223 Trainer Build: My Most Accurate Rifle EVER?
Рет қаралды 174,611
2 жыл бұрынFull Story: bit.ly/3uiEAUL
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Few things are as rewarding as shooting the rifle you just built on your lathe. This satisfaction is compounded when your rifle's performance exceeds your expectations! And that is what this video is about: my long-awaited 223 trainer build.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Precision Matthews
- Benchmark Barrels
- Bat Machine
- Berger Bullets
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
@rob1135 2 жыл бұрын
That pile of bullets and brass is worth more than a 401K account nowadays…. LOL. Glad to see you are still able to produce content Gavin
@huntersmark917 2 жыл бұрын
the lathe he bought is $20,000, upgrading from the $17,000 lathe sitting in the corner. That's pre-tooling cost.
@cheatinggravity173 Жыл бұрын
@@huntersmark917 a new quality lathe is sooooo nice! If i had the cash I'd splurge for sure. I mean, you can get a new truck for 40-70k...what would bring you more enjoyment? Lathe for half that for me for sure... priorities😀
@bradthompson3720 2 жыл бұрын
I live vicariously through your amazing shop setup, machining equipment, products, and shooting environment. Well done!
@Ultimatereloader 2 жыл бұрын
So glad you are enjoying the channel Brad. Thank you for watching!
@siege78 2 жыл бұрын
same here! I'm not a machinist or gun smith but have been fascinated by the idea of being able to build my very own bolt gun to the exact specifications I want for the purpose (or just as an experiment) I intend. @Gavin - hope to see you at King of Two MIles some year, would very much like to sit down and have a beer and just chat about rifle building.
@DavidHerscher 2 жыл бұрын
Yeah, I pretty much love and hate this guy all at the same time. Love him cause he's living his best life, but also watch all his videos whilst slamming back shots of hater-aide
@jeffallen3382 2 жыл бұрын
Congratulation on this trainer build Gavin! You really do put the "Ultimate" in Ultimate Reloader!
@Eroc556 2 жыл бұрын
I love this channel! It can’t get any better and Im thankful we get to be taken along on this accuracy journey with you! So thank you Sir!
@Ultimatereloader 2 жыл бұрын
Interested in an Ultimate Reloader custom rifle? Sign up on the list here: ultimatereloader.com/rifles/ Hi everyone! Some people have asked "why a 223 trainer?". There can be lots of reasons- removing recoil to train on other aspects of shooting, being able to train with low cost bulk 223 ammunition, barrel life for match gun (Example 6mm Creedmoor- barrel life can be as low as 800-ish rounds). 22 trainers are great, but don't have full bolt throw, etc. I like this rifle so much, I would consider shooting tactical class with it. Each person has their reasons for training with different rifles and calibers. Glad we can respectfully discuss here!
@janosvadas 2 жыл бұрын
Cost and Ballistically, I’m likely going to run the Bergara B14R and my savage .223 trainer for a few years. I have built up way more reloading supplies for .223 Remington and shoot sub MOA to not justify a bigger caliber until my skills and ability justify a 6 or 6.5 mm class rifle. $3.50 or less for a box of .223 vs $10.80 for a .260 Remington using Lapua brass and ELD-M/X bullets. More reasons TO build a .223 rifle than not. Ballistically, it may be a rainbow arch, but there’s more Ballistically similar using that .223 and if you match that to the 6 or 6.5 chambering, you’ll find they are more similar for adjustments than not. Within their limits. Gavin, there’s another video session for you. Comparing and matching different calibers and ballistics and their dopes.
@lexusowner2924 2 жыл бұрын
Interesting reply, though it doesn't hold much weight. Recoil: If you need to remove recoil from a 17-20 lb 6 dasher with a muzzle brake on it by dropping down to a 223, well then you are just a wimp, sorry. Low Cost 223 ammo: Where is the savings? In order to "save" a few cents per round, you are going to spend thousands of dollars again, because remember you've already done this once for your match rifle, on a new optic, receiver, trigger, barrel, match-grade dies, brass, powder, and bullets. Assuming you never wear out that 223 barrel, you'd have to shoot hundreds of thousands of rounds to begin to actually save money. In reality though, that isn't possible, so you will never actually save any money and the whole time you aren't shooting the gun you're actually competing with. Where is the logic there? Barrel Life: If you want to save your barrel life then don't load hot rounds. 6CM barrels burn out at 800 rounds when they are pushed to the max. Load a few grains off max and see what happens to your barrel life. In addition, barrels are relatively cheap. How many barrels could you buy for the cost of that 223 trainer? If you want to shoot it in a tactical class then cool, but that's not a training rifle, that's a match gun for a different discipline. Bolt throw: well, I guess you got me there, a 22LR does not have the same bolt throw as a SA receiver. For me though, its pretty hard to see how spending 6k justifies this one aspect. 223's are fun and I'm glad you're enjoying it, most people do, but the idea that it is a trainer that is going to save you money is just silly. It's another rifle, that's it.
@janosvadas 2 жыл бұрын
Hornady match ammo is $37.99 a box of 20. I reload it for $3.90 a box. .260 Remington is $65 a box for match ammo. I reload it for $9/ box. Economically, it totally makes sense to shoot a .223.
@72opelmanta 2 жыл бұрын
@@lexusowner2924 he is talking about recoil in the sense of keeping the scope on target to spot your shots, not that the recoil hurts his shoulder... PRS shooting is done without a spotter so it's on you to spot and adjust hits and misses... I do agree with you on the part that thousands of dollars on a gun build to save on ammo and wear on a match rifle is a excuse just to build another gun and not a viable financial reason lol
@sakusalo-tuisku4305 2 жыл бұрын
The main reason i got a 223 in same configuration with my primary comp gun was the saved reloading time. It's so easy, fast and cheap to just pick up couple boxes of decent bulk 223 and hit the range. Plus i can reload heavier pills for it and use it as a backup gun if i do shoot out my main guns barrel and can't get a new one right away. And it's ton of fun to shoot 😆
@captaincripple7218 2 жыл бұрын
You do a great job of explaining your processes! there’s something to be said for your ability to simplify something so complex and explain it in a way a novice can understand!
@MonarchMountainRanch 2 жыл бұрын
I have a 223 built by KW Precision and I love it. I'm shooting 80 grain Bergers and it's a dream. Great video!!!
@agbrown308 2 жыл бұрын
Flat out dream build! And that new PM leaves me speechless. I love your content 👍🏻
@rafkend1422 10 ай бұрын
Amazing Gavin!!! I am seeing you materializing my dream come true with this build. I just finished my frugal version of a build using Howa mini varmint barreled action in .223 and did my second session of shooting. Topped it with a Riton 3X 6-24 scope and a Bell & Carlson M40 style stock. Adjusted the original trigger to 1.5 lb. With handloads of 55gr Hrdy FMJ and 21 grains of 2200 powder I got a group of .310. Very proud of my achievement for someone with seriously depleted physical dexterity and advanced age. However, my most excitement is watching you realize the awesomeness of the .223 and seeing it materialize. Thank you a million from a fellow Washingtonian.
@ianwoodward1554 2 жыл бұрын
What a beast of a build, I thoroughly enjoyed it. You have forgotten more about guns, than I know. Very, very informative.
@dinoc.5537 2 жыл бұрын
Well Done! Congrats on the new rig! So glad you gave it a dedicated action over messing with the bbls. I even see a dedicated stock in your future. The rigs are both going to shoot great, so there is no point to swapping things back and forth. Looking forward to the load work and range reports!!!
@jasonfiggemeier2499 2 жыл бұрын
Bro you have come so far with this channel, been watching since the rpr deer hunting videos and the stuff you build is nothing short of impressive
@Ultimatereloader 2 жыл бұрын
Thanks for being along for the ride! I'm having a lot of fun...
@h.d.tobybradshaw1464 3 ай бұрын
Great topic, as usual. Best production value of any shooting channel on KZfaq.
@kenorrah8072 2 жыл бұрын
Great to see some .223 content . In this world of latest and greatest cartridges it’s refreshing to see extreme accuracy and Gunsmithing on my favourite usable, accessible and fun cartridge .I will be very interested to see your reloading results . PS - great channel 👍
@yellowjacket548 2 жыл бұрын
Another great vid Gavin! That build looks like a very enjoyable companion to your 6. Enjoy it!
@tuckerjl 2 жыл бұрын
I feel that sense you go into so much detail about the product that you should at least give a ballpark of the prices of each doesn't have to be exact but ballpark would be quite helpful!! Besides that you do incredible work!!!
@MrFelix002 Жыл бұрын
this the best channel watch in regards building the most accurate rifle ive ever seen, wonderful stuff
@ronmartblog 2 жыл бұрын
Nice!! I’ve been wanting to get a great 223 trainer so I’m crazy jealous!! Awesome 👏🏻 🙌🏻
@cwreese345 2 жыл бұрын
I have a 223 Ackley Improved trainer that is identical in absolutely every way to my 6 Dasher competition rifle. I did the machining and built both rifles myself and both are incredibly accurate. Great video, keep them coming
@lars277 2 жыл бұрын
What do you get MV with that Improved. 3400 fps?
@cwreese345 2 жыл бұрын
@@lars277 I haven't maxed it out I'm shooting either a Sierra 77 or 80 grain matchking at 2,950 fps. The reason I went with the Ackley is the 40° shoulder, I despise trimming brass.
@bradbarley6639 2 жыл бұрын
My brain is in gun technical information overload... But why do I still enjoy watching? 😆 That is SO friggin amazing. Certainly the Ultimate Trainer!
@haganengr 2 жыл бұрын
Can't say enough about this .223 effort. Nicely produced video. Impressed with your lathe expertise.
@Ultimatereloader 2 жыл бұрын
Thank you!
@JohnSmith-jh1iy 2 жыл бұрын
Great work! Im so jelly of your workshop and guns.
@TacticalConsiderations Жыл бұрын
Wow man. Crazy build
@boricuaarecibo9259 2 жыл бұрын
You're on another level I'm new to reloading and I absolutely love it
@justink7928 2 жыл бұрын
Very cool Gavin. Glad all your hard work and precision played off. Awesome video too. What a great shooting .223. Wish I had one just like that. If you ever felt the need to make another I know 1 fan who'd be thrilled to shoot that out on the farm.
@brentwinkelman1990 2 жыл бұрын
So satisfying when a rifle comes together...built myself a 223 trainer a while back... definitely fun with no recoil...got some 75gr eldm to try now
@Ultimatereloader 2 жыл бұрын
Brent gets it! :) It's an awesome scenario isn't it?
@theegupper 2 жыл бұрын
Really liked the video. Moved from out west where i had access to a 1000 yard range to FL where 600 is all i have access too. Locals advice is to build a 223 trainer to be able to simulate wind calls at longer ranges when shooting out of state. Gonna have to pull the trigger on one. Thanks again for all your work on the videos!
@jnblawnandlandscapellc Жыл бұрын
Wonderful build!
@geraldmunk4660 2 жыл бұрын
Really informative video! And great build of the 223 trainer.
@tallyman15 2 жыл бұрын
Great build. Looking forward to load development.
@gregpallister8336 2 жыл бұрын
You videos are top notch, very detail oriented and interesting to watch. I love your new trainer something you should be proud of. Keep up the good work.
@Ultimatereloader 2 жыл бұрын
Thank you very much!
@sambenge9140 2 жыл бұрын
If every gunsmith only took this much time and attention to detail…the wait times still don’t remotely add up
@siege78 2 жыл бұрын
No doubt!! I had a Tikka built and it took over a year! I'm still wondering if my smith took my barrel for another build and ordered another. I was also supposed to get my original barrel back but never did. I will say so far into load development that its showing good signs for sub 1/2 moa
@huntersmark917 2 жыл бұрын
There's no real money in gunsmithing outside of precision work with high end clients. This means most gunsmiths have other sources of income.
@joelblackburn7177 2 жыл бұрын
Amazing build! Well done!
@christittle1131 2 жыл бұрын
For any the idiots give u slack about the rifle their just jealous they can’t do what you do. Great video as usual. Do you build rifles for people the public if not u need to am sure theirs tons of people out there like me love how much you pay attention to detail and for it to be spot on. God bless!
@lmnhd1971 2 жыл бұрын
All I can say is Holy Crap…. I can only dream of accuracy like that. Beautiful rifle, hope to see more videos with it..
@danielmastrangelo3778 2 жыл бұрын
This has inspired me to want to build a 223, not so much for training, but just for insanely accurate fun.
@bomullenaux7468 2 жыл бұрын
Awesome video, such high quality and easy to watch. I run a .223 AI that I absolutely love. Cheaper to shoot, good practice, and perfect to train the wife and kids on.
@cliffkirby8570 Жыл бұрын
Awesome! I love a 223, it's a lot of fun to shoot and inexpensive .
@cz-bundy6896 2 жыл бұрын
Damn I need to learn how to start building bolt actions damn! Great stuff Gavin thank you
@GetMeThere1 2 жыл бұрын
Nice idea. Beautiful build!
@rottanwelding 2 жыл бұрын
Nice job! Sure is fun building them..
@johnshipley9755 2 жыл бұрын
Fantastic build I love it, have been working on my own rifle build rimfire the cartridge is 17 Winchester Super Magnum barrel is Encore has 24",1-9 twist.
@stephenjohnson6841 8 ай бұрын
That is way beyond impressive! Thanks again!
@Ultimatereloader 8 ай бұрын
Glad you liked it!
@jackiemeyer2428 2 жыл бұрын
This is so up my ally. I have a very similar rifle system with the same ideas in mind. Howa 1500 Short action. 1:9 heavy barrel. Worrior suppressor with Tuner end on it. Nikon 6-24×50 Target reticle scope. AIM comoposite stock. Lapua brass Swift Scroccos 62gn bonded pills CCI BR4 primers Varget Supported by either my Sinclaire bipod or Farley with joystick. Benchrest is my style.
@rgthomson1 2 жыл бұрын
Nice build again Gavin, if i were in the US i would be sure to have a rifle built by you, but the gunsmith i use here in Scotland is really good too, keep up the good vids
@davidwilliams299 Жыл бұрын
Love this 223 build and content
@Ultimatereloader Жыл бұрын
Thank you!
@jonprice1623 2 жыл бұрын
That is one of the coolest rifles Ive ever seen! Total dream gun! Fantastic work sir!
@Ultimatereloader 2 жыл бұрын
Thank you!
@nicholdas Жыл бұрын
Very well done amigo
@redclover51 2 жыл бұрын
Really caught my attention with this one !
@stevefuller-dy5uz Жыл бұрын
Awesome shooting
@billylee2312 2 жыл бұрын
I’m building a .223 for training purposes. Mainly to get back into shooting consistently. It’s been a while since I’ve put rounds down range on a consistent basis. I’ve never shot long range it’s my goal this year. My sons and I are going down the reloading and long range rabbit hole together. I’m building an M4 and will throw a night scope on it when I have out grown it. We do have a b14 hmr 300 win mag with a sig tango 4 6-24 scope on the way
@Dang_Near_Fed_Up 2 жыл бұрын
Watching this only makes me want to build my dream rifle more than ever.
@brucec2635 Жыл бұрын
I'll get one lathe for myself and another for my son in law. This guy is amazing.
@gregstapp1684 2 жыл бұрын
Congrats on how it turned out ... 👍
@brazzy1467 2 жыл бұрын
My best shooting 223/5.56 is my Uintah Precision 223 Wylde UPR-15 upper. I also reload the 77gr OTM because that's what I used in the ARMY in my MK12. Awesome video.
@GTMGunTotinMinnesotan 2 жыл бұрын
I love it man. Just fun to shoot targets with. I have a Savage 12fv that still shoots pretty incredibly tight with match ammo. There's just something fun about a rifle that doesn't recoil much and hits exactly where the reticle is.
@Ultimatereloader 2 жыл бұрын
....and this will be a great varmint hunting rig as well!
@nickmcgee6438 2 жыл бұрын
Nice build Gavin. I started with a Savage 12 target action and a Shilen barrel. It's sits in a HS precision tactical stock. It's by far the best shooting rifle I have built. I run the Sierra 77 SMK with IMR 8208 and CCI 450s for awesome dime sized 5 shot groups at 200 yards. Congratulations on your build!
@Ultimatereloader 2 жыл бұрын
Awesome results Nick!
@russvaagen3004 2 жыл бұрын
I think I need to have you build me a couple of those. .223 and I was thinking 6XC. Impressive dedication to accuracy.
@jackiemeyer2428 2 жыл бұрын
Wow this such good news. I often think that .223 are like the unsung heros. So I try do everything with mine. Allthough a Howa 1500 in 1:9 twist. I loves 69gn SMKs nut it hard to find. So I am now committed to shooting Swift Siroccos 62gn but with a tuner on. I have used this rifle in 6ppc competitions just for fun. Does pretty good in IBS shooting out to 300m. Now just tune my barred and its off the chase distance. Thank you G for another great post. I sit and wait for them.
@madisonmullins4136 2 жыл бұрын
Veery good looking forward to seeing what it will do in better weather
@slamminhawgs9847 Жыл бұрын
nice, im building a 223 and 6.5 creed identical rifles so i have a trainer as well. nice build and groups!!
@glockparaastra 2 жыл бұрын
My Remington VSSFII 223 groups exactly the same with 50gr BK. I love it. A higher twist would be ideal.
@adamhenley7297 2 жыл бұрын
Fantastic video!!!! Very interesting, I love Engineering. I Think the rifle looks perfect. I would definitely have one. In fact, i want one!!!!
@G5Hohn Жыл бұрын
I had my Forster honed to 0.2445. Works perfectly with Lapua and other brass without overworking. Probably could go bigger, but I use a bushing die for that.
@superdave103harley Жыл бұрын
Unbelievable work brother, great job. You deserve it!!thanks so much for sharing... Makes us all jealous lol.
@terryspooner128 2 жыл бұрын
I'll Take two!!! :) That is one heck of a WOODCHUCK rig. :) 1000 yards with a 223 Remington? OMG!!!!!! Hope you succeed get ing out that far and look forward to watching your attempts with that rifle eagerly. :) It'l be soomething to see indeed.
@jessewilson8283 2 жыл бұрын
Amazing build! And love to have one custom built like that
@dantheman7624 2 жыл бұрын
Good job, nice shooting.
@davidpetersonharvey 2 жыл бұрын
Amazing job!
@livezero264 2 жыл бұрын
Great build and well presented. I should have pursued more machinist training in my travels. I will have to be content with using barrel nuts, good results so far.
@Ultimatereloader 2 жыл бұрын
Thank you!
@TigerCarpenter 2 жыл бұрын
this build has dropped my jaw, seriously. I was always wondering how to bore such a long hole precisely. I'm waiting for my 1st lathe to arrive, and it is not in that ballpark of precision and rigidity, but your build truly inspires me.
@sterlingwilkey2124 2 жыл бұрын
That would be a awesome rifle for ground squirrels. Awesome, video
@thelarry6864 2 жыл бұрын
Very nice job Gavin. We're all jealous, that's for sure. Keep up the great work and I've got 1st right of refusal on that beautiful build! : )
@thelarry6864 2 жыл бұрын
Oh, and just the Barreled Action. I gotta T4A Team waiting for it.🤣
@brunomartel6150 2 жыл бұрын
Nice job with this gun .
@hydrolife4365 2 жыл бұрын
So happy to see this channel growing so well.
@Ultimatereloader 2 жыл бұрын
Thank you, and thanks for watching!
@hydrolife4365 2 жыл бұрын
@@Ultimatereloader thank you for the great content
@0598980568 2 жыл бұрын
I have a Remington 700 sps varmint in 223. It’s a joy to shoot.
@DWhite-el4ih Жыл бұрын
Thank goodness you put the brake on.
@AKGuru4774 2 жыл бұрын
The main reason why I'm in school for machining. Just waiting for the day I can grab my own lathe to build a few RUMs
@jameshenderson9228 2 жыл бұрын
Nicely done
@Ultimatereloader 2 жыл бұрын
Thanks!
@seanmurphy243 2 жыл бұрын
I'm doing the exact same thing as I'm watching this, putting together a 223 AI that's very similar to my 260 and 6.5-284 Norma. Hopefully mine is this accurate!
@Unknown42001 2 жыл бұрын
Imagine if he started his own gun business, I would love one of your custom builds
@chazt4863 2 жыл бұрын
Awesome build Gavin...the results speak for gunsmithing and reloading expertise! I shoot on the same rest your using and was wondering what kind of track plate you have installed on your ARCA rail?
@mr.2d749 2 жыл бұрын
Always amazing 👍
@johnschniederjan1683 2 жыл бұрын
Yes that would be my dream gun.
@jacobbrazell8684 2 жыл бұрын
Such an awesome video!
@Ultimatereloader 2 жыл бұрын
Glad you liked it!!
@cornbreadburgess1950 2 жыл бұрын
Thanks Gavin for the video, could we see more tech videos,my knowledge is not up to speed,most people want to learn more.Thanks again brother.
@wayneschenk5512 2 жыл бұрын
Nice job.
@dylanschulz2404 2 жыл бұрын
I bought a 1440HD from PM about 4 years ago now. Been used almost daily since then. Had to repair some minor things on it, but overall a pretty good lathe! Also like the 223 plan. I put a 1-6 twist 19" barrel on an ar and am impressed with the accuracy and range I can get with the 88 ELD-M bullets. Supersonic out to 1200 yards. Not bad for a 22!
@Ultimatereloader 2 жыл бұрын
Awesome!!!! PM lathes rock...
@Seanconnery1st 2 жыл бұрын
This is the best content from you thus far Gavin. I’ve been inquisitive and curious about 223/223AI trainers. I think they aren’t just valid options, but super affordable with precision still in mind. This reinforces this. Thanks! Isaac
@klintonodonnell3318 2 жыл бұрын
That's a dream lathe right there. Maybe one day...
@Magnusintro 2 жыл бұрын
Awesome work! 👌 similar things happening here in New Zealand with a 223 class being created due to the shortage. How about a video about the oopsies you've had also! Plenty of stories to tell I'm sure.
@h200z 2 жыл бұрын
Wish I had one .. It's awesome ..
@wylecuplin3044 2 жыл бұрын
Love it.
@aklaunch 2 жыл бұрын
Hi Gavin, Thanks for another great video. I am eager to see how this rifle shoots at 1000, 2000, 3000, 4000 and 5000 rounds. Those will make great videos!!!
@Ultimatereloader 2 жыл бұрын
Thanks, yes this rifle will see a lot of rounds :)
@conservativesniperhunter7439 2 жыл бұрын
Another awesome precision rifle build Gavin 👍 . Gordy Gritters would agree I’m sure .
@Ultimatereloader 2 жыл бұрын
Thank you !!!!
@taps_1021 2 жыл бұрын
I would love a trainer like that for my son to train with. Awesome job 👏
@Ultimatereloader 2 жыл бұрын
Thanks 👍
@Ultimatereloader 2 жыл бұрын
Can you send an inquiry here? We are starting public work very soon! ultimatereloader.com/rifles/
@dukedenarie5858 Жыл бұрын
Dude I have a feeling you might become a very well known rifle maker. You’re still very young.
@ScottPriestley 2 жыл бұрын
Great build Gavin! I'm shooting a 26" 223 Criterion Remage Barrel in a trued Remington 700 receiver with Hornady 88gr ELD-M @ 2800fps using CFE-223. This is actually the first rifle I've used to get to 1000 yds and it's been so much fun! Enjoy your build!
@ScottPriestley 2 жыл бұрын
Oh yeah and my loads are only 45 cents a round!
@Ultimatereloader 2 жыл бұрын
Awesome!!!
@martinc.4699 2 жыл бұрын
I’m making a similar loan, so far pushed it to 2520 fps
@ScottPriestley 2 жыл бұрын
@@martinc.4699 What length barrel? Powder?
@martinc.4699 2 жыл бұрын
Scott Priestley 26” stabal 6.5
@timbeemon9131 2 жыл бұрын
Wow that’s awesome. Love the machine work, how did you deal with the crown?
@Forumrida38621 2 жыл бұрын
Awesome video Gavin! I just built a 223 as well with an mpa comp chassis and a 7 twist 26 inch m24 barrel. I loaded up some Berger 85.5 with 8208 and got it to shoot a .21 inch 5 shot group. They are so fun to shoot can't wait to see more on this rifle! Nice work
@Ultimatereloader 2 жыл бұрын
Awesome rifle you have! I may have to try some of the 85.5s :)
@Forumrida38621 2 жыл бұрын
@@Ultimatereloader if you do make sure you get em close to the lands.. I tried jumping em at like .070 and .120 and they were all over the place. But at .010 they were perfect. Also are you doing customer clambering at all or not quite yet?
@Forumrida38621 2 жыл бұрын
With yours being a 1:8 I would try the Berger vld 75 those bullets are awesome!
Ultimate Reloader
Рет қаралды 76 М.
Dual Stiller Builds: Impact Shooting visits UR - Custom 6.5 Sherman, Carbon 6 & 22 Creed+Varminting!
Ultimate Reloader
Рет қаралды 21 М.