335D 8 SPEED SWAP PT.2

Рет қаралды 13,281

Күн бұрын

In this video, we wrap up with the 8 speed install by finishing the wiring harness, installing the transmission, and going on a test drive. If you haven't seen part 1, go a head and watch it in the link below. If you are interested in having this work done, please reach out to me via email: DDErepair@gmail.com
Part 1: • 335D 8 SPEED SWAP PT.1
Thanks for watching, like and subscribe to help this channel grow!

Пікірлер: 63

@jamesogara2219 4 ай бұрын

Super cool and no way am i attempting that without your help!

@bradtourt 3 ай бұрын

Hahaha, yes it's a lot of work. But when you are ready, you know where I am (:

@Credman1883 4 ай бұрын

Great video guys

@shano81 4 ай бұрын

awesome :) thanks for filming this process. I love m57 bmw's so much!

@bradtourt 4 ай бұрын

No problem at all!

@MotionAutoTv 3 ай бұрын

Nice video!

@bradtourt 3 ай бұрын

Thank you!

@lolish1234 4 ай бұрын

Nice exhaust note for a diesel!

@BrokeMahWallet 3 ай бұрын

Gotta love the 8hp swapppp

@bradtourt 3 ай бұрын

They are great

@fenoghencazy4641 5 күн бұрын

Very nice job, can u do a similar post for the E70, thanks

@bunyamin774 3 ай бұрын

awsome videos keep it up

@bradtourt 3 ай бұрын

Thank you sir!

@foolyou7633 4 ай бұрын

Keep the videos coming my friend! Been waiting for these. About as close to a B. Tourt University as you gonna let me get! I'll try again next semester. Ahhahaha!!💪💪💪

@bradtourt 4 ай бұрын

Thanks so much! Will be putting more content out here

@rastawicc01 Ай бұрын

Hi Brad, thank you for these helpful videos! May ask the part numbers of the green connectorhousings (male&female) on your custom harness please? Greatings from Europe!

@mikkinikki1902 3 ай бұрын

silicone spray on door gaskets help with wind noise at 140mph

@t16incho 2 ай бұрын

Great content, camera focus has lot of room to improvement XD

@jasonshields1056 Ай бұрын

Great video! Very well documented. Do you know of a AWD 8 speed transmission option for the e60 with the N54?

@bradtourt Ай бұрын

It would be the same transmission but just an xdrive. 8hp70x or 8hp75x

@Armanis_ Ай бұрын

Do you guys sell the wiring harness ? I need one for my E61 LCI, with SATA gear shifter, and I wanna put in 8HP not sure if F series of G series one, but for sure I will be using CAN TCU, but my car has sports button right next to the shifter so I would like to integrate it all and make it all work like factory

@radomirstanisic3445 4 ай бұрын

Professionals, making it look easy. I plan on doing this to my E60 535d as the 6hp26 isn't doing it justice, how do you like the CANTCU vs the Turbo Lamik controller?

@bradtourt 4 ай бұрын

Both are great controllers, however CanTCU is more plug and play and way better for street driving. Turbolamik, you can customize everything and change your map. This was over my head when I did my first 8 speed swap. Now I just use CanTCU.

@radomirstanisic3445 4 ай бұрын

@@bradtourt thanks for the reply!

@silvestyruzunov8503 4 ай бұрын

Is it any different in e91 330xd 231hp model? I am considering 8hp70x + CanTCU Thanks a lot for the video.

@bradtourt 4 ай бұрын

Same

@Wh0_Me_B58 13 күн бұрын

I want to swap g80 transmission into my f30 340i. Can it be done and would you do it for me ?

@dr.mattpavlic305 4 ай бұрын

Is the new shifter just to complete the look, or necessary for the swap to work correctly? Just curious if the old one could be kept to keep it totally under the radar :)

@bradtourt 4 ай бұрын

The old shifter will not work. However, you can use a e90 dct shifter that fits perfectly.

@karlpuuraid7304 3 ай бұрын

Nice video! Good tips.. what about setting up the cantcu and removing immo from 8hp😅

@bradtourt 3 ай бұрын

Yeah no problem, I can make a video on this

@karlpuuraid7304 3 ай бұрын

I had one problem.. did you remove the thead with 10mm drill? The starter bolts used to be 10 and the thread in pmc adapter is 8mm.. if i used 8mm bolts the starter moves!? And 2x 8mm bolts with 8.8 rating.. enought to hold the starter?

@bradtourt 3 ай бұрын

@@karlpuuraid7304 yeah it's sufficient

@yetzbiker4995 Ай бұрын

hey! i wanna prepare myself to zf8 swap my future 535d, do you think i can keep the original transmission shaft and differential or i need to find a new shaft?

@bradtourt Ай бұрын

You should be able to use the original shaft

@pos335i 3 ай бұрын

I’m curious how that holds power. Also can you still run xhp ?

@bradtourt 3 ай бұрын

It's stronger than the 6hp and yes you can

@valentinlukanov2358 4 ай бұрын

Hi mate what about the transmission bracket is it original e90 or different one?

@bradtourt 4 ай бұрын

It's original

@valentinlukanov2358 4 ай бұрын

Do you know are they the same as e60 5 series

@bradtourt 4 ай бұрын

@@valentinlukanov2358 I doubt it

@neilskruse3737 3 ай бұрын

I swapped the trans bracket from the old 6HP. Four bolts

@martinigamer 4 ай бұрын

Show us how it shifts!

@bradtourt 3 ай бұрын

It shifts great, there is another video that shows the shifts better.

@martinigamer 3 ай бұрын

@@bradtourt which one do you mean? I looked both videos from you

@alfamarco4845 4 ай бұрын

What did this swap cost and what was your labor?

@bradtourt 4 ай бұрын

Labor is $2500 and for the transmission, controller, and all the little stuff, it's around $5,000

@alfamarco4845 4 ай бұрын

@@bradtourt Same for a 135i? Obviously different adapters

@bradtourt 4 ай бұрын

@@alfamarco4845 yes, same

@LeeWinkler 4 ай бұрын

Brad... Little confused.... JR 3.1 is stock turbos? Apparently I'm missing something.... Now all of my info is very old because I did my upgrades about the time we found out we needed an r90...

@bradtourt 4 ай бұрын

Yes. Stage 4 is hybrids

@LeeWinkler 4 ай бұрын

@@bradtourt then they change the numbering scheme in the years that I wasn't paying attention. Thank you sir

@bradtourt 4 ай бұрын

@@LeeWinkler stage 2.8 is stock turbo and fuel system, stage 3.1 is stock turbo with an r90, and stage 4.1 is r90 and hybrids. Nothing has changed.

@LeeWinkler 4 ай бұрын

@@bradtourt I'm not 100% positive as it yas been many years ago now... But I'm decently sure when I did my hybrids and tune it was 3.0. At that time 2.8 didn't exist.... He had 2.5 as his top for stock turbos. I'll have to ask Mark F to see if he remembers it the way I do .... Though it makes absolutely no difference ... Just curious . Thanks for the clarification

@LeeWinkler 4 ай бұрын

@@bradtourt I talked to Mark F (another OG from the e90post days). He confirmed, Im not crazy :D When JR/AArod first came out with the Hybrid/tune...it was 3.0. At the time, there was just 2, 2.5 and 3. (2.8 was introduced right around the time I did my hybrid swap). Then we (literally we.... found out on my car) through logging that the R70 couldnt deliver enough fuel consistently enough for what was requested....thats when the R90 pumps started to be included in the tune requirements. Once I got my stuff dialed in pretty much, I just dropped off and did suspension and wavetrac and ATM hose/IC stuff......so my info is so old that its invalid now. Thanks for all you do on our platform man!