28(ish) 3D Printed Tools That Are ACTUALLY Useful!
Рет қаралды 549,321
Күн бұрынYes, there ARE 3D Printed tools that you can actually use - and some are even more functional than the store-bought ones!
After all... is there anything more frustrating than needing a very specific tool to finish a fix or a 3d printing project, only to discover that you can't get it in time? Well stick around because in this video I'm going to share with you my top 28 ish 3D printed tools as well as tips for printing them, what they're used for and why I love them so much. These are some of my MOST functional and useful 3D Prints EVER... and I know you're going to love them, too!
🤫 Get behind the scenes and exclusive content on my Patreon: / thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
01:22 Bench Dogs for Your Work Table: www.thingiverse.com/thing:404...
02:27 Speed Square: www.thingiverse.com/thing:465...
03:55 Screw Measurer: www.printables.com/model/3216...
04:24 Improved Screw Measurer: www.printables.com/model/2088...
04:59 Fillet Gauge: www.printables.com/model/9673...
05:40 Keychain Version: www.printables.com/model/2767...
06:04 Makita Battery Holder: www.printables.com/model/5870...
06:31 Makita Charger holder: www.thingiverse.com/thing:438...
Cable wrap holder: www.printables.com/model/3031...
06:58 Makita Tool Holder: www.printables.com/model/2561...
My custom makita tool holder for Arrow Sheds: www.printables.com/model/2979...
08:17 3D Printed corner templates: www.thingiverse.com/thing:475...
Router version: www.printables.com/model/10693
08:37 Prusament clamps: www.printables.com/model/758-...
09:12 Remixed Prusament Clamps: www.printables.com/model/2473...
09:29 Pocket hole Jig: www.printables.com/model/9619...
09:58 Metric Drill Hole Guide: www.printables.com/model/1726...
10:22 3D Printed Scraper Tool: www.printables.com/model/1228...
11:13 Drill Bit sharpening tool: www.printables.com/model/1332...
12:20 Hand Shovel: www.thingiverse.com/thing:477...
13:08 Hole Measuring Tool: www.printables.com/model/2739...
13:25 3D Printer Nozzle Wrench: www.printables.com/model/8695...
14:14 Sanding Block holder: www.printables.com/model/1229...
14:42 Drill Stopper: www.printables.com/model/6844...
16:05 Bit Holder for Drill: www.printables.com/model/2076...
16:59 Glue Spreader: www.printables.com/model/8689...
17:33 Hose Adapters for Vacuums: www.printables.com/model/8093...
Drill Vacuum Adapter: www.printables.com/model/3886...
18:14 3D Printed Deburring Tool: www.thingiverse.com/thing:198...
19:21 Cable Soldering Jig: www.printables.com/model/1324...
LED Strip Jig: www.printables.com/model/1200...
19:40 Lazy Susan with an Empty Spool!: www.printables.com/model/3536...
20:25 Spool Drill Winder: www.printables.com/model/1165...
20:38 Filament Welder: www.printables.com/model/2911...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
RECOMMENDED VIDEOS:
👉 Hardware to make your 3d prints more useful: • Make USEFUL 3D Prints ...
👉 50+ Useful 3D Prints You Never Knew You Could Print • 50+ Useful 3D Prints Y...
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
🔔 Turn on Notifications
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinted
@thenextlayer Жыл бұрын
Thanks so much for watching! I LOVE hearing from you all, and I read every comment, so let me know what you think, or any ideas you have for future videos, in the comments below!
@Nevio_024 Жыл бұрын
Hi! A „Tools for 3d Printing“ video would be really nice!
@3dprintedhardware Жыл бұрын
Email me, I'll hook you up with my 3d printable tool set which includes hardware tools like an adjustable wrench, pliers and a 12 piece wrench set..standard and metric 👍 I have more tools on the way that will be added to the set, many of which are in the final testing stage right now. Although the tools in the tool set will work best if printed in metal or high temp hardened plastics, they are still fun and even useful around the house if printed in PLA, especially if your using the tools on newer, rust free nuts and bolts (or 3d printed nuts and bolts). I think this set would be perfect for your next "useful 3d printed tools" video. Btw..I just found your channel, looks awesome, I subscribed!!
@Nevio_024 Жыл бұрын
@@3dprintedhardware That sounds nice! Can I get that too? What‘s your email?
@glittalogik Жыл бұрын
I'm honestly so impressed with how enthusiastically you've taken on advice and constructive criticism, it's genuinely awesome to see your production and editing style developing - and your subscriber count climbing - with every new video :) Did something weird happen to the footage of you at 10:25 ? I'm watching in 1440p and that bit seems super compressed...
@Nevio_024 Жыл бұрын
@@3dprintedhardware Thank you!
@NochSoEinKaddiFan 11 ай бұрын
The way you used that pocket hole jig was actually painfull. If the drill is not the same size as the hole you feed it through to the wood, you don't have any benefit from the jig. and if it does have the same size, the drill will eat your jig, so you need a metal surface inside there. Good idea in principle, but this is a one use disposable tool if you use it right. And if you don't use it right, you don't have to use it at all, because it does nothing for you.
@josiahbaumgartner7643 4 ай бұрын
Waaah waaah
@IanFitty 4 ай бұрын
I wonder if brass inserts would be a good addition. Should be easy to find and hold up for a bit even though it’s pretty soft.
@NochSoEinKaddiFan 4 ай бұрын
@@IanFitty It might, certainly better than just trying to guide your drill with pure plastic
@dustyshifflett391 4 ай бұрын
@@josiahbaumgartner7643 I'm positive you are just as painful to watch use tools
@curtsiekert 3 ай бұрын
Perhaps this is true for someone like yourself.
@cmcferin Жыл бұрын
Would really like to hear about what different things like bearings, hardware, and others were super useful for you!
@thenextlayer Жыл бұрын
On it!!!
@bigdogbigben Жыл бұрын
@@thenextlayer Yes please
@almaefogo Жыл бұрын
M3 screws kit should be included with every printer most of the 3d printed things use M3 screws and nuts
@GenJester Жыл бұрын
Yeah sooner the better on this one. Aliexpress shipping times are slow.
@rolanddube2169 Жыл бұрын
I just subscribed based on seeing that video. I look forward to it.
@polarbearjf Жыл бұрын
Yep! Would definately love to see your 3D Printing tool collection, keep up the great work! Also the bearing screws etc you have for just in case projects would be awsome too!
@bc4yt Жыл бұрын
Super keen for the extra components video. Tools would be interesting also 👍
@svorwerk Жыл бұрын
Awesome videos man, I really appreciate the time and effort you put into the presentation of your vids. I just wanted to cast my vote for the video about the tools you use to improve your workflow. Thank you so much!
@ily9718 Жыл бұрын
An English speaking, Israeli, 3D printing content creator. Honestly kind of a rare sight. But glad to see 3D printing content from here though, and especially in English. Great production and content too. I have a bit too many printers and parts but frankly my organization surrounding them is a bit awful. I’ve been meaning to print a Gridfinity but it always seems like such a huge project.
@thenextlayer Жыл бұрын
Haha yeah. Though the famed designer Dizingof is Israeli too
@alexjunk6216 Жыл бұрын
I would love to hear more about all the extra components you have around for your projects or even what you have on hand to troubleshoot your printers. Thank you!
@RealSnail3D Жыл бұрын
Love your channel! Thanks for all your hard work, it shows and it’s helpful
@Bcjc3 Жыл бұрын
All the videos! Do all the videos you mentioned! We want to see tools for 3d printing. We want to see extra parts and hardware for 3d printing. We want to see every video idea you can come up with!
@thenextlayer Жыл бұрын
Deal!
@DEtchells Жыл бұрын
Another vote for a video on useful components(!) I’m all about having stock on hand so I have it when I need it, being able to just place one big Ali express order to get equipped would be great!
@thenextlayer Жыл бұрын
Awesome! Thank you! Make sure you're subbed, I'm already working on the video :)
@tomsmith3045 Жыл бұрын
Thanks for this! I was expecting the list to have maybe 3-4 useful tools out of the giant list, but you presented MANY useful tools. You also presented tools that weren't just specific to 3D printing, which is even better. I'd love to see integration of 3D prints with other building techniques, such as woodworking and working with metal. As an example, 3D printed bushings to work with steel square tubing, to permit rotation or telescoping designs that may require some mig welding, but that don't need lathe or mill work, because of 3D.
@thenextlayer Жыл бұрын
On it. Thanks for the feedback!
@billcs66 Жыл бұрын
The 3d list of part you need would be great. Thank you
@odw32 Жыл бұрын
For the bit holder: Try out carbon-fiber polycarbonate, it's slightly flexible but also very strong. It needs an abrasive-resistant nozzle, a well-maintained printer, in some cases a temperature-controller enclosure, a ~100c bed and a ~300c hotend. Your Prusa should be able to handle that though! It's definitely not my favorite material to print with, but it is my favorite in terms of end product properties. Another thing to try is to just make a "solid block" with slightly oversized hex-shaped holes in it, and put a strong neodymium strip embedded in the bottom to hold the bits in their holes. Absolutely loving your channel btw, and the clean look of your studio!
@LoeKie_Aus Жыл бұрын
There is never too Much Info or tips, BRING IT ON!!!
@thomasswenddal772 14 күн бұрын
You are just a fountain of great ideas, secondhand maybe or original I couldn't keep up with the flow but I'm seeing some real possibilities here. Thanks so much; keep up with these useful shop and fixing problems type videos. Everybody has a world of challenges.
@xMikeyG 11 күн бұрын
Honestly... Ive been on the fence about buying a 3D printer but never considered printing out tools. This for sure was the selling point.
@PDXGTP 11 ай бұрын
This topic is the reason I bought a 3D printer, I'm frustrated with suppliers not providing tools within a reasonable amount of time, over pricing, and missing design features.. I solved all of that by learning AutoCad and getting to know my printer. Thank you, it's people such as yourself that have helped me get to know the in's and out's of my printer.
@thenextlayer 11 ай бұрын
My pleasure thanks for taking hte time to comment!
@nightlurker Жыл бұрын
MORE!!!!!! Thank you, Jonathan, for these print ideas and tools videos, please let us have more of them. I would particularly like to see tools and storage for 3D printing, both FDM and resin. This video convinced me to subscribe, so keep it going, please.
@thenextlayer Жыл бұрын
On it! But I don’t do resin :)
@renierbonthuyzen9703 15 күн бұрын
Hey there. Just so you know. The fillet gauge is actually used to measure welding fillets. Many kinds of welds need a specific radius to comply with code.
@wayne6318 Жыл бұрын
So many projects, all of them are so useful and I can't wait to get started. The "Tool List" that you mentioned would be a great idea, hope to see it soon
@Mr2at 4 ай бұрын
Ordered my first 3D printer earlier today. This is the first 3D relevant channel ive subscribed to.
@jere7429 Жыл бұрын
yes a 3d printer tools video would be great just started 3d printing and its so awesome to be able to make your own things at home
@thenextlayer Жыл бұрын
Great, I'll likely do it :)
@therick0996 Жыл бұрын
i never need an excuse to spend money on 3D printing. bring on the tool list!
@mcdesigns Ай бұрын
Really enjoyed that video, never knew I needed some of them.
@joefairfax Жыл бұрын
Great video, I liked a lot of the tools you showed. I really liked the cordless tool battery and tool holders for organizing your small storage space. All of the suggested videos you asked about I think would be great.
@thenextlayer Жыл бұрын
ON IT :)
@genjitsu7448 4 ай бұрын
So the tools all turned out to look much more useful than I might have guessed. It is very impressive where this tech is going - it wasn't that long ago that I thought that 3DP would never really end up capable of production level parts but it is getting closer and closer. Great video!
@thenextlayer 4 ай бұрын
You should see the newer printers. This video is old and the parts were crappy. Today we have moved way past
@PTEC3D Жыл бұрын
Very much enjoy your videos. Enjoyed this one, radius gauges and bench dogs were new prints to me, thanks for finding and sharing.
@VastCNC Жыл бұрын
The onhand project items list I'm here for.
@thenextlayer Жыл бұрын
Nice. I will do it!!
@davidapp3730 Ай бұрын
Thank you for the great video. Being new to 3D printing I am just learning all that I can do with it.
@shanel4348 Жыл бұрын
Awesome video! I particularly loved the dremel tool sharpener; that was pretty genius. Thanks for all of the ideas!
@thenextlayer Жыл бұрын
Glad you liked it! Make sure you're subbed
@pospa7075 4 ай бұрын
Thank you so much for this video, I am beginner printer and I didnt know what to print, this video helped me a lot to decide what to print.
@juliehadley8336 Жыл бұрын
Bring on the video for tools to assist 3D printing! ❤
@jimlynch9390 Жыл бұрын
Thank you for the tools. It's great to see a master at work!
@thejurassicgameroom9344 4 ай бұрын
my first printer is in the mail, excited to be joining the "makers"(?) ranks. these videos are super helpful, bc I have no idea wtf imma do with a printer lol.
@williamweatherall8333 Жыл бұрын
The list of supplies is a great idea! I would watch it.
@MrRoelith Жыл бұрын
Would definitely like to see that video on what additional items you recommend keeping around. Thanks for the video!
@antoniovelez8780 Жыл бұрын
Loving the content, for a relative newcomer your stuff is super polished, a joy to watch. Keep it light, keep it fun, it's a hobby after all.
@thenextlayer Жыл бұрын
Thank you so much, this means a lot to me
@frankroquemore4946 Жыл бұрын
I normally only subscribe to a channel when: 1. It’s a channel where I enjoy most of the videos I watch 2. The videos are ones that I WANT to be spending my time on (I might enjoy fail compilations, but I’d never subscribe to a fail channel because I don’t want to encourage myself to waste time) You just got a new subscriber! And I’ve only seen two of your videos. lol that’s about as fast as I’ve ever subscribed to anyone. I really hope your channel blows up because you give some great information in a great package. Don’t be discouraged by a low subscriber count. I think many people (especially in the technical side of KZfaq) are slow to jump onto a bandwagon until that bandwagon is “proven” to those people. Your insanely rapid rise in view count should be an indicator of how unexpectedly helpful your videos are, and I think the subscriber count will lag behind but it will climb if you keep doing what you’re doing.
@RixTrix 6 ай бұрын
Please yes video for tools! And not specifically 3d printed tools, but actual tools I need. I just got my first 3d printer and I want to not have to head to the store every time I see a tool I’ll need.
@nickgunderson Жыл бұрын
Nice video! You showed a lot of cool things and the time spent on each one was just right! Looking forward to more of your work!
@thenextlayer Жыл бұрын
Thank you so much!
@nerdipedia1142 Жыл бұрын
I am totally interested in the additional videos you mentioned! Love this channel.
@thenextlayer Жыл бұрын
Awesome! Thank you! Make sure you're subbed, I'm already working on one of them :)
@NeoIsrafil Жыл бұрын
Is there anything worse than not being able to get a tool in time? Yes... waiting 14 hours for the printer to finish printing the tool you need, then realizing you didn't put high enough infill so you've got 18 more hours to wait for the stronger version to print and hope its strong enough. Lol. Still, nice video man, its true that it helps to be able to print tools that are hard to get.
@ashokmoghe8035 Жыл бұрын
I am DIY Hobbyist & Woodworker. I just bought a new 3D printer over the holidays. My goal for getting a 3D printer is precisely this i.e. building functional items around home & workshop. Your channel seems very much aligned to that same goal. Subscribed to your channel already & looking forward to more relevant content.
@iamcoderedd Жыл бұрын
You’re gonna fall in love bro especially if you’re in woodworking it’s so many things you could print 😭😭🔥🔥
@dovfeder3253 4 ай бұрын
Just ran across you channel and am very impressed. Thank you for you time and effort. Most importantly, I pray you and all of your loved ones are staying safe during these horrendous times. Peace brother. - Dov
@thepmiles Жыл бұрын
First video of yours I've come across and it re inspired me to get some prints going. Great Video, Thank you.
@thenextlayer Жыл бұрын
Awesome! Thank you! Make sure you're subbed, I have much more coming soon...
@JacksMacintosh Жыл бұрын
Loved this video! Definitely printing that speed square asap. Thanks, and shavoua tov!
@droidvegas331 Жыл бұрын
Great info, I'm on board to watch your content. Just subscribed and gonna binge watch everything!
@thenextlayer Жыл бұрын
Thanks! The best is yet to come
@Foxuniverso Жыл бұрын
i work with leather as a hobby, you just opened my mind in such a ridiculous way that i think i can say you changed my world. thanks dude lol, now i really, really want a 3d printer
@thenextlayer Жыл бұрын
WOW! Thanks! that's a HUGE compliment. Check out the Prusa link in my description, I still recommend that one :)
@TheLazyJAK Жыл бұрын
Love seeing a free open source sponsor!
@thenextlayer Жыл бұрын
Yeah, it's cool, right? :)
@jaamoe_ Жыл бұрын
Yes please do a vid on 3d printing tools.
@JohnLattanzio98 Жыл бұрын
I would love to see a video of yours on more useful prints!
@thenextlayer Жыл бұрын
Did you see the 50 useful prints? :)
@JohnLattanzio98 Жыл бұрын
@@thenextlayer yes and I loved all the things to make to solve so many problems! Your channel is really good
@stewartg2101 Жыл бұрын
LOL, literally only just watched your last vid and left a comment saying "hell yes" to the tool vid and low and behold here it is just like magic. thank you. Hell yes again to the 3d printing tools used in 3d printing vid. Loving this channel.👍👍
@Shaggyfauvorite 11 ай бұрын
Btw for all of the screw measurers and fillet gauge you don't need to print in 2 colors, you can print it in one and get spray paint. Spray some paint on a flat piece of cardboard and press the side with the numbers/letters onto the cardboard and voila, you have easy to read numbers.
@CoffeeandCancerStix 2 ай бұрын
Honestly you could just use a marker or paint pen to color the numbers
@Gomeyy Жыл бұрын
Just bought my first printer and been looking at videos to learn more about useful tools, cool first time prints etc. never would’ve thought this was a newer channel, earned a sub for sure!
@thenextlayer Жыл бұрын
Thanks! The best is yet to come. What questions do you have? I like ideas for videos
@SgtShadowCow Жыл бұрын
YES PLEASE for fasteners and bearings and press-fits needed for common prints. Received my 3d printer for Christmas, i am printing away and crash course learning and your channel is helping me immensely. thank you :D
@thenextlayer Жыл бұрын
its live in my library!
@PamelaBrandonChromeFoto 6 ай бұрын
This has to be the most useful video I have watched in a long time, so thank you so much.
@thenextlayer 6 ай бұрын
Glad it was helpful!
@wanderlust_vlad Жыл бұрын
Geez, will take some into work. Thanks a lot!
@The_Privateer Жыл бұрын
My favorite 3D printed tools are ones that go BANG! Yes, these are tools. They are not 'good' or 'evil' on their own. Only the user and intended purpose determines that.
@lsmedel00 Жыл бұрын
Wow this is really cool! can't wait to start printing the fillet gauge and the screw measure!!
@thenextlayer Жыл бұрын
Enjoy!
@sail4life Жыл бұрын
Great video! Thanks very much. Love 3d printed tools and handy gadgets.
@thenextlayer Жыл бұрын
Thanks for watching!
@SuperPapadave 3 ай бұрын
Well DONE !!! I learned a lot. Thx
@mol8821 Жыл бұрын
Love this! I’m going to be all over the tool and battery holders!
@thenextlayer Жыл бұрын
Get it!
@BobbyatTBP Жыл бұрын
loved this video and would be very interested in all of the videos you mentioned that you could bring out in the future
@thenextlayer Жыл бұрын
They’re all out. Check my other vids.
@flairder 7 ай бұрын
Ooh i love a list from ali express and the likes, for usefull things to have in stock/ on hand!!
@thenextlayer 7 ай бұрын
It’s live now check my older videos
@BestLittleStudio Жыл бұрын
I would appreciate a "wish I would have known I needed these parts" type of video.
@thenextlayer Жыл бұрын
That video is already out! Make sure you're subbed so you don't miss videos kzfaq.info/get/bejne/lctygdx23b_Rp4U.html&lc=Ugz-eX2F74H23mhxOBd4AaABAg
@mindlessjoker 11 ай бұрын
tools and accessories video for sure. I need to know the most common screws and stuff everyone is using.
@ryanmacewen511 3 ай бұрын
I'm happy to have discovered your channel!
@kiridox2517 Жыл бұрын
I preordered the p1p Bambu and it is shipped! Me and my friend bought 1 each to learn 3D printing together. it is tons of fun and cool to finally have bought one! We are both Starters to this and we have done a lot of training and watching youtube guides :D
@thenextlayer Жыл бұрын
You're gonna LOVE it
@chriscarrozza1820 Жыл бұрын
I am just starting so the parts list of bearings and bolts would be excellent! thank you for this video
@thenextlayer Жыл бұрын
It's already live, check out my other videos :)
@chazbarclay Жыл бұрын
Awesome. I'm gonna make some using my Tormach and anodize them. Thanks for the idea.
@Hydraks81 Жыл бұрын
I just discovered your channel, i'm sub, keep going ! Love all these tools ideas, i definitely will print some of them
@thenextlayer Жыл бұрын
Thank you !
@giantthoraway7526 Жыл бұрын
A general hardware video would be awesome! All I have are a few extra nuts and bolts that came with the printer and would love to know what things I should look for (actually… they might not have supposed to be extra considering the wobbliness of some of the components…)
@jimflorman2198 4 ай бұрын
As a leather worker, the list of useful tools is endless. Stamps, clamps, GLUE SPREADERS, clips, etc are super easy to work with. That said, the issue with creating a stamp is tough. You have to create a 3D design from a 2D picture. It's super tedious. If you have any suggestions on how to improve that process, I would be deeply grateful.
@antonypalmer5804 Жыл бұрын
Brilliant Video that gives me a list of things to print for my workshop.😁😁
@thenextlayer Жыл бұрын
Glad it was helpful!
@Your-boy_showinluv 7 ай бұрын
I hope you are ok out there during this time!🙏🏼 I appreciate all your help on 3d printing as well!
@wl7291 Жыл бұрын
Great video and lots of really useful prints. I can print some of these together also.
@tasmedic 4 ай бұрын
Yours is by far the best selection of printable tools that are actually useful. You're a clever guy. Please make more videos! One small thing. Maybe set your camera to fixed focus because it wanders a bit during some of your presentations. A minor thing, to be sure.
@stephank1965 Жыл бұрын
Very useful stuff. Thank you so much👏👏👏
@thenextlayer Жыл бұрын
Glad it was helpful!
@Noki0100 Ай бұрын
For the bit holder trying print it as a mold, then using a silicon pour so it has some give and is flexible when cured.
@Mirellas_creaties Жыл бұрын
I just orderd my first 3d printer and binge watching your videos. Can't wait to start, but have to because the printer has not arrived yet. Thank you for your helpfull videos, I'm learning a lot!
@thenextlayer Жыл бұрын
NICE! Glad to have you here.
@SanRuis7430 Жыл бұрын
Thank you, i am going to print 90% of these tools.
@thenextlayer Жыл бұрын
Nice!! So glad
@aviatorcustomwoodworking779 Жыл бұрын
Yes!!! Video for tools for 3d printing. Please!!!
@thenextlayer Жыл бұрын
Already on it. Make sure you’re subbed so you don’t miss it
@bleach_drink_me 9 ай бұрын
I found a useful tool last winter. Ice scraper. I tried PLA,PETG,TPU. I found tpu worked fantastic once it was cold(left in the car) petg was a good 2nd option. Also a nice little salt scoop printed from pla was helpful. We got hit with a surprise snow/ ice storm and i wasnt ready so i fired up the printers. Those solder jigs are useful. Print them from petg or better for temp resistance. I have one in ABS and another in PC.
@hentaimonster Жыл бұрын
A tool Video and An item on hand video would be amazing. I just got my first printer and am discovering so many things I can make around the house. I need magnets, screws, bolts, glue, and a million other little things.
@thenextlayer Жыл бұрын
Awesome! Thank you! Make sure you're subbed, I'm already working on the video :)
@JohnBlaze505 9 ай бұрын
I feel like alot of these 3d print tool videos dont have much to offer, but this video has a lot of great ideas!! Cant wait to print the makita battery and charger holders
@thenextlayer 9 ай бұрын
Awesome! Thank you!
@jay-by1se 6 ай бұрын
I like this channel for 3-D printing knowledge. I think it’s tough to talk about tools when you start out saying a speed square is that tool you didn’t know you needed. literally every single person who builds anything has 12 of them.
@deborahsimpson4968 Жыл бұрын
Yes to every idea you mentioned. Stiumbled on your channel and appreciate your work, Great video
@thenextlayer Жыл бұрын
Almost all of them are live now. Check the channel archive!
@joshnullentry4580 Жыл бұрын
this is a bunch of great ideas, thank you!
@shainewinter8264 Ай бұрын
"fill-et is something you put in the bbq" 🤣🤣🤣
@martshal Жыл бұрын
Yes, interested in both a "tools for 3D printing" video, and a listing of "things" that you think are useful for 3D printing projects. Also, if you've added some more to your gridfinity setup, splash a little of that into the above vids.
@thenextlayer Жыл бұрын
Oooh yeah. I’m doing a whole new drawer now so more coming soon
@mr.tarkovish2587 5 ай бұрын
I love printing impact sockets!
@zedular098 8 ай бұрын
Hey man, I am also new in the 3D printing world, and this video is really nice, keep up the good work, for few items, presented here really gave me great ideas for printing. Thanks
@adampayne5619 Жыл бұрын
A printing tools video would be great!
@pierrec1590 Ай бұрын
For a lazy suzan, you can also print two identical circular plates with a semi-circular profiled groove along the perimeter, where you put glass marbles as ball bearings.
@kcpth 11 ай бұрын
I really enjoy your content. I love how your timing for jokes. Well done. Awesome work... will look forward to your next content
@thenextlayer 11 ай бұрын
Thanks. Stay subbed. Much more coming soon
@rbid Жыл бұрын
WOW... just you read my mind on what I want to get... 1) A video displaying/providing a list of hardware for 3D printing (nuts, bolts, inserts, bearings,etc) with suggested links in Aliexpress... (Soon we have the 11/11 sales) 2) A video displaying/providing a list of companion tools for 3D printing like the ones you shared at the end. 3) A video explaining how to nail down the PET-G settings, including what devices may be suitable such as a filament dryer, etc.. Greetings from the Galilee :) --- Ricky Marek.
@thenextlayer Жыл бұрын
Nice. On it. Thanks for the video suggestions. The PETG one is one I hadn't thought of. Putting it in my queue. Any chance you'd come to TLV if I host a meetup here?
@rbid Жыл бұрын
@@thenextlayer Will be nice to meet even if we do not do a video.. although I will be happy to participate
@raymondmacdonald6276 Жыл бұрын
I will print too muxh of this. Also as an obico memeber great to see they support you
@Hangs4Fun 2 ай бұрын
Polycarbonate has better heat resistance than either nylon or Asa. And if you do what I do and use heated enclosures and annealing your parts after directly after printing you can take polycarbonate even a tad higher.
@drumcamper Жыл бұрын
The video on hardware would be great, I've experimented with some hidden / inlaid nuts and would be interested in more ways to implement that technique.
@thenextlayer Жыл бұрын
Awesome! Thank you! Make sure you're subbed, I'm already working on the video :)
Artisan Made
Рет қаралды 85 М.
Zack Freedman
Рет қаралды 1 МЛН
spline
Рет қаралды 532 М.
Cord & Wire
Рет қаралды 2,8 МЛН