3 MORE Shop Storage Projects! Table Saw Cabinet, Plywood Rack, Drill Press Cabinet

Рет қаралды 180,259

3 жыл бұрын

Learn how to build three shop organization projects including a table saw cabinet, vertical plywood storage rack, and drill press cabinet. I built all three of these using scraps and they've added a ton of shop storage! // Thanks to Powermatic for sponsoring, learn more about their tools : bit.ly/powermaticcrafted #sponsored
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 Want access to SketchUp files for these projects? Become a member! : / @craftedworkshop
📦 Materials Used On The (affiliate):
🛥 TotalBoat Halycon Clear : amzn.to/2ziBSnN
🔹 Total Lock Casters : www.rockler.com/4-heavy-duty-...
24" Drawer Slides : amzn.to/3iu0qLT
2 ½" Pocket Screws : amzn.to/2PEcqxS
1 ¼" Pocket Screws : amzn.to/3a9PkZc
Drawer Pulls : amzn.to/3ikPX5h
Black HDPE : amzn.to/3ahfdqk
🛠 Tools Used On The (affiliate):
🔸 Powermatic 209HH Planer : bit.ly/209HH
🔸 Powermatic PM1500 Bandsaw : bit.ly/PM1500
🔸 Powermatic PM2244 Drum Sander : bit.ly/PowermaticPM2244
🔸 Powermatic Power Feeder : amzn.to/2ZFwZQd
♦️ JET Miter Saw : bit.ly/JETmitersaw
🔹 Rockler Corner Clamping Jig : www.rockler.com/clamp-it-corn...
🔹 Rockler Router Bit Center/Depth Gauge : www.rockler.com/rockler-route...
🔹 Rockler Crosscut Sled : www.rockler.com/tablesaw-cros...
Mike Farrington Double Taper Sanding Disc : bit.ly/DTdisc
Table Saw : amzn.to/2WrrNMm
Push Stick : amzn.to/2XIvgFq
Kreg Foreman Pocket Hole Machine : amzn.to/3ji7ts4
Router Table : • How to make a ROUTER T...
Calipers : amzn.to/3g02Hxd
Countersink Bit : amzn.to/2PGDqws
Magnetic Screw Holder (for my impact driver) : amzn.to/2xGYPwD
Arrow PT18G Brad Nailer : amzn.to/2DL9Jrx
Arrow PT23G Pin Nailer : amzn.to/3fLYDzH
Arrow GT300 Hot Glue Gun : amzn.to/2F43dNb
Pony Jorgensen Parallel Clamp : amzn.to/32xiQGB
Cordless Drill : amzn.to/2wOFM2S
Dado Stack : amzn.to/3fliYf6
Sjobergs Workbench : amzn.to/2s4mffP
Fix This Build That Table Saw Cabinet Video : • How to Build a Table S...
Jon Peters DIY Drawer Runners Video : • How to Fit Drawers - S...
👕 Get your Build It Yourself merch! bit.ly/BuildItYourselfMerch
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop

Пікірлер: 194

@josephboucher4654 3 жыл бұрын

If you wax the wooden draw runners and the draw sides and bottom, they'll run even smoother.

@bighammer3464 3 жыл бұрын

That plywood rack is both overbuilt and weak at the same time. Impressive

@craftedworkshop 3 жыл бұрын

Just as strong as it needs to be!

@patrickguest2762 3 жыл бұрын

was i the only one who thought the mitre saw blade looked transparent for a sec at 7:40

@littlebit8901 3 жыл бұрын

me too!

@h4mmy753 3 жыл бұрын

Yep haha! That's one shiny blade

@TheTranq 3 жыл бұрын

I did a triple take

@masonwilkins3238 3 жыл бұрын

I was really confused

@EddieSheffield 3 жыл бұрын

Likewise! I had to pause and single step the video to realize it was just really shiny!

@nightcloak3819 3 жыл бұрын

I was suffering a KZfaq drought, for new videos to watch, thankfully I refreshed at the right time

@craftedworkshop 3 жыл бұрын

Hah nice!

@andrewbrown8148 3 жыл бұрын

Exactly 3 of the projects that I've been looking to do. Thanks for the inspiration, Johnny~!

@generalsworkshop 5 ай бұрын

Great, I’m just about to make my own. Thanks for the ideas!

@jblewis1975 3 жыл бұрын

I really like how organized your shop is! And you're right, those drawer pulls with the recessed holes around them look sweet!

@alanmatthews9260 3 жыл бұрын

I’m jealous of all your amazing and expensive tools!

@woodworkerroyer8497 3 жыл бұрын

Yeah, even if most of them DO look like "harvest gold" from the 70s!

@CMRWoodworks 3 жыл бұрын

Definitely gonna build the drill press cabinet. Thanks for the idea!

@furthernorthfab 3 жыл бұрын

Totally want to go organize my shop now...

@kendraabatsis1449 3 жыл бұрын

Loved this video! Can't wait to try out these techniques someday.

@jrhandicrafts 3 жыл бұрын

Very organized workshop, detailed instruction , impressive video thanks for sharing .

@nordyfamily 3 жыл бұрын

Keep up the great work! I appreciate the time you have put in to making these videos.

@benzmansl65amg 3 жыл бұрын

Your shop is already everyone's dream. It just gets better and better. That kreg pocket hole machine is nuts! You have it all man. Thanks for sharing!

@craftedworkshop 3 жыл бұрын

Hah, thanks! I’m definitely loving it more and more with all of these improvements.

@drew657 3 жыл бұрын

That drill press cabinet came out awesome!

@twoasoner3602 3 жыл бұрын

Great video, thanks for posting!

@manuelruiz2444 3 жыл бұрын

I JUST wish I had a small decent shop....LOOKS beautiful and I would REALLY enjoy this

@rkerby6375 3 жыл бұрын

Great shop builds!

@wb_finewoodworking 3 жыл бұрын

I need a similar cabinet for my SawStop ICS. You just inspired me to get busy and design one. Thanks.

@craftedworkshop 3 жыл бұрын

Glad I could help!

@Luqman899 3 жыл бұрын

watching this video made me realize how much work and effort you put into this channel and your content.. well done.

@timoerkens4184 3 жыл бұрын

Looks like you have whole sheets of plywood laying around as scraps haha

@craftedworkshop 3 жыл бұрын

The full sheets are for future builds, I built all of this stuff from much less than full sheets.

@timoerkens4184 3 жыл бұрын

@@craftedworkshop awesome to have so much wood in the shop in these strange times!👍

@woodworkerroyer8497 3 жыл бұрын

@@timoerkens4184 it's nice to have in ANY TIME!

@craftedworkshop 3 жыл бұрын

Yea I try to stock up early so I don’t have to make a ton of trips. Definitely a weird time for woodworking!

@SyteCYer78 3 жыл бұрын

That was my thought too! Nearly whole sheets going through the saw as "scraps" to start the under-saw box. Lol

@emma-eventing 3 жыл бұрын

lol even your "side projects" come out looking refined and crafted AF

@craftedworkshop 3 жыл бұрын

Hah I just can’t help it 😂

@mclkev 3 жыл бұрын

Great org projects, really liked your narration info

@ilijamilenkovic8120 3 жыл бұрын

Great video! Nice done project!

@thebobloblawshow8832 Жыл бұрын

Great builds.

@busyhandsph6836 3 жыл бұрын

This is a complete package --- content, video, audio, editing, and of course, awesome ideas. Love you work man! Keep it up!

@craftedworkshop 3 жыл бұрын

Thanks a lot!

@LogHouseFarm 3 жыл бұрын

It is not the prettiest of the three, but I really like the plywood rack - I am going to need something like that fairly soon!

@craftedworkshop 3 жыл бұрын

Yup definitely nothing fancy but does the job!

@littlebit8901 3 жыл бұрын

Very nice indeed!

@FredMcIntyre 3 жыл бұрын

Turned out great Johnny, awesome job! 😃👍🏻👊🏻

@craftedworkshop 3 жыл бұрын

Thanks Fred!

@MCsCreations 3 жыл бұрын

Really fantastic work, dude! Well done! 😃 I really can't wait to start making projects like those for my shop! 😂 Anyway, stay safe there with your family! 🖖😊

@daverobinson6384 3 жыл бұрын

Your scrap plywood would be gold for me!!

@keralaarchitecture2165 3 жыл бұрын

nice presentation & editing,😊😊

@reforzar 3 жыл бұрын

Those fast motion pocket hole drill is hilarious.

@timhalcomb4041 3 жыл бұрын

Enjoyed the video for taking the time to share you have a blessed day

@craftedworkshop 3 жыл бұрын

Thanks!

@timkozak6106 3 жыл бұрын

Love the video. You need to make a shirt that says " I think I'll use this technique again in the future " Thanks, always enjoy your videos

@ITDteacher01 3 жыл бұрын

I like the projects well done, I like how you call them DIY drawer runners, that’s how we use to build all our draws before drawer runners were invented, we use to put a small strip of hardwood on the drawer and the runner to increase the life as they to rub and wear over time. I know others have mentioned paste wax and you put it on, but I have found it can attract dust sometimes and makes them wear faster.

@noahscofield 3 жыл бұрын

Nice to see you getting more organized! I definitely need to do more projects like this one! Keep it up man

@craftedworkshop 3 жыл бұрын

Thanks Noah!

@robertbutler8004 Жыл бұрын

Noah Scofield that is what my sister-in-law said to me last night!!!

@JenkinsB 3 жыл бұрын

Scroungers Paradise for baltic birch!!!!!!!!!!!!!!!!!!!!! (i'm sure you already know that though...)

@jostaxx5640 3 жыл бұрын

That miter saw is pretty as hell

@MD-en3zm Жыл бұрын

One tip I learned from Matthias Wandel - when you use wooden drawer runners, use hardwood or even a very thin layer of hardwood at the interface. It slides much more smoothly than plywood or softwood (and obviously the direction of motion should be in the direction of the grain). I just built a bunch of drawers for my assembly table and made my own runners out of maple scraps. To make the drawers slide more smoothly, I added some iron on birch edge banding on the bottoms (one strip on each side) - and it made a big difference in how smoothly the drawers slide.

@generalsworkshop 5 ай бұрын

Great ideas.

@c4pnk1rk 3 жыл бұрын

I like how you mention the power feeder like it's an everyday shop item, but call the pocket hole machine a luxury item =P

@Yoursoul101 3 жыл бұрын

The pocket hole machine is a luxury. You go from something that costs 40 or 50 bucks when used with a power drill to about 500 just so you don't have to use a power drill. Pretty stupid tool unless you work on wood all day.

@scottallen606 3 жыл бұрын

Whoa that sanding disc!!! Great work, also just listened to the Made For Profit podcast you did. Great info and insights!!

@davidfutcher9609 Жыл бұрын

Nice. A little jealous, you have all the toys.

@SchysCraftCo. 3 жыл бұрын

Awesome shop storage 💡

@craftedworkshop 3 жыл бұрын

Thanks!

@SchysCraftCo. 3 жыл бұрын

Crafted Workshop ur very welcome my friend make on

@mRowden100 3 жыл бұрын

Your shop furniture is far nicer than my 'nice' furniture would ever be. Great work!

@craftedworkshop 3 жыл бұрын

Thanks!

@genofromrenoprospector6940 2 жыл бұрын

Dang, you have one heck of a shop. Ran into your channel and have watched several of your videos which are awesome so I had to subscribe to your channel. Very informative and some great projects that I can start to improve my shop. Thanks a bunch for sharing. 🇺🇸👍😎⚒

@mitzibud6908 3 жыл бұрын

Lovely!!

@craftedworkshop 3 жыл бұрын

Thanks!

@tariqbojic7632 3 жыл бұрын

Man that miter saw blade is trippy! 👀👀🤔👀

@Yusufmasron 3 жыл бұрын

Hey Johnny, well done with the jump u did with Seth!

@robertsmithUH60driver 3 жыл бұрын

You should invest in the manufacture of the pocket screws if not already. I love pocket screws also. Cool stuff.

@williequinlan4946 3 жыл бұрын

Thank You 👍✅

@JL-vt5uo 3 жыл бұрын

Im not handy at all (didn't learn anything as a kid or teenager, no handy person role model) but @CraftedWorkshop actually makes me want to try and LEARN to do some of it myself. I don't know how but you make this seem approachable for a complete ignoramus like myself.

@craftedworkshop 3 жыл бұрын

You should, it’s so fun and easy to learn by watching videos (that’s how I learned)!

@cady.moriarty 3 жыл бұрын

Shop is looking great JB! Keep it up, can't wait to see what's next, shop builds or otherwise! #bringbackthesquat ✌️

@craftedworkshop 3 жыл бұрын

Hah, thanks!

@danconlan8735 3 жыл бұрын

Great job Johnny! Did I miss the explanation on the boot? Thanks, DC

@mommy_milkers703 3 жыл бұрын

ooooo looks nice

@craftedworkshop 3 жыл бұрын

Thanks!

@ryderscustomcreations3665 3 жыл бұрын

That sanding disk has been on my wishlist for awhile... I got a couple other things that I think are a bit less of a luxury that I need first, but I definitely will be getting it someday soon.

@craftedworkshop 3 жыл бұрын

It’s really cool!

@TrentonSpears 3 жыл бұрын

Could you link the magnetic bit/screw holder that’s on your impact driver?

@backwoodsbaby92091 3 жыл бұрын

I love your videos! Trying to get my husband to learn a thing or two lol. Hope the earthquake this morning didn't rock your place too much!

@HarryLovesRuth 3 жыл бұрын

That's exactly what I thought of when he commented about attaching the plywood rack.

@craftedworkshop 3 жыл бұрын

Thanks! We didn’t even feel it.

@backwoodsbaby92091 3 жыл бұрын

@@craftedworkshop We didn't either, I'm in Greensboro, so I don't think I was close enough.

@backwoodsbaby92091 3 жыл бұрын

@@HarryLovesRuth that's what reminded me lol

@ashilling9283 3 жыл бұрын

Love the cabinet for the drill press-the recessed drawer pulls, the wooden slides, ambrosia maple! Wanted to double check that the link for the counter sink bit is correct because the bit set that it is linked to doesn't look like the bit you had. Thanks, Johnny! Are you going to tell the story about your foot someday? I first noticed it when you were building the shed. What the heck happened? Hope it is healing up nicely.

@craftedworkshop 3 жыл бұрын

Thanks! Here’s the link to that specific bit : amzn.to/2PGDqws As far as my foot, I dropped a sheet of plywood on my big toe while building my garage workbench and broke it 😫 Had to wear the boot for six weeks. I talked about it briefly in that garage workbench video.

@casycasy5199 3 жыл бұрын

use hip for the draw slide next time thats what i use and the draws slide great

@dofidopes7080 3 жыл бұрын

I love your video

@goldfamily6852 3 жыл бұрын

I thought if i have table saw, miter saw, bandsaw, drill, router, nailers and impact, my shop is complete. But after seeing your power tools, it makes me wanna quit woodworking. Lol!

@MrFadboy 3 жыл бұрын

man i would love a shop this big, i have to shove my tablesaw underneath my workbench to be able to walk around my ''shop'' lol

@judas587 3 жыл бұрын

I just love this man . I would work for him for NO MONEY AT ALL . JUST TO LEARN HOW HE DOES HIS PROJECTS

@TheTranq 3 жыл бұрын

Nice builds. What are the countersink bits you use with the large collars?

@gpzjeffrey7974 3 жыл бұрын

Proper glued joints are always stronger than screws. The screws didn't hurt, but weren't necessary.

@JonasTraber 3 жыл бұрын

I was thinking of making a table saw cabinet too. I have a lot of wasted space under it. Mine will hold my dedicated dust collector though, so much less drawers.

@craigbainum4967 3 жыл бұрын

Another great video--thanks. Have you done a review of your Jet miter saw? I'd like to see one. Also wondering if you got it from Powermatic or if you purchased it.

@rogervatalaro6759 3 жыл бұрын

What blade do you use on the Jet miter saw? It looks invisible

@kelvingstrachan 3 жыл бұрын

Good job mate. I would rip those drawer pulls out with my shins, daily.

@ChestnutRidgeWorkshop 3 жыл бұрын

After some use are you still liking the wood shop made drawer slides? I'm planning some for a basement storage unit, so wondering how yours are behaving. Thanks!

@craftedworkshop 3 жыл бұрын

They’re working great!

@MrGwdvideo 3 жыл бұрын

What is that bit holder you have on top of your impact driver - have not seen anything like that and it looks handy as hell -thanks

@dgramsz2146 3 жыл бұрын

Curious about the sawstop and the sanding disc. Did you have to run the SS in bypass mode to use the sanding disc?

@rocoph7846 3 жыл бұрын

Wood glue works wonders,as do pre drilling holes to prevent splitting...lol

@K0NVICTx 3 жыл бұрын

That miter saw blade looks clear ha

@craftedworkshop 3 жыл бұрын

Hah, it’s super shiny!

@MegaSpender 3 жыл бұрын

Btw that countersink your using, is not reaaly for wood its a steel/copper countersink etc. We use that type at work. I mean yeah they work on wood but you can get alot better 👍

@SteifWood 3 жыл бұрын

I like the sheet storage unit ,,, maybe not so much how it looks, but I understand u used the scraps u had at hand and it's functional ,,, I'm the same with my shop trashy stuff :haha

@craftedworkshop 3 жыл бұрын

Hah yea not going for beauty on that one 😂

@brianthompson1971 3 жыл бұрын

What saw blade are you using on your miter saw?

@zacharyadam-macewen8723 3 жыл бұрын

I've been binging on these videos lately and its inspired me to (over)build my next desk/light worktable using some of your tricks! Let me ask: should a pocket-screwed joint also be glued or is that overkill?

@woodworkerroyer8497 3 жыл бұрын

Only if you never want to take it apart. It doesnt hurt, but if you do screws every 6" or less, you shouldn't have ANY trouble with putting most things on the shelves, but that depends on what you are putting on the shelves. With heavy stuff (like scrap wood or mechanics tools) I'd use pocket screws, but also add a 2x2 reinforcement under each side and back of the shelf to hold more weight as the pocket screws really dont have much wood to support them compared to mortise and tenon or even dowel construction.

@zacharyadam-macewen8723 3 жыл бұрын

@@woodworkerroyer8497 Thanks for the advice. The reinforcement/runner idea sounds good to me. It would be nice to at least partly disassemble this thing to move it.

@craftedworkshop 3 жыл бұрын

Yup, totally agree. Glue isn’t typically necessary and allows things to be modified easily down the road.

@shopcatt643 3 жыл бұрын

I enjoy your videos, this one is not an exception, it would be awesome if you could edit out the clutch noise from the impact drill. Not going to stop me fro. Watching but would be more enjoyable.

@MrBaza70 3 жыл бұрын

Looks like you've got an add-on piece on your impact driver for magnetically holding bits and screws. What is that? It looks great and super useful! I want one. :-)

@Flintstones22 3 жыл бұрын

What kind of blade is on the miter saw? Looks like a mirror blade? I can see reflections from the blade.

@countrysideworkshop 3 жыл бұрын

Do you have plans for the tablesaw cabinet?

@joedance14 3 жыл бұрын

That is some really nice work. One question: why is it that no one seems to finish the interior of a shop cabinet? Seriously, is there a reason? Will the interior surfaces not react to humidity? Or are they sufficiently protected by the carcass of the cabinet?

@Sfyre 3 жыл бұрын

The counter sink bit link doesn't look like the one in your video, yours looks like a different design than a usual bit and it's gold versus the Irwin ones you linked. But excellent vid! I miss when all the makers crews did shop project builds. It's too bad the stigma came out that "that was all you guys built" add I really miss these and the motivation that came with it! :-) nicely done Johnny!

@craftedworkshop 3 жыл бұрын

Here’s the correct bit! amzn.to/2PGDqws

@awesomearizona-dino 3 жыл бұрын

I am always amazed at how much wood it takes to match strength of steel.

@woodworkerroyer8497 3 жыл бұрын

I like the ideas and the video. The one thing I would change is the brand of screw you are using. Spax screws are WAY better than any other screws I've ever used and I have only split TINY pieces or super brittle smaller pieces with them. 2x material and plywood is TOTALLY safe. Also, their design allows for pilot hole less use which saves time and effort. With the possible exception of GRK, spax is the only screw I know of that will go into a white wood 1x2 without a pilot hole and not split it, most of the time. Again, not sure what you are using but buy a box of Spax and I bet you will find them much simpler to use. I know this sounds like a shilly post, but I AM NOT sponsored or affiliated with Spax in any way. I just love their products and see that you are having trouble with something their screws minimize or eliminate altogether.

@woodworkerroyer8497 3 жыл бұрын

The other part about Spax that sets them apart from most other companies is that they make Torx headed screws which dont strip out unless the user (me, and you) have the bit at an odd angle or not set all the way into the head. They also hold onto the bit better than any Phillips I've ever seen.

@craftedworkshop 3 жыл бұрын

Oh yea, I love Spax screws and use them all the time. I have pretty much zero Philips screws in my shop, they’re all either Robertson or Torx. Some of this plywood was crappy construction grade stuff so it splits easy, hence the pre-drilling.

@workshop_ahmed_ben 3 жыл бұрын

Chinne ورشة المحترف workshop Good luck

@xxJETSETxx 3 жыл бұрын

What do you mean when you say 3/4 inch plywood isn't 3/4" thick? What size is it? Is all wood like this? How do you account for this if so??

@charlesjackson1588 3 жыл бұрын

23/32

@bs838 3 жыл бұрын

Two questions: 1) is it just me or does the blade on your miter saw have a mirrored finish? That's cool, never seen it before. 2) Do you glue any of the pocket holed joints in the cabinet? Or do you glue shop furniture in general? I always glue shop furniture made with pocket holes but I wonder if it would hold up just the same without glue, and be much easier to take apart and salvage when the inevitable re-design happens!

@craftedworkshop 3 жыл бұрын

Yup, the blade has a polished finish! And nope, I haven’t been adding glue to cabinets with pocket holes for awhile and everything has held up super well.

@keralaarchitecture2165 3 жыл бұрын

superrr

@kingstonbespoke 3 жыл бұрын

Hey dude! What’s the bit holder you have attached to your impact driver around the back of the main body?

@woodworkerroyer8497 3 жыл бұрын

Its a magnetic bit/screw holder. He has a link in the description if you want one.

@kingstonbespoke 3 жыл бұрын

woodworker Royer thanks my MAN!!!

@chrisbrandt776 3 жыл бұрын

Where did u get ur tape measure holder

@jimw544 3 жыл бұрын

At 5:55 there is a drill bit on top on the drawer box that I believe is use to drill a pilot hole and counter sink in a single pass. Where can I find this?

@may311975 3 жыл бұрын

Not 100% positive, but Looks like: Amana Tool - 55228 Carbide Tipped 82° Countersink with Adjustable Depth Stop & No-