopefully they never fail but if they do I have that peace of mind.

Bro this car is so built you need to do autocross or something. I want to see it all in legit action!

Endlinks should have been adjusted with weight on the wheels. Best to do this on ramps.

Can anyone comments on turn-in response and rotation in the corners? I never stiffen the front as the rear stiffness increase of 30-50% fixes all the WRX factory understeer. Used to autox, so can't sort out why anyone would ever stiffen the front one unlees they like pushing through corners insteaf of getting the rear to rotate.

Front sway bar was fun and so was the motor mounts. This install should be good. Talk about a real pain in the ....

Hi Joey, I have a couple of questions, if you don't mind. I'm installing the Rallitek 1.5" lift springs on my WRX. I also got their HD front end links; do I start at the tallest length as mine is opposite from your setup? I'm also going to swap out the rear lower control arm with one from Cusco. The instruction manual is in Japanese. On Parts List #7, there are four plates that go in between the washers. Do you know what they're for?

Hey there, I am installing fortune autos and smy links soon. Question, in your fortune auto install vid you used the stock end links, did this push the sway bar down do to the car being lower and the stock links being longer? You mentioned just keep the adjustable links the same length if you got them and install them. Did you keep the smy links oem length as well? I just had silvers on the car and got terrible clunks. Brought to a shop and they confirmed it wasn’t an install issue. Trying to avoid any issues with the fortunes. Thanks

Trying to remove my stock sway bar and having a hell of a time getting it out of there. I have the stock J pipe 😡

Did you have to put grease in the endlinks before installing?

Im looking to buy the SMY endlinks. Any updates on them? No clunking noise after having them on for a while?

I have 70 000 miles on mine and the owners manual does not say anything for engine carbon buildup my 2022wrx is stock .should i be concerned about carbon buildup? And if so is there anything that will remove it without the cost of wallnut blasting?