3 Burton Step On Binding Mods To Customize Your Experience!

Рет қаралды 5,799

Күн бұрын

Three modifications you can make to your Burton Step On bindings to customize your steppy-on-ness!
Parts used:
Washers qty 4 per binding:
www.homedepot.com/p/Everbilt-...
Extended highback adjustment screws qty 2 per binding:
www.homedepot.com/p/10-32-x-1...

Пікірлер: 16

@Felix-kd8tn Жыл бұрын

I kick over my highbacks a lot as well, but there's one lift at my resort that will crush them if I forget them up. Also I totally am using your idea for more highback angle.

@borntobomb 11 ай бұрын

legit concern and a reason probably not to make that mod.

@oliverward5314 4 ай бұрын

just do your front foot

@XingX2 4 ай бұрын

Awesome mods! I was really disappointed with the limited highback angle adjustment on these bindings. Now I'm definitely going to give it a try. Thanks for the content! 😃

@dcd6115 Жыл бұрын

Hmmm. I disagree with securing the highback in the up position. I've never had any issues kicking the highback over in my Step-Ons. Also, I've ridden on plenty of old, low lifts where if you don't have the highback down when you get on, it could get crushed under the seat if you aren't paying attention. Additionally, locking the highback in the up position makes the board unwieldy when storing it. But removing them... now THAT is an interesting idea. I might just have to try that!

@thedoubtfultechnician8067 Жыл бұрын

Two things- one, how tall are you? I’m beginning to think the kicking over issue is exclusive to us short leggers. Second, and my bad for not demonstrating in the video more in depth, the highback still has a ton of flex if it gets caught. It’s just stiff enough not to get kicked over but it’s still got lots of spring to it.

@borntobomb 11 ай бұрын

@@thedoubtfultechnician8067 Im 6'2 , if I don't flip down on a few lifts, it would eventually break them...I just flip it down out of habit now, its clean and i can literally flip it back up with my back leg now when getting off.

@MrLTeaches Жыл бұрын

I ain't know a thing about a thing in this video, but I like hearin' you espouse your anecdotal wisdom 'bout it nonetheless.

@thedoubtfultechnician8067 Жыл бұрын

It’s basically skiing for aging hipsters

@leegriffin4501 7 ай бұрын

About to try #2 when mine come

@MrArcadyus 5 ай бұрын

instead of a hose clamp, I'd imagine paracord would work well and is much lighter.

@thebikeracer Жыл бұрын

Zip ties are probably freezing and breaking...

@thedoubtfultechnician8067 Жыл бұрын

It was 50° that day

@borntobomb 11 ай бұрын

possible? yes. More likely? ...the constant pressure on zipties is going to eventually wear down the integrity. Rider weight X somecrazyformularepresentingheel/toetransitionsperrun = snap. (I too am an engineer....and thats why this is the answer)

@mikerightgdgfolk4539 5 ай бұрын

They make stainless zip ties