Thank you for mentioning us. We are always happy to help.
@earthelder2065 Жыл бұрын
If the software is online I WON'T BUY IT EVER!!!! I have to own the app that controls my cnc or anything else for that matter. Thanks for the good review!
@shootdasmm Жыл бұрын
As for the final pass thing, if you didn't cut all the way through but want to. You could always just go to the software and lower the total passes to 1 pass only and just set the depth cut to the actual thickness, this works as you've already cut all the material up to the last little bit you need.
@wittworks2 жыл бұрын
1000% agree! I want a three axis probe. I’ve been thinking of making a two year review…. Great job!
@TheSwedishMaker2 жыл бұрын
You should! I would love to hear your opinions on it 😃
@bernardtarver2 жыл бұрын
I've been using a Carbide 3D 3-axis probe on my X-Carve for about a year. I wrote a short probing routine for it that works well.
@TheSwedishMaker2 жыл бұрын
@@bernardtarver cool! I will check that out! Thanks for sharing
@bernardtarver2 жыл бұрын
@@TheSwedishMaker No problem. kzfaq.info/get/bejne/gtZzhsJ907XLl5s.html is what I use along with the clamp from the X-Carve's Z probe.
@ChadsCustomCreations2 жыл бұрын
Great work I need to do one of these videos on my big Co2 laser it seems a lot of people are curious about how it is holding up. Love how you edited that B roll to the music
@TheSwedishMaker2 жыл бұрын
You should! Ive been thinking about getting one of those and would love to hear how it is holding up. Thanks!
@ssskids1232 жыл бұрын
Fantastic breakdown. Thank you so much!
@nutrox84 Жыл бұрын
Fra lillebror i vest, du har fantastisk bra videoer!
@TheSwedishMaker Жыл бұрын
Tack! 😃
@gwilasean7928 Жыл бұрын
Change bits with 2 wrenges not the button on the router
@TheSwedishMaker Жыл бұрын
Thanks. I do, but I guess I didn't show that part.
@taciolps Жыл бұрын
What is the measurement of the X-axis aluminum structural profile?
@andreabiske28152 жыл бұрын
What is the table you have your X-carve on? we are struggling to find a sturdy workstation that is sized appropriately
@TheSwedishMaker2 жыл бұрын
I built it out of mdf. kzfaq.info/get/bejne/kM6iZc55xpfcf5s.html There are some people that mount them to the wall and some have them fold down from the wall as well, but I had the space to make this and use the storage below for other parts, tools and whatnot
@jamesg23822 жыл бұрын
Thank you
@goffe2282 Жыл бұрын
You buy a tool and they only give you three years with the software? That is not even remotely acceptable. Does your hammer stop working after three years too? Seriously. Upgrades is one thing, but the software you get with the machine you should be able to run indefinately and having it online is no excuse.
@Justen781 Жыл бұрын
What about foam? Do you think I am able to cut out wide body panels for vehicles?
@xylonguitars Жыл бұрын
Thank you very much for sharing!!! I just purchased the Z-axis upgrade and would be very grateful is you could share which dustboot you are using... thank you, Evangelos
@TheSwedishMaker Жыл бұрын
Oh tough question. Im not sure which size it is to be honest
@xylonguitars Жыл бұрын
@@TheSwedishMaker not to worry... Suckit used to be the most successful, but they closed that business and evolved into onefinity...
@MagnusNemo-xc5nx Жыл бұрын
Have you considered the Openbuilds LEAD 1010?
@mikaelsoderstrom24342 жыл бұрын
Just asked my wife in Sweden if I could get one. She hasnt answered yet 👀
@Elianadasilvaleite2 жыл бұрын
Hello I'm from Brazil, my name is Eliana I watched your video, I want to buy the milling machine that you made a box and the hair combs, it works on 220 vts as I know I'm buying the right machine.
@kirkjohnson1423 Жыл бұрын
has anyone use this product on corian ??
@bnssoftware3292 Жыл бұрын
Where did you get the vacuum hose boom at? Do you happen to have a link to it?
@TheSwedishMaker Жыл бұрын
it came with the x-carve when I got it. Don't know if they sell it as an extra though
@SpadeAce Жыл бұрын
So.. This thing is useless without an internet connection? No thanks.
@amiddled Жыл бұрын
No you don’t have to use easel. Pretty much any offline gcode sender will work.
@pmsilvei2 жыл бұрын
Bro, unless someone gave you the machine, this is completely useless investment! You can build a PRINTNC for half the cost, and it's performance will leave you speechless compared to what you doing right now. As you take the maker scene so serious, do yourself a favor and search it. BTW, I don't have a PRINTNC. But I've designed and built a similar one and I know what I'm talking about. Good luck with your life changing (I just finished watching the other video) 😉🤞🏻
@TheSwedishMaker2 жыл бұрын
Thanks! I would probably have built myself a cnc If I had more time at hand. But yes you are right, its much cheaper.
@pmsilvei2 жыл бұрын
@@TheSwedishMaker Trust me, it doesn't take much time 😉
@erikcederb2 жыл бұрын
@@pmsilvei Compared to just ordering a ready-made kit and assembling an XCarve, reading up, learning about choices, sourcing, and building a PrintNC if you've never done something similar before, it does take a lot more time. Just the wiring of the PrintNC probably takes as much time as doing the XCarve build since it comes with plug-n-play cable bundles, and the software solution of the XCarve with the tight Easel integration is easier to get started with. That said, I would still recommend everyone who feels they are in for a build to do a PrintNC instead, since it is a far superior machine for approximately the same cost, and having built the machine yourself and gotten the understanding will be very useful in the future when you need to fix something. And it won't have any of the problems described in the video that is a result of a wimpy belt-driven machine.
@joythomas1002 жыл бұрын
My friend, your main problen is not with the machines of all kind, but with confusion and lack of "Inspiration"!!! Tools are made to do the job! End of story! What "job"... in your case? Just asking, you know?!??? My friend- you need Help!!!