I appreciate the effort, as much as it is exiting to create everything with 3d printing, significant better results can be achieved if all machining technologies are used together (together with all materials) according to to its best use-case scenario. Par example metal inserts for screws have significantly better performance then 3d printed screws. Then instead of printing flexible filaments, making cast form from pla and then casting flexible gives much better result. Of course it’s not possible to cast every form. I find seeking combination of materials and machining technologies give significantly better result than just pure 3d printing. It worth saying that there is sometimes significant investment in tools other than 3d printer. This also has to taken into account.

Also just a reminder not to follow your followers. Some vocal minority complains that you're not like all the other popular youtubers. If you were mimmicking what everybody else did and made the kind of videos they made then you would have no reason to exist. To be or not to be. That is the question.

No ender 3 v3 compatibility

what is the brand of 3d printer behind you?

Thanks for the video, but it really left me wanting to know way more than you really went over. Being multi material, I have liked to actually see material changes and how much is wasted. Also, it didn't seem like any of the prints turned out to what would be considered good quality. Seems like there was an excuse for each issue. We all know it can take some dialing in a filament profile but should be able to get at least one type printing well. Left me very unimpressed with the performance of the machine.

The fact that this is a filament drier is amazing, I was always bummed my AMS can't do that. Specially for the price

Hi Johnathan, I ordered the SV08 just because of this toolchanger project, and you recently introduced the SV08 and some modding on it. Maybe make another video that shows how to integrate DAKSH into SV08. Thats will be great

WOW! excellent work and thanks for making the video sharing your work too. I'm especially inspired by the heatsink that you designed and printed in aluminium using PCBWay's services, what a time to be alive!

This is awesome technology! Please dont pay attention to people here who only critise others having nowhere near the skills to create anything themselves. Keep going!

Love the little filament icons to denote which filament is being used on screen, but would love if the color of the roll roughly matched the color of the filament, especially when there are multiple at once so you don’t have to pause it to read through them all and figure out which is the blue and which is the orange and which is the brown

🇸🇩

those are absolutely the most horrific looking prints... Now we know whos in your pocket

Can you make a printer nozzle? With a 3d printer? Furthermore is it possible to mass produce cheap printer nozzles for cheap printer repair?(I know creality nozzles are like $15 it's just the question of can we?

I have LOTS of trouble with ASA, will try Magigo. I use 3DLAC but needs to be applied every time.

I live in a very DRY environment, and from back in my PRUSA days, I always hated PETG. Stringing. But with the Bambu Lab and AMS I LOVE PETG. Now I hate PLA because it breaks in the AMS.

Lol amazing, they sell printers to aerospae aka israeli gov aka us gov pays for it aka american taxpayers pay for this ! Hahaha i want in

Dude i really want to start a business paying people to blosm rip blender google.mqps just to make 3d models of existing peoples houses and buildings

Well this makes me bullish on 3d printing, i wish i could just invest in banbulab or a new startup in the us

What were you doing in israel ahahaha

Paying $133k for a model of a building when the real building costs $50k to build LOL

It took you way to long to finally spit out the first of 9 things. Damn near 4 min into this video. Sorry but no thanks. Thumbs down

Hey guys i want to replace my mitherboard fan can someone give me a good alternative?

I hope when you do a full review you really compare the printers construction, color changing waste, and ease of use vs the bambu A1 combo. Their prices are close enough that im really wondering if the kobra3 is worth it. Sure it has a fillament dryer, but afaik the axis are just roller bearings not even liear bearings vs the A1's linear rails

I guess my Anycubic Vyper will be too old to get support for the ACE but if not I definitely will buy an ACE unit

How on Earth does any reviewer of multi color prints not show the purge system and waste it generates compared to other brands? Also, I will always be skeptical of any reviewer who is paid by the manufacturer of the product shown in the video. Yeah yeah i know "my opinions are my own" but really...if you are getting paid and want to get paid and sent products in the future, are you really going to be that critical? And those prints don't look all that great either.

לא רוצה להשמע מפגר/ הייטר, אבל אתה יודע שאניקיוביק הם תומכי פלסטין?

9:56 “nice” so we’re ignoring that top surface

😡😡😡

Loved the raw and RL truthful parts of the video. You have another subscriber.

I really don't understand why manufacturer for klipper and make custom versions, isn't the whole pro of klipper that manufactures only need to provide printer configurations...?

A1 knockoff

God bless Israel!

One of your best video series, looking forward to more like this. Perfect videos aren't necessary, particularly with singular printers in their incipiency like the SV08.

When will u have the full review when it goes to retail?

until now kobra 2 max still not yet in orca slicer stable update, you have to manually create and tune it. I really doubt on their progress.

I bet there are plenty of people waiting for a Kobra 3 Max!

Ordered mine during the live stream event. Can’t wait for it to arrive. Thanks for showing some of the pre release stuff, not many videos out yet showing this printer working.

Fortunately I live in a 'Mystical Enchanted Meadow' where I have to drive 1hr to the nearest department store Walmart. Arkansas

Hey, my girl dog lifts her leg to pee sometimes.

75% humidity, bless your heart, try 96% humidity in Houston Texas 😂

OH man this looks a lot bigger then i thought. i may have to cancel my order. Not sure it will fit where i had intended to set it😥. But if they can get that AC E to work on none Anycubic that would be sweet. One thing i misread on the buy page. I read Pantone color exclusive camera as one item. so the whole time i though they were going to get the pantone camera, and that thing is sweet. oh well .

I hope this little bit helps you in your journey of being awesome. I watch lots and lots of people on KZfaq, but you are by far one of my favorite. Thank you for the clarity, and the excellent production videos. I very much enjoy the entertainment and education

If Anycubic makes that ACE unit work on other brand machines.....Bye bye Bambu. That would all but crush Bambus AMS proprietary system. As it is there are ZERO reasons to buy the Bambu A1 over the Cobra 3. C3 is faster, newer technology, takes up less room, and costs a lot less. The only people I see buying the A1 over this is Bambu fans and brand loyalists

i've seen a couple of these builds now my question is would it not be easier to have vat u can heat and melt all the the filiment/plastic rather then shread it

Innovation drives up the price, my guy. I don't mind the "repetition", as long as it works and is affordable right now. This could mean real competition. That, on its own, will bring up innovations.

Any fan, especially that loud being on 24/7 was a terrible decision.I saw another review the other day and the SV08 they bought has QA issues with the side metal frame pieces that screw into the bottom so sounds like it either slipping through QA or they were just trying to get orders out. You should homes6ask BIQU what it would take to work if am internal MQTT server on something like Home Assistant. The screen is great but the one downside is since it works over WiFi, probably using MQTT, they lag a little. I got an XTouch on my PS1 and works the same way so just something to know for anyone interested. I agree, the proprietary hot ends were a bad idea.I already know the Swiss3Dc Starlex DHB hotend will work but it's still preorder only. Unique system. With a CHR Bambu heatsink it will work with P1S/X1 using the DHB 24, 24mm of melting zone. They have different lengths, super suick nozzle change and can super dual ceramic heaters. Will work with any printer that has a heat since with uoword screw at the bottom, with an adapter for.precie length. 22, 24, 28, and 32mm were the options. The design is pretty ingenious IF it works as advertised. Downside is no preorder price listed yet. FYI, DFORCE trianglab has an 80W ceramic heater heater/thermistor for X1/1, so if this is JST it would work also. I hope it succeeds because places like DFORCE and Mellow makes a lot of custom parts for printers that sell.well, like the Endor 3(insert version here). With this being.opem source, would make it really easy for them to do so it's something you could upgrade over time if you don't have the money now, but will.down the line. Obviously it has to sell well for them to.makw.money doing so. I would LOVE to see you build a VZBot kit from Mellow 3D. The Goliath hot end is insane,, especially if you water cool it which is primarily for heat cream if I'm not mistaken. Might as well water cool the stepper motors also as they can get to 80C or above. It's basically a Voron on steroids created by the VZbot team which I believe is around 10 people. It's all open source so no kit needed but I've seen it so 2000ms/s and get over 80mm/s volumetric rate and 20000mm/s travel speed from corner to corner. All for the price of a X1 with AMS. Minus the 40 hour assembly and printing parts for it.

Its nice to see a company roll out a filament changer that has a filament dryer and is not so proprietary.

Sorry, that Makita sign was pretty bad. It was worse than the old MakerBot 2X iI used to have years ago.

I really love your channel but I have to say this seemed like you REALLY wanted to like this printer and made every excuse for it. Every time it did something bad. You blamed something other than the printer. Your room, or the filament or the rotation of the earth. I really think you should think twice about doing a review of a product in the same video that the manufacturer is sponsoring. It’s one thing to accept a free printer it’s another thing entirely to review it when they are sponsoring the video. Please keep your integrity and do better in the future.

This is the video I’ve been needing! I’m wondering if this is better than a bambu A1, and this vid has helped loads on forming my opinion