*MERRY CHRISTMAS* I know a lot of people probably asked santa for a 124019 so be sure to do these 3 essential things to make sure you have a fun and action packed Christmas! A lot of my inspiration to make this video came from the original 144001 3 essential items which has proved to be really popular on the channel so if things aren't clear on this one be sure to revert back to the old one as these models are essentially the same just a longer wheelbase! Have a wonderful Christmas and I will be seeing you all in 2021 where we will have an amazing year of RC on the channel! Take care, stay safe and enjoy your RC goodies (If you were good!!) 😎❤🥰😍

Man.... I wish there was advice like this given on the 144001 back about a year and a half ago. It would have saved me a SHIT TON of grief and anxiety. I hated dealing with broken everything when the 144 1st came out and we did not have many replacement part suupliers, except for the LC racing parts cross reference, that didn't fit quite right back then. Funny how time changes everything!!! The helpful videos like this along with the fact that WL Toys started making essential replacement parts that were much needed to run these beasts of 144, 124 prefixes have MADE ALL THE DIFF'S MAN, THANK YOU!!! 👍‼️💯

Great video, loved it, at first the title had me a bit worried that I would be recommended to buy a bunch of stuff. I this was good maintenance love the adjustable steering angles as well, nice car.

Thank you so much for the tutorial! I will totally use it when i get mine

Stronger driveshafts would be a good upgrade. I keep bending the ones on the rear..

Still waiting for mine.. cant wait to see what you do to her!

Hi there, can you do a SLOWER VIDEO on how to take both ,Ft & REAR DIFF's as this is my first WLTOYS RC BUGGY Thank You so very much for your help.

My greed made me get this one too (bought the 144001 last month) now I can use this video as well. Cheers bro!

Should be getting mine in 2 weeks. Can’t wait! I will definitely check these things out since I’ll be using a 3s immediately. Merry Christmas 🎄🎁 ☃️

Got my eye on this one so thank you for the tips in advance!!!!

10:15 agreed the toe out on the stock 124019 or 144001 makes for 'lively' handling if you go brushless, toe in def needed for speed run stability.

Merry Christmas excellent intro video you know I got my 124019 at the house. I'll be following all your videos on this just like I did on the 144001 again my man merry Christmas ..

Thanks for the video. I just got mines. Will do this later.

Merry Christmas and thanks for the video!

Nice explained man, love the look of 124019 and that paintjob looks awesome. It's time to get it dirty 😸😸

Nice one Matey, can’t wait to get mine in January!!!

When adjusting camber and toe, you should use gauges so that both sides are the same. Also when adjusting toe and camber you should twist the centre of the rod instead of unscrewing the end link. One more thing to adjust would be the ride height. This car comes from the factory set at a very high ride height. This adjustment can be made via the shock collars. Good info though, great job. Keep it up

Merry Christmas buddy all the best.great video as usual

i need help im not sure how to charge it without breaking the batteries

Thanks for the vid. Merry Christmas

Where did you get that meddle tool fortune bolts i need it cause the plastic one sucks

For speed runs also take out the toe in on the rear wheels, simple job by removing the 2 screws holding the metal plate at the rear of the chassis. Then turn the 2 plastic inserts that are held in the metal plate, these plastic inserts have 2 holes in each insert that hold the A arms hinge pins. By turning the inserts it moves the hinge pines further inboard & setting the rear wheels straight with no toe in.

Looks cool

Love my 144001, will have to grab one of these 😊🤙🍻🇦🇺

good thank you

Also forgot to add the droop screws to lower the front end for those doing speed runs...

One of my front shocks was overfilled, it would have ended badly had I not noticed as it wouldn't compress more than about 5mm!

Im trying to do a brushless conversion on this, so I took the motor and mount out, heated up near the screws and ready to take apart, only issue is that the screw stripped. Not even that much force put into it, and the screw head completely shred

Getting a video out on Xmas day! Skillz

Funny thing is that in different video they say - Dont put too much grease intro diferentials 😅

i just ordered this rc car and it is my first but which screw driver can i get the best and where can i get shock oil and grease for cheap thx if anyone replies

Also what should the oil level be in all 4 shocks on the == 124019 Cheers mate

Great video just received mine through the post will start to strip her now 😀

A lot of screwing here :P Awesome content as always mate!

✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿3 essential things I do to wltoys. REDUCE REUSE & RECYCLE ♻️ 😂. Also never say” working correctly” next to each other. Many people will hear you say “work incorrectly”.

To much grease can sometimes be a problem friction and expansion. It's possible to over pack a cv joint blowing the boot. Just saying 👍

Can u plz do a video on how to take the diffs out?

Just ordered the 124017 brushless version….148$ American

Great video .👍👍

Would you recommend filling the diff with grease or would a good spray of lubricant would do the job on brushed?

Wont the sand / dirt just eat the diff away like a bike sprocket covered in to much oil? I’ve just got mine not used it yet but keep seeing everyone saying grease them.

When greasing the diff is that something that can be done at some point later on or should it only be done when we first get the 124019? Thanks

just had mine delivered, great fun with it! but is somehow stops automatically i believe is due to some over heating somewhere as when the car cools down it runs again. How can this be avoided or improved on?

Great stuff!! Thanks for walking us thru it, no doubt best 3 things to do first! Looking forward to what you do next with your 124019!! My silly trick for my dumb azz when it comes to the toe and camber, count the turns, remember which way I turned it, cause I can always turn it back, lol 😆

I'm having great trouble taking the shocks cap off. When using the pliers, do you place it on the black plastic part or on the metal cap to turn? I don't want to snap the black plastic if it's not supposed to be taken off that way. Even trying with the metal cap, it's really tight. Have tried holding base end with another set of pliers. Just want to know the exact technique and placement as it's my first time taking shocks apart and everyone doesn't show their first few attempt on the 124018/9.

I'm new to the hobby - just wondering if you guys ever get these metal parts kits. Does it help with durability??

Great info. Do you think the new brushless version coming out will require the same assistance?

When you link the cars to buy from Bangood are they from your prefered sellers because there are many selling the same cars. Do you have a history with buying from the people you link and is it safe to purchase from them? I have a bad history after buying things from China etc. Cheers.

Hey bud have you ever had problems stripping/snapping screws on these wltoys cars? Heard the “rckiwis” say they’re pretty fragile but the guys a monster so it might just be him

Hey I wonder can you help me.my friend and I are going to get this RC and mod them differently to see who can get the most out of there's but I think they're both on the same frequency do you know how I could change my frequency?

Awesome

What is the battery life with the car stock? Would it improve with a brushless conversion?

I’m new to using rc car controllers (flown rc planes for years) can somebody tell me please, is it normal to have a delay with the motor changing direction going from forward to reverse? Is this because of braking... maybe it won’t let me go straight from forward to reverse at speed to protect the gears?

-3:00 i dont think it need to unscrew? .. i mean why dont turn on the turnbuckle?

Can you use wheel bearing grease for the diffs?

What is the tooth count on the front & rear diffs. (Ring, & Pinion) also how tall are the tires?

Hi, new to this. What sort of oil would you have used for the shocks if it was needed? Thanks!

Can i use WD40 for grease??

Anything to do about the rear wheel toe in?

if you put off road tires on this would it be good off road?

Hello, how much oil should be in the shocks or what is the right amount?

can i use silicon grease for the diff gear...

Whats the lvl of CST that you suggest? bcoz as I can see, they have many options.

what oil would i need for those shocks?

What do you think about a mamba micro x upgrade?

Can you use the same phat bodies cover for the 144001 on the 124019?

Very nice review Mate like your Channel one more sub 😉👍🏽 keep it up and stay safe ✌️🏽 😊

What shock oil does the wltoys 124019 use 50 or 40 ? 👍👍👍

Good video on the car. The trap/crap music is horrible.

Got mine today. I have a clicking sound from the motor or diff when I just move it - is that normal?

Toe in and toe out. The former is good for a straight path.

What about the 104019

👍

Also try the lc racing ones

I call it the 12-40-19

Ive managed to do the shocks (fine out of the box) and the front and rear toe in (both badly out) but when I came to watch your section on greasing the diffs the video races through how you actually get to them. Having never done this before to any RC Im nervous. Is there anywhere I can see that bit at normal speed to make sure Im doing it step by step ?

seen a couple of other vids where to check the top deck as well as its 4 screws maybe loose, also check out the steering mod, its on John Robinsons site but ben.j.harris@gmail.com does a mod where it takes out all the steering slack on this and the 144001 as well. £8 is what it is from what i know.

십자 ㄱㅎ

Just buy a better RC car from a real brand. This is just cheap junk

Christmas 2056

So 3 things you need to do to a brand new car? Lol. You shouldn't have to do anything out of the box if it's brand new. Lol.

Gak bisa bahasa Inggris

No tienes ni idea. Para regular la caída de las ruedas no se necesita quitar ningún tornillo. Lo dicho. Ni p... idea.

1st step, don't buy it... 2nd step if you do... throw it away and get a real RC brand car like Traxxas, Team Associated, Team losi, HPI etc

Can you use silicone diff fluid in the diffs? Or are there no seals?