The extra bracket is for you to keep power steering canister in the factory location
@alexfranco90353 жыл бұрын
how would you use it, just looking in to everything i can before i start relocating everything haha
@Mammy427 Жыл бұрын
Just subscribed I'm doing a 2J GE/T build also I wanted the MCC intake but 3 months to get it sucks so I am now going with the Deepmotor after watching you I'm just getting the CNC Silver and Red one for $1000 trying to make 1500 hp but we will see , Going to be dope in my 84 Hurst Olds fuck a LS or BBC .Thanks Bad Ass video
@isaiahsainz10404 жыл бұрын
Thank goodness some videos on this intake, I wanna order it too for my build but haven’t decided fully on it yet
@garagetheory70434 жыл бұрын
hahah!! It's worth it. Quality product. I would purchase it again. The next video will showcase more of the entire motor complete, so you can see how it looks all together. Thanks for the comment.
@isaiahsainz10404 жыл бұрын
Garage Theory sweet! Can’t wait for more content!
@octagon_0093 жыл бұрын
Lol thats to block off the idle control underneath the manifold not the water neck!!! Good luck with the build.
@GetItAtWiLL4 жыл бұрын
I got to subscribe now, I'm doing a JZ GE build too and this is the intake I ordered. Glad to finally see it in someones project, loooks like decent quality, sucks they don't provide instructions because I dont plan to use the 1 inch "spacer" piece because I'm trying to make my engine clear a brake booster. I already don't think it will but I know it won't with that spacer. lol keep it up man
@Norvell074 жыл бұрын
How much it run you? Thinking about getting it myself
@GetItAtWiLL4 жыл бұрын
Norvell07 it’s $550 on eBay www.ebay.com/itm/401748352518
@Norvell074 жыл бұрын
@@GetItAtWiLL sold out...but thank you good sir
@GetItAtWiLL4 жыл бұрын
Norvell07 this one is another “name brand” I also had saved as a back up. It’s still in stock rn. I’m pretty sure they are the exact same manifold. www.ebay.com/itm/263842300517
@Donny_Tsunami2 жыл бұрын
i also got this manifold and it didn't come with that spacer, which i would've liked because i had to get a p/s relocation
@FightingSportsMedia4 жыл бұрын
The fuel rail is supposed to be installed before putting the manifold on the motor. Thats why those bolts were hard to get to.
@SofiaSclafani2 жыл бұрын
Even then, he still gonna run into problems tightening the fuel rail bolt as his problems is the plenum itself is preventing a tool to go in there to tighten the bolt.
@magadavixt4 жыл бұрын
Block off is probably for IACV
@garagetheory70434 жыл бұрын
magadavixt you’re right. I noticed after I shot the video. 👍🏽
@Sookigarage4 жыл бұрын
Isnt it amazing how a company can go through all the trouble of making the parts and not provide a single piece of installation instructions? I guess that is normal for chinese parts these days. Also, looks like you have 2JZ-GE air injection style injectors, which wont world on GT-E intakes. Air injection injectors have that large base on them.
@damnitdang2 жыл бұрын
No... it's normal for these damn usa company that sells these that don't care to provide instructions. Stop blaming the chinese... blame the Americans bro
@benitamanzanarez35204 жыл бұрын
Nice! How much was it?
@mexicointentfilms7257 ай бұрын
Link to the injectors that fit this manifold?
@towertsk2 жыл бұрын
How's the manifold performing? Which TPS did you go with? The stock TPS rotates in the opposite direction of the throttle body? Great video!
@Diabetic_Deity Жыл бұрын
I got this same intake manifold but I didn’t get the flange. I can’t even get my power steering pump without the reservoir into its bracket because this is in the way by literally an inch
@Abdulrahman_M2 жыл бұрын
Is the 66mm injector size recommend by the Deepmotor ad a standard size of injectors that injectors companies usually produce?
@sopropplegowo4 жыл бұрын
Are you able to use the stock denso style injectors for a GE motor with this? In other words, do stock injectors work on the rail provided.
@sopropplegowo4 жыл бұрын
Also are you required to run the IACV block off plate, or can you run without it and keep the idle air valve and bolt the mani straight onto the head?
@garagetheory70434 жыл бұрын
Nope. The o-ring is too small.
@garagetheory70434 жыл бұрын
@@sopropplegowo They give you a block off plate, so you have the option to run the IACV or not.
@sopropplegowo4 жыл бұрын
Garage Theory what injectors are you going to be running? I have a set of Rx-7 550cc injectors, they’re larger than stock but I’m guessing the tip is the same. Those won’t work?
@garagetheory70434 жыл бұрын
@@sopropplegowo Not sure if the RX7 will work. I will be running Fuel Injector Clinic fuelinjectorclinic.com/supra-2jz-gte
@peterfalken24982 жыл бұрын
Could I just do this without the turbo just have a better flow system?
@alexanderroque15902 жыл бұрын
I tried looking for this intake manifold with the 1 inch spacer but no luck they sell it without the spacer I was wondering if you could help me out with it!!
@tonyarbas2 жыл бұрын
What injectors can you use with this fuel rail? Or what did you use?
@transformer86hh4 жыл бұрын
2:58 that's what she said
@Sewnami4 жыл бұрын
Am i able to keep my stock ecu and harness if do a front facing tb?
@malikelgendy96783 жыл бұрын
Ecu u might need to relocate
@Sewnami3 жыл бұрын
@@malikelgendy9678 ah okay thanks boss
@kingdj35514 жыл бұрын
Can this go on a ge? I can’t afford a gte swap 😂
@garagetheory70434 жыл бұрын
TS Benjii yes.
@ElioRose4 жыл бұрын
That is a ge, I was looking at that same one today lol
@kingdj35514 жыл бұрын
Elio Rose which one were you looking to buy? Could you drop a link?
@T5_T-Rell3 жыл бұрын
@@kingdj3551 www.ebay.com/itm/Deepmotor-2JZ-GE-Billet-Intake-Manifold-Fuel-Rail-Throttle-Body/401748352518?hash=item5d8a115e06:g:k1IAAOSwrcle2EdQ same one in video