3.9 Perkins 4-cyl Final Assembly | Massey Ferguson 270 [EP4]

Рет қаралды 214,688

5 жыл бұрын

The 3.9 Perkins 4.236 is ready to go back in the Massey!
Subscribe: bit.ly/SubDeboss | Merch: debossgarage.com/merch
Watch more episodes of this build: debossgarage.com/build/massey...
Front timing cover, fuel pump, water pump, oil pump, balancer, oil pan, finishing this rebuild is just that simple!
Follow Deboss Garage:
Website debossgarage.com
Instagram / debossgarage
Twitter / debossgarage
Facebook / debossgarage
Send stuff to "DEBOSS GARAGE"
411 Darling Rd, Canfield, ON Canada N0A 1C0
Other links:
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I like: kit.com/debossgarage/dg-toolbox
Show us your build project: debossgarage.com/drivetribe
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About Deboss Garage:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 188

@DEBOSSGARAGE 5 жыл бұрын

We overhauled our entire merch store with fresh designs! teespring.com/stores/debossgarage

@SuperKoe 5 жыл бұрын

"Do you remember how to put everything together again?" Rich: "yes I do remember i have photographic memory...somebody told me once...I forget" Lol

@corywillbanks6348 5 жыл бұрын

Everyone has a photographic memory.....some just don’t have film. Lol

@kerrysupporter 8 ай бұрын

Now that’s a man that enjoys his work and does a great job

@myselfremade 5 жыл бұрын

On our farm we have a Massey 65 with the Perkins diesel. Has dripped oil from the rear main seal for over 40 years.

@taunuslunatic404 4 жыл бұрын

Time to replace it.

@kimchipig 5 жыл бұрын

I would just love a kitty in my shop, just like yours! Makes your day better for sure!

@marscruz 5 жыл бұрын

Always a thumbs up for Rich and the momma kitty. Keeping it real and true. Can't go wrong with that recipe. Thanks to Rich and Aaron the editor.

@oldsoul5263 5 жыл бұрын

I also draw a vague pattern kinda like what it came from on a piece of cardboard and punch the bolts into the drawing about where the bolts would go on the part. There's a few other tricks I use but that's the main one.

@ImpHalla66 5 жыл бұрын

Got my "Here We Go" t-shirt yesterday. Going to represent DEBOSS in the Seattle, WA area.

@ayitsyaboi 5 жыл бұрын

I picked one up when they first came out and someone immediately recognized it. Was pretty surprised until I remembered I'm surrounded by farmers.

@richiebledsoe1006 2 жыл бұрын

I had an injector pump fall off a loader at work while in use! That was fun

@rowan2128 5 жыл бұрын

That was pretty cool and informative!! Thanks rich!! The whole rebuild was some handy knowledge!!

@Arihus_Reyes1988 5 жыл бұрын

Nice rebuild, it's nice to see a Massey back to life. 👏💪😎

@35RSkyline 4 жыл бұрын

Good old massive Ferguson

@likeaboss882 5 жыл бұрын

i really enjoy these videos rich. I come away knowing more about a perkins diesel than i ever wanted to know! keep it up!

@davidclark4390 5 жыл бұрын

Hi Rich, You are one smart man. Love watching and wishing I had just some of the knowledge you have. Keep up the great work.

@southjerseysound7340 5 жыл бұрын

With Google and KZfaq you'd be amazed at what the average Joe can accomplish these days. Find some junk and take it down to bits. Another way to learn is by helping some friends make a mess out of their things lol. But the two most important things is to get past analysis paralysis. Matt @ Sloppy Mechanics has some great videos on dealing with this. Last but least is know when to ask for help when it comes to safety issues.

@JasonTaylor1 5 жыл бұрын

Music. Not all but a few tracks. 9:02 Cospe - Super 1 kzfaq.info/get/bejne/bLaXn8d-x53MZKM.html 10:45 Chill Coles - Urban Stories kzfaq.info/get/bejne/iqdyhZapxquzpZ8.html 13:56 Homebody - Watch kzfaq.info/get/bejne/q9WFn81mtq2qfGQ.html 13:01 Cat Meow

@LivingOnWheels 5 жыл бұрын

I don't know how you don't have more subscribers! Another great video as always.

@ALAPINO 5 жыл бұрын

I was going to sleep, but it can wait.

@privateparker5698 5 жыл бұрын

200,000k subs here we come

@southjerseysound7340 5 жыл бұрын

Its crazy how fast they grew but when I found the channel I knew it would.

@darrellbedford9925 5 жыл бұрын

Great easy rebuild. Good camera and audio work. Try doing it on your back with less than 2 feet of clearance. bearing torques were 295 ft-lbs plus 1/4 turn.

@DrewBe59635 5 жыл бұрын

Experience goes a long way to getting things bad the right way. You know, "Practice makes perfect ".

@twowheeler1000 5 жыл бұрын

I love these engine build videos, very informative

@BusHuxley 5 жыл бұрын

This is great editing. Thanks for the video and project.

@aldenamper9735 4 жыл бұрын

Thanks for video man!! You explained well and I enjoyed watching

@TonyLing 5 жыл бұрын

One of my favourite engines

@bahopik 5 жыл бұрын

Hey double a Ron, good job editing, like your style

@garywickliff9102 Жыл бұрын

One point on the injection pump, when you take off the front cover plate behind the injection pump to remove the three bolts it makes no difference if the engine turns. The pump will only go back on the gear one way. You are right to mark the pump housing before removing the pump.

@Ralphgmoney 5 жыл бұрын

The shop cat it awesome!

@coldstartdaily9738 5 жыл бұрын

Yo mate, love the channel, im a diesel head over here in England, i love your educational vids on cummins, youve taught me a great deal, i need a 6bt in my life !! Ive got a 2.5 turbo diesel in my transit over here in England , an old bosch ve pump that ive rebuilt and played with haha love the vids - didnt know these older cummins came with the cav rotary pump only really seen the 4bt with the massive inline pump lol

@sosoup 5 жыл бұрын

I put an engine back together that came to me in boxes . And yes it ran .

@Unbrellagun 5 жыл бұрын

So glad I found this channel

@johanneswarn5488 4 жыл бұрын

8:53 ”that’s the way she goes” Zipties n biasplies springs to mind lol

@djrand62 5 жыл бұрын

Hi from Clarksburg, ON. Love your videos.

@michaelratliff7775 3 жыл бұрын

I have one of those memory things to, my problem is figuring out what were talking about again! 😷

@stevefuller1779 5 жыл бұрын

I've been doing the job for 46 years and more, started when I was about 8, I just chuck all the bolts from the M/f tractors in a heap always seem to know where they go.

@volvobrynk 2 жыл бұрын

You should put one of these in a mini-truck, just to do something different. Or a 6.354, with a 4+brownie in a full size truck.

@robertweitlauf4653 4 жыл бұрын

The injection pump gear is captured will not jump a tooth. You can turn the engine over till the cows come home and the timing won't change

@Kneekapitate 5 жыл бұрын

If I had a dollar for every one of those I pulled out of a combine, I would have 100 bucks!!

@AntonioClaudioMichael 5 жыл бұрын

See you on the next installment

@adamboyce5 5 жыл бұрын

Nice Allied performance shirt xD

@prjndigo 5 жыл бұрын

Friend of mine made "engine rigs" out of plywood so he could put the bolts on the "engine rig" in labeled places around the sides, bottom and top. They're all "tool boxes" made of wood.

@canadacatalyst 5 жыл бұрын

Here we go!

@SpOOkyBubbleGum 5 жыл бұрын

Great video! always a pleasure watching you, entertaining and you learn something :) keep up the good work!

@gasperajdnik5627 3 жыл бұрын

Agreed 👍

@TheSmreeder 5 жыл бұрын

A little HOONIGANS Tribute there at the end , Thanks Rich Many blessings , SMR

@sterlingwilkey2124 5 жыл бұрын

Love your videos keep up the good work

@jamessmith7691 4 жыл бұрын

Good video. The cat inspecting the work.

@kodystclair9774 5 жыл бұрын

How good that stubby Milwaukee work

@speciosa146 5 жыл бұрын

Can't wait to hear this sweet thing run. Also, what was that round component bolted under the alternator at 14:21? Was it like a hydraulic pump or something?

@RobertLowery 5 жыл бұрын

Why didn't you use the bolts to hold the gasket in place when you installed the thermostat housing?

@bad_covfefe 5 жыл бұрын

A video on how to paint an engine would be awesome (in my opinion, anyway) if you ever have a chance to film one!

@DEBOSSGARAGE 5 жыл бұрын

We built a Cummins with the skid factory and I will paint that one. Should be out in a month or so

@josedelarosa5730 5 жыл бұрын

I congratulate you for your good videos you know I have a question I have a 2500, Dodge ram with the 6 bt engine and I had to change the gasket that came on one side because I was throwing oil and for that I had to remove the diesel pump but later to purge the lines does not want to tear or light me could you please help in any idea you have and thank you very much

@AntonioClaudioMichael 5 жыл бұрын

Great video deboss

@jmadden50 4 жыл бұрын

One of the best tips I ever got when I was young is to take a picture (old Polaroid) before disassembly to aid in reassembly. Now of course we have cell phones with great cameras. And I don't work on my own stuff anymore. I just watch you do it :)

@fbgm699killian7 5 жыл бұрын

New subscriber amazing channel keep up good work 👍🏻👍🏻

@michaelblacktree 5 жыл бұрын

The time-lapse music reminds me of the Made in Poland channel.

@davidwolff8903 3 жыл бұрын

Good for another 20,000 hours

@AaronNicoli 4 жыл бұрын

Hey, what do you do if your injection pump has been spun or taken off when the timing isn't at "TDC" etc.? Is it possible to turn the pump over and does it have an alignment marking of it's own shaft to it's own housing?

@NovaEclipse99 4 жыл бұрын

Be careful with that gasket tack stuff. I usually only use it on one side of the gasket/mating surface because I've had it actually rip paper gaskets while tightening stuff together before when used on both sides of the gasket.

@kevbjork1 5 жыл бұрын

I hope you will show installing the rear main seal. I have the same engines in my boat and need to change them out because they leak and would like to see if there is a trick to it. Thanks!

@DEBOSSGARAGE 5 жыл бұрын

The engine stand was in the way so I bolted it to the front section and then installed the rear main seal, clutch and flywheel when I removed the stand

@robertholladay9202 2 жыл бұрын

Great video very informant, I recently bought a Catterpillar 416, it has a 4.236 Perkins less than 1400 Hrs. it starts and sounds good, but I found water in the oil, so now it sits , I found out later it overheated in 2015, they replaced water pump but than it wasn't used much, it set for 7 years the oil pan froze and cracked, so in your expert opinion my question is where else could coolant be leaking from besides the head gasket? Because it started and sounded so good, but i won't start it anymore. Any help will be greatly appreciated, Thank you.

@Torsee 5 жыл бұрын

"Start all, before you tighten any".... Wise man say..

@lilsynx.official5908 5 жыл бұрын

U my friend got ur self a subscriber

@myselfremade 5 жыл бұрын

Almost all 4-cyl Diesels require a balance shaft, even if they do have weights on the crank. The vibrations would be insane anyways.

@gglovato 5 жыл бұрын

¿what is that thing below the alternator? At first I thought it was the starter but it has two lines and it looks geared to the timing gear train. Is it the fuel lifter or an air compressor?

@stevefuller1779 5 жыл бұрын

Not sure I agree that it matters about engine position when removing re-fitting the DPA pump, it turns at half crankshaft speed, same as the cam and is keyed to the gear, the is not enough cleanance in the timing case for the gear to jump so you can't get it wrong, I've removed and refitted hundreds without bothering to even check the engine position, never had a problem. Love the vids by the way even if you do blow up Detroits for fun.

@HJZ75driver 5 жыл бұрын

Allied Performance Projects 🤙

@RobertKohut 5 жыл бұрын

Nice!!

@Bob-jw1pc 4 жыл бұрын

I have an assortment of paint pens,,,, when there could be doubt, I dab a spot of paint on the bolt and a dab where they go,,,, diferent colour for every spot,,,, but most are obvious

@williammassaro6928 Жыл бұрын

I have a Perkins diesel 3.9 in my wood chipper, I believe it is a 1998 , my issue is it will run fine for a tree job, then we shut it down, and go to start it and it turns over but won't start , half hour or so later it starts, can you give advice on this

@wtfman5313 5 жыл бұрын

KITTY!

@memadmax69 5 жыл бұрын

Will it fit in my honda? Does it come with Vtec? ^.^

@prjndigo 5 жыл бұрын

or you could mark the injection pump gear and transfer gear with circles

@hp2084 4 жыл бұрын

Now that farmer will have to build the tractor around this engine. It all started with new tires.

@samiam7 5 жыл бұрын

Love this series. It's my favorite

@jasonargyropoulos2674 5 жыл бұрын

13:01 cat

@geraldgepes 5 жыл бұрын

That gasket tack looks like the bees knees after using permatex aviation gasket sealer for so long, I hate that stuff with a passion but man does it work well.

@adriaandeleeuw8339 2 жыл бұрын

from at least the late seventies the proper Perkins diesel approved Gasket Sealer was a product called Hylomar. I did my four year apprentice at a Perkins Distributor in Australia, Stripped down and rebuilt more Perkins Diesels than I can remember, we used to joke about rebuilding them in our sleep!

@geraldgepes 2 жыл бұрын

@@adriaandeleeuw8339 Hylomar is great stuff, I've used it a fair bit as well.

@blanchjones7691 4 жыл бұрын

How many times you have bolts left over

@augustogaleano4370 3 жыл бұрын

Cuantos hp tiene ese motor ? Yo lo tengo en un ursus 4514

@Braaap1997 4 жыл бұрын

Anyone know how well this engine would work in a 1500 truck?

@cyrusullmann9917 5 жыл бұрын

Deboss, do you have a 6bt Cummins rebuild playlist on your channel? Because I need to replace my head gasket on my 93 dodge.

@DEBOSSGARAGE 5 жыл бұрын

Yep kzfaq.info/get/bejne/pNhxf6lk1qzTXZc.html

@kaseymccleary946 5 жыл бұрын

Do you spray both sides of the gaskets with that spray-a-gaket? And is there a situation where you don't use anything on the gaskets? (how about with large "oring" type gaskets like the 6.0 powerstroke uses on the front and rear cover?) I'm self taught, and this is something I always ask myself when working on tractors and trucks.

@southjerseysound7340 5 жыл бұрын

You can but most guys use it to just hold things in place. If you want to do both sides they make the same stuff in a brush on form that makes less of a mess and is great if you've got a less than ideal sealing surface. Just be warned if you do both sides it is a B!tch to get the part off and you could easily break a big aluminum cover like that. So for this reason I only use it on both in RARE cases.

@adamsorell4851 3 жыл бұрын

is the turbo version the same as non turbo?

@jaysweet8126 3 жыл бұрын

Deboss I have a Massey leak y is my valve cover leaking fuel every were pleas help peg leg sed your the man

@lanceroark6386 5 жыл бұрын

Scarlet Begonia’s!!!

@alexquirozmelgarejo973 3 жыл бұрын

Podría decirme la tabla de torques

@blackflagqwerty 5 жыл бұрын

Ur cat made me thumbs up!

@collinonda9580 5 жыл бұрын

Speaking of which, what ever happened to the GTO? I binged all the videos but never got to see it painted!

@DEBOSSGARAGE 5 жыл бұрын

Collin Onda very soon...

@cmoutdoors3965 5 жыл бұрын

Could you get your hands on a Milwaukee 5400 lumen tower light and do a review?

@DEBOSSGARAGE 5 жыл бұрын

We have one and it will be coming out soon

@poogan1239 5 жыл бұрын

Can you do a video of your cleaning your shop? That table makes me cringe..lol

@muhammadikram5335 2 жыл бұрын

Can any body tell me is there any 4cylinder engine in 50 hp category for mf 240 tractor....

@lukethementalgent2676 5 жыл бұрын

It's comforting to see a seasoned professional use a somewhat cheap torque wrench instead of a 200€ Hazet (As a European, Snap-on(or off!) is not a thing.).

@adriaandeleeuw8339 2 жыл бұрын

In Australia when I was doing my Apprenticeship we used Warren and Brown Torque wrenches I have several and have had them for over 40 years, the largest is a one inch drive 1000 ft lb version. and yes I have used it to tighten down head bolts.

@Carstuff111 5 жыл бұрын

Like number 800, woot!!! :P

@autopro6015 5 жыл бұрын

I just heard myself explaining bolts and nuts lmao

@Xaevi 4 жыл бұрын

What's that song at 12:40?

@DragoljubRadovanovic 4 жыл бұрын

Extra !!!

@ve7yan 2 жыл бұрын

30-40 years of Canadian weather :) and salt

@randr10 5 жыл бұрын

I developed a system recently, because yes I'm that heretical Ford guy who actually works on his own stuff, that simplifies labeling of connectors. BTW, I'm pretty sure Honda is a worse culprit for the same connectors issue, but I digress. You label each side of the connection with some blue tape and a black sharpie with A-Z, then 1-infinity, BEFORE you disconnect it ("A" on one side, "A" on the other, then pull it apart). Makes it really easy to get them back together and isn't super time consuming. I used to label them using words about where they go, like "coil" or "throttle body", but that was really cumbersome because of space constraints and time-consuming because lots of letters. Labeling both sides with the same letter makes it just go back together like LEGOs and is quick and easy. No thinking required when you have high cognitive load.

@ramblerclassicman221 5 жыл бұрын

I had a dream I swapped a 3.9 Perkins with a 5 speed into a 1967 amc Rebel.

@rjt1789 5 жыл бұрын

Quick question, i know the common rail cummins’ have a tendency to ruin their injectors because they need an improved fuel filtration system over stock. Would it be a good idea to get one of those additional filtration systems? Or will that cause extra stress on the pump?

@therealtrucker7564 5 жыл бұрын

A lift pump will solve both those issues

@Mingledbones 5 жыл бұрын

GrandPrix LI a lift pump actually helps your fuel pump