Let's walk through how to get setup to carve in 3D in Easel! Try it out at www.easel.com
Пікірлер: 36
@CharlesScottJohnstoneАй бұрын
Where can I find the stl, paid or otherwise, that you show in the thumbnail and on your Easel homepage in July 2024??
@user-sf1uu1gb4r Жыл бұрын
Where are you downloading the models from?
@tuckerlangford450521 күн бұрын
When i do the finishing pass it doesn't do what its suppose too. It goes where the material isnt. and it says its finished when its only just begun. Any idea what im doing wrong?
@DALILOMODIY Жыл бұрын
thanks! this is super helpful
@inventables Жыл бұрын
Great, glad it helped!
@nielsfpv9 күн бұрын
how do you change the finishing bit to a v bit
@liorcnc1456 Жыл бұрын
Great feature inventabels Thank you very much i believe it will save me some time...
@inventables Жыл бұрын
Glad it helped!
@pablocristianvannivalenzue40726 ай бұрын
Hablas muy rápido!!! Saludos desde Catapilco Chile.
@newerarc478410 ай бұрын
How would do a cut-out /clear-out (i dont know the actually term for it) of a 3d object?
@mmmmmmm87067 ай бұрын
When can we choose a different finishing bit???
@OverlandTrailer Жыл бұрын
Great Explaination! Thanks
@inventables Жыл бұрын
Glad it was helpful!
@traveltv7160 Жыл бұрын
Hello. Which post processor is suitable for ArtCam?
@Chaosweaver-1 Жыл бұрын
Couple questions, I dont see the "Cut Style" setting on my Easel project. Also I'm not following the process of roughing and detailing. Do I assign the item to be carved as detail or roughing? I don't get how it knows what should be roughed and what should be detailed.
@inventables Жыл бұрын
The roughing/detailing is just in the bit selection at the top. There currently isn't a way to assign a specific section for either, it just creates it automatically!
@tjallinghoek Жыл бұрын
Super helpful video. I’ve just 1 question; I’ve drawn a logo and wanna cut out the big letters at a depth of 4mm. Just beneath the big letters is a company name written in really small letters and I want to cut that out with my 60 degrees V bit at a depth of 1mm. The problem is, once is add the 60 degrees bit, he’s going to finish everything with te v bit, also the rectangle and the big letters. The question is; how can I ‘freeze’ cut settings ?
@inventables Жыл бұрын
Great question! The easiest way to do this is to use multiple workpieces (they are at the bottom). Have all your bit/cut settings what you want for the specific artwork, just have the one you want on the specific work piece.
@georgestone4691 Жыл бұрын
Thank you for the video! Can I have an X-Carve Pro 4x4 to experiment with?
@inventables Жыл бұрын
😀
@beniwen1 Жыл бұрын
Can you share the United States STL model?
@chrisneeley2398 Жыл бұрын
I use Patriot Nation Designs and I was wondering if you can combine something like a flag then add another design to it such as a flag then add on a firefighter etc. Thanks
@inventables Жыл бұрын
Great question! You can't currently combine then both inside of one workpiece, but you could set them up on separate pieces and carve them individually.
@chrisneeley2398 Жыл бұрын
Would that work with 3d flag also? If so could you possibly make a video showing how to?
@inventables Жыл бұрын
It would! More 3D carving videos are planned for the future.
@sylviacook2005 Жыл бұрын
can you flip it over and carve a name on the back by hitting bottom?
@inventables Жыл бұрын
Yep! You would just need to be careful to not cut deep enough that you would run into the previous carve. Also it helps if you have a way to index the material to the work board so it stays in the same spot when it’s flipped
@mikeking7219 Жыл бұрын
Do you still have to zero out the zed axis after tool change?
@inventables Жыл бұрын
Yep, since the length of each bit and how far it is inserted into the collet may change, you will always need to re-zero the Z axis. If you homed your machine from the beginning you could still use the same x and y-axis zero settings.
@tgarity12 ай бұрын
@@inventables I don't get how to zero the second bit, since the material is likely to be carved away by the first bit. What do I zero it on?
@travisbailey3079 Жыл бұрын
Does this require pro?
@inventables Жыл бұрын
3D carving does require Easel Pro.
@wolfrobots118 Жыл бұрын
Easel does 3D carving better than Vcarve....just say'n
@inventables Жыл бұрын
Glad your liking it!
@raytucker8060 Жыл бұрын
why does noone show how import STL images from the internet, You people only show how import it when you already have it downloaded and ready to import straight from your computer to EASEL
@inventables Жыл бұрын
Here are some great places to find free STL's online: blog.inventables.com/blog/8-best-sites-to-download-stl-files-for-3d-carving