37 Ton Northstar Wood Splitter - Unpackaging & Assembly Review

Рет қаралды 22,441

Күн бұрын

Haven't published in a while and decided to skip my typical narration on this one and publish as the 'silent film' type video. I was commissioned to help with this 37 Ton Northstar, which appears to be upgraded with significant changes from earlier versions of the same model I see on other KZfaq vids. This was ordered and shipped last month (March 2021), and if you are considering spending $2000 or more on this or any other comparable wood splitter I recommend watching this to the end. This goes fast as I had to cram a lot of video files into a reasonable KZfaq upload -- Enjoy!
UPDATE: Forgot the Grease! Well, forgot to put it in the vid anyway. . . .
There are FOUR Grease Fittings on the Underside of the Splitter Head Guide Cradle - Give Each 4 or 5 pumps with a grease gun before use.

Пікірлер: 24

@sparkiesford 2 жыл бұрын

I used this step by step to put together my new splitter. Appreciate your help!

@scottf6604 3 жыл бұрын

Great video. I made the same purchase. Overall very happy with the unit. Here are my findings: I purchased the 4 way wings used them for about 1/2 cord and removed them. Do they work YES. The machine has no problem with the 2nd wedge. Problem is I found you get 2 good size splits and 2 small or skinny splits. So went back to the single wedge for better control of the size of the splits. When working, the ram WILL get warm so expect that. One thing I will mention to watch is when splitting horizontal, wood slivers can and will build up under the ram when the ram returns to the home position. In time if not kept in check it will turn into quit a jam of wood debris. I have seen this in other videos but no one seems to have called attention to it. I have no regrets with my purchase and I wish you the best of luck with your new toy. thanks for the post.

@ordonezblogsnewyork 2 жыл бұрын

How much you pay for it?

@ciphercode2298 Жыл бұрын

I was thinking the same things about the wings. Some other brands they slip on over top of main wedge and you can use em or lose em as needed,but these bolt on. If all you did was 12" rounds theyd be great,but I imagine they could be better designed for easier removal when they aren't wanted.

@420bretts Жыл бұрын

I also have debries under ram any solutions to this issue?

@scottf6604 Жыл бұрын

@@420bretts Brett, what works for me is a piece of long narrow flat stock which I insert from the back and under the piston. If said wood built-up is left unchecked the power of the ram on return will have adverse effect on the unit. Best to keep a watchful eye. Best of luck

@woofy548 Жыл бұрын

Wish i had shop like this with all the lifts

@lonniepruitt5487 10 ай бұрын

It’s pretty in-depth process... makes me want to do look over if I buy on because stores have kids putting this stuff together

@rsellers 3 жыл бұрын

Are the provided hose clamps working well? I’ve seen some comment that the provided clamps are weak. Thanks for making this video! I’m about to assemble the 30 ton.

@bhill671 3 жыл бұрын

I stripped out several of the provided hose clamps and decided to replace them. They are definitely sub-standard

@TravisMontesano 2 жыл бұрын

i'm going to be buying one this week, I really don't like the hydraulic valve being held on with the pipe. I saw another youtuber had his buddy weld a bracket for it. Have you had any trouble with it coming loose while running the machine?

@bhill671 2 жыл бұрын

Not yet, however I'm not super happy with that design either. I'm sure that it was a manufacturer cost-saving measure. The only plus side is it eliminates one hydraulic hose.

@goodboyringo9716 2 жыл бұрын

2300.00 plus 355.00 shipping plus assembly

@smigletat9634 Жыл бұрын

Currently on Northern Tool... It is $2,399.00 + Shipping (635lb. for the 37 ton unit) & now it carries a Kholer 277cc engine instead of the Honda 😕 6/24/2023

@jamesandrew2012 Жыл бұрын

Hey , where did you get your straddle pallet stacker with the winch ?

@smigletat9634 Жыл бұрын

Checked back...

@justinmahon4032 2 жыл бұрын

Thank you for this. Now I know I don't have the tools required to assemble. Which stinks since I wanted the honda engine

@bhill671 2 жыл бұрын

It can be done without all of the lifting equipment I was using -- just a couple more people to help stand up the main beam. I was working by myself and didn't want to try to balance that main beam on end.