330 stabilizer for beaver trapping.
Рет қаралды 6,887
Күн бұрын
@georgezink8256 9 ай бұрын
Isn’t it great how many of us come up with our own ideas of what’s needed
@lancepullano1146 2 жыл бұрын
Keep up the good work. By the way those hammers you made are awesome. Thanks for the fast work and shipping.
@thehammerstraplineproducts 2 жыл бұрын
Thanks Man! I’m glad you like them! You are most welcome!
@sesoutdoors4967 2 жыл бұрын
Trapping out of state always looking for lighter and easier thanks for the tip.
@thehammerstraplineproducts 2 жыл бұрын
Thank you!
@BoysInTheWoodsofPA Жыл бұрын
Thanks for another great gear video Gary, I just made one of these out some old silo ring steel. I have a pile of it here, it's a little crooked but they are solid for sure. Thanks again!.
@thehammerstraplineproducts Жыл бұрын
No problem!!!
@BoysInTheWoodsofPA Жыл бұрын
@@thehammerstraplineproducts I set two 330s yesterday with these yesterday. Each one had a beaver in it this morning. Thanks again!!
@thehammerstraplineproducts Жыл бұрын
@@BoysInTheWoodsofPA they work great imo! Great job on the beavers!
@rickgrommersch7318 6 ай бұрын
Nice Job!!!
@scottjohnston1272 4 ай бұрын
Nice job
@MarkJLarsonOutdoors 2 жыл бұрын
Looks awesome brother you should really think about selling those! Great job!!
@thehammerstraplineproducts 2 жыл бұрын
Thanks! I may just add em to my list of products haha!
@bobn7525 2 ай бұрын
great idea
@huntnfishnuts5880 2 жыл бұрын
I like that set up, might do some for 150s for muskrat.
@hillbillytrapperwestvirgin2722 2 жыл бұрын
Those look great. Nice video
@jamesdarrow4675 Жыл бұрын
Thanks for the information as to how to make them
@WildAboutBeingOutdoors 2 жыл бұрын
I like that idea Hammer. I would Try and get a patent number on that never seen anything like that. I'm going to get you to make 2 of them for me
@thehammerstraplineproducts 2 жыл бұрын
You got it buddy!
@LiveMoreOutdoors 2 жыл бұрын
Simple and effective!
@thehammerstraplineproducts 2 жыл бұрын
Very simple indeed!
@etiennescarbinski7890 Жыл бұрын
Slick
@judithdandavis2206 2 жыл бұрын
heck of an idea .
@thehammerstraplineproducts 2 жыл бұрын
Thanks Dan!
@JR-3030 Жыл бұрын
Ever issues with them taking the set up for a swim? My worry is a rear caught otter, suppose they'd eventually get caught up as that stabilizer would probably act as a drag.
@thehammerstraplineproducts Жыл бұрын
I run my cable from my trap through the D ring and to my stake so stabilizer is always attached to trap and anchor.
@davidayotte9697 2 жыл бұрын
Cool idea
@peterkula6612 8 ай бұрын
do you sell them?
@user-jd4mf5ep1u Жыл бұрын
Усики у капкана сколько миллиметров в диаметре?
@swimmer537 Жыл бұрын
Does this work on all the trap dog settings or do you have different stands for different dog settings
@thehammerstraplineproducts Жыл бұрын
It works on all of the settings all you would do is either bend the jaw holders which are the 1/4” rods up or down to hold your jaws for the setting you like. If you’d like I can do a video on how to adjust these for different settings or for diff makes and models of 330s.
@swimmer537 Жыл бұрын
I gotcha. So that 1/4 inch rod is flexible enough to do that in the field. Did you use regular steel rod for something softer?
@thehammerstraplineproducts Жыл бұрын
@@swimmer537 just normal 1018 hot rolled steel. I use pliers or the box end of a 10mm wrench I normally have in my pocket to adjust my pan tension bolts.
@nickkerezovich289 2 жыл бұрын
How long did you cut the quarter inch ?
@thehammerstraplineproducts 2 жыл бұрын
4in
@bryannewman2546 2 жыл бұрын
You have a website I’ve tried looking but can’t find anything?
@thehammerstraplineproducts 2 жыл бұрын
My website is not finished yet you can contact me at thehammerstraplineproducts@gmail.com
@kevinkerr2876 2 жыл бұрын
Hammer,, great stand,, your fabrication is bar none,, I think you could stay pretty damn busy in the fabrication end of the trapping industry,, just sayn!!
@thehammerstraplineproducts 2 жыл бұрын
Thanks Man appreciate that!