3D Digital Clock

Рет қаралды 534,105

6 жыл бұрын

Schema and source on GitHub:
github.com/leonvandenbeukel/3...
This is another homemade digital clock. I designed it with Fusion 360 and printed it on my 3D printer. It took many hours of printing. I've also created a new Android App that you can use to control it (more info on GitHub). I've used the same controller board that I've made for my other digital clock. At daylight it's not very bright, results are best at evening.
Arduino (Nano)
Bluetooth module: HC-05
Real time clock: DS3231
LED strip: WS2812B 1 meter 30 RGB LED's
Temperature and Humidity Sensor: DHT11
Website: www.leonvandenbeukel.nl
GitHub: github.com/leonvandenbeukel

Пікірлер: 564

@ChandanKumar-vh7po 6 жыл бұрын

This is one of the best clock I have ever seen. Earlier was also from the same author but this is truly amazing.

@TheZooman22 5 жыл бұрын

Simply amazing! I am fairly new to the Arduino, and still learning the basics.This was a very inspiring example of what can be done with the Arduino, a 3D printer , and an App.

@KurzawaJakub 6 жыл бұрын

That is a lot of work put into this project. Great job!

@tomgray7049 6 жыл бұрын

This is still amazing to watch.... Thank you Leon 😀

@fraaggl 6 жыл бұрын

Incredible !! So beautiful and it open the door for so much adaptations. Thank you for sharing it !

@tomgray7049 6 жыл бұрын

I'm gonna try a six digit, as soon as I get pricing quoates from the service, I have no 3d printer

@amlebarhon683 4 жыл бұрын

Hello, I built this clock, it works fine. It was my first Arduino project, thank you Leon for your wonderful idea !

@ArthursHD 5 жыл бұрын

Looks great! It could be redesigned to make as an easily from recycled materials, recyclable commercial product at a relatively low cost.

@jimmyscott5144 6 жыл бұрын

What would be cool is to add some coding so that you can set night hours for the clock so when it’s like 8 pm till 6 am (or what ever you set, it only lights up soft colors or dim colors or if possible dulls the leds

@NeilHodgsonDARKHOURS 5 жыл бұрын

You could by coding in an LDR

@keithrichards6528 5 жыл бұрын

I actually enjoyed this more than other similar videos because it doesn't say DIY in the title lol I love 3D printers, they're just absent in my daily life xD

@julienmorris7051 6 жыл бұрын

That's a great project - kudos to you mate !

@LC-ue6mp 4 жыл бұрын

THANK YOU FOR YOUR TIME AND EFFORT.

@tomgray7049 6 жыл бұрын

Thank you. You really perked my interest in this. Not only the electronics side but the 3D side. I am looking into the anet a8 as that seems to be the most fun to build and modify for some fun. I love the stuff you do, thank you very much. I wont be able to do so till maybe around xmas. Thanks again. Love that cnc machine and the 14 segment display. try the 16 segment and lets make a digital clock out of that. -Tom

@Phantomthecat 6 жыл бұрын

Why are some people so talented. I feel so inadequate sometimes... 😆 Great work, love it.

@tomgray7049 6 жыл бұрын

Phantomthecat I'm the same way.

@bluegiainh1430 5 жыл бұрын

Clock

@billycash9905 6 жыл бұрын

New improvement from previous project? Great job, bro 👍👍👍

@LeonvandenBeukel 6 жыл бұрын

Yes, thanks 😊

@roangora21 5 жыл бұрын

Awesome, you really love electronics, excellent work!

@pawelsikorski3975 6 жыл бұрын

That's awesome mate. Seems that I need to get 3D printer :)

@tomgray7049 6 жыл бұрын

Pawel Sikorski you and me both

@tomgray7049 6 жыл бұрын

Pawel Sikorski I'm getting one by christmas.

@tomgray7049 5 жыл бұрын

I got one just for this project, then I had seen and downloaded 3 more clock projects from thingiverse.

@tironxxx 6 жыл бұрын

Fantastyczny projekt!

@schn33w0lf8 6 жыл бұрын

Thats amazing! I wanted to build such a clock either for a year or so maybe with a led square matrix... Now i want to start the project ;D

@ciklez 4 жыл бұрын

Done?

@Vank508 4 жыл бұрын

Ciklez lmfao .......waiting........

@namocrafts1101 6 жыл бұрын

Wow sir amazing project I like it am gunna gather the stuff and do it thank u very much for sharing

@RoadToTheCup 5 жыл бұрын

Very cool and clever, great job!

@felixschwarz5176 6 жыл бұрын

Nice man... It looks awesome

@MikeysLab 4 жыл бұрын

Nice clock, my only concern would be you can not take it apart, so it is hard to service/expand. I would have attached the covers/diffusers to the back with screws so you can still access the LED's

@robertrobarco5882 5 жыл бұрын

An amazing project. Is it possible to set automatic switching between time-temperature and humidity ??

@ChunkySteveo 6 жыл бұрын

Awesome project!

@LeonvandenBeukel 6 жыл бұрын

Thanks 🙂

@harshitrajsud9hridn 5 жыл бұрын

@@LeonvandenBeukel hello sir can you please tell me where I can find arduino coading

@LeonvandenBeukel 5 жыл бұрын

@@harshitrajsud9hridn Check the GitHub link in the description.

@Lyonfeather 4 жыл бұрын

@@LeonvandenBeukel Its not in the repo

@syedhanan7547 3 жыл бұрын

@@LeonvandenBeukel i will pay 20 dollars will you deliver it

@patiaditya 5 жыл бұрын

Great work ! Thank you for that !

@syamsarath9422 6 жыл бұрын

Great upgrade

@Khain_Hutchinson 6 жыл бұрын

Super travail , bravo !!

@ariaontube1 5 жыл бұрын

I made it,and I worked first time,I am very pleased. Thanks

@LeonvandenBeukel 5 жыл бұрын

Awesome!

@ruhaizanfazreenashraffmohd8835 5 жыл бұрын

I got confuse with the order of the led..any tips?

@inteligenciaartificial622 2 жыл бұрын

muy bueno tus proyectos y gracias por el aporte que le haces a la comunidad!

@goostador 5 ай бұрын

That's awesome, great work!

@StroitelPlotnik 4 жыл бұрын

Hi! How to make the clock automatically switched from the clock to the temperature and back ?

@xiamenkingheightelectronic9207 6 жыл бұрын

Wow! Cool project!

@arkadiusztomaszewski5181 5 жыл бұрын

Erg mooi. I wonder how far you can stay from and still read it. It could be nice way to display time on the tower.

@jeff9314 6 жыл бұрын

Juste merveilleux

@misstkerl2108 2 жыл бұрын

Very nice watch and wonderful work. Was also a lot of work to create the app, many thanks for your work, I wish you all the best. Now I have to build the clock too, says my wife and I want her to hang in the living room. Have to work for me again. First had to make our table with WiFi LEDs and Alexa.

@anthonygray5581 5 жыл бұрын

hey I'm looking to build the clock you built from the 3d printer how do i get the program from you as it's amazing to watch...

@jenovaizquierdo 6 жыл бұрын

Awesome project you made me subscribe.

@jittaweemetesirorat7577 4 жыл бұрын

3D Digital Clock Successful. Thank you very much.

6 жыл бұрын

So Beautiful. Thankyou!

@wellphoto3d 2 жыл бұрын

Intelligent in Action! Thanks!

@tomgray7049 5 жыл бұрын

I Still LOVE watching this to this day. Can't wait to give it a run. I will be ordering my anet a8 when I get my taxes back. Thank You so very much, this is awesome. BTW, have you thought about scaling this up for a bigger size on the bigger printers? I would love to see this on the anet a10

@NeilHodgsonDARKHOURS 5 жыл бұрын

A question I have printed it now I'm now wiring it and would like to know about the seconds leds would they be A30 and B31 the last in the string? And thanks it has been a great project

@kevinalexander92 6 жыл бұрын

Nice works!

@TheJay6621 5 жыл бұрын

I was like huh.. he 3d printed it.. most people doesn't have it home.. if he would have made from card board or so than he would realize how tough it is.. but than I went to older videos.. Ohh man He already did that.. Kudos.. Buddy.. well done..

@LeonvandenBeukel 5 жыл бұрын

🙂👍

@ggate01 6 ай бұрын

Great Work.

@ChozoSR388 5 жыл бұрын

Aren't the dots in the middle supposed to blink in synchronization with the seconds on clock mode?

@prabakaranpalanivelu 10 күн бұрын

thank you for this project. it works for me. easly understandable code.

@davidwagner6973 5 жыл бұрын

Hello, could you please help me to change the LED-settings in the code to make it work with 2 LED´s per segment? I tried almost everything, but I can´t get it to work. Thank you!

@zoomboom3003 3 жыл бұрын

I did it if you want

@ivovisscher7573 3 жыл бұрын

@@zoomboom3003 Can you share your ino.firmware but with 1 led per segment?

@zoomboom3003 3 жыл бұрын

The original ino in the github is with one led per segment!!!

@mouadall9641 Жыл бұрын

@@zoomboom3003 can you share your code with me ?

@dleivam 4 жыл бұрын

Awesome.. I'm always envy those perfect 3d prints, I have a ender 3 and almost always my prints have issues.. I upgraded the extruder, hotend, the bed, the mainboard, stepper drivers, cooling and yet I can't have consistent results.

@STPKY1987 6 жыл бұрын

wow ziet er vet uit :D , nu wil ik er ook één

@Entityism 5 жыл бұрын

Very cool project! Do you know if you'll ever be sharing the Android code? Would be a great example of how to code both sides for BT. Thanks.

@Asd7pl 3 жыл бұрын

Great job, I really like it

@vonsyp 6 жыл бұрын

Hi Leon, Thank you for your excellent project. By the way how to control the clock if we don't have an android phone ? :) Regards

@grumich4084 5 жыл бұрын

Oh, that's good. That's REALLY good! About the only thing I'd add is to make the 7-segment's, uh, "segments" stand out better; there's a sort of "light bleed" between them and parts of the background. But outside of that, it's quite impressive, including the different displays (time, temp, etc.). "Ya done GOOD!" (And wouldn't ya know it? I left my 3-D printer in my other pants! But once I get it out I'll get RIGHT on it!) :)

@grumich4084 4 жыл бұрын

Yeah I like it "except" for that light-bleeding. And I've seen other ones that too could use a bit of work to make or minimize that object's "bleeding," in both light and dark. And as I recall it's more evident in lighted rooms; my GUESS is that's because of the ambient light which makes the room brighter so the LEDs get dimmer in comparison. But that's really just a guess (although it happens to US ALL the time; The words ""snow blind" are there for a reason, after all.) It "seems" possible to remove some it, but it might not be a "trivial" fix. At one time I thought about building a clock just like that -- it seemed rather "simple." Yeah, right. Just LOOKING at the work Leon did and it's clear this ain't "simple" at all. (Hmmm, maybe THAT'S why I ask "Alexa" to find the time for me now.) ;)

@Puckeye 6 жыл бұрын

Really nice.

@TemaxTech 6 жыл бұрын

Enjoying mine

@earlybird1969 Жыл бұрын

You’re a genius man

@usarduinosandmore554 5 жыл бұрын

Could you do a preview or good breakdown on your 3D printer. Like which 3D printers are the best

@wladimirkarpenko6320 4 жыл бұрын

Hello. I want to repeat your project. Tell me how to connect segments correctly? and especially the points. Can you draw a detailed diagram of the connection of the segments?

@tomgray7049 6 жыл бұрын

Can't help but watch this video, so smart using autdesk fusion 360 like a pro. I can't wait to print this to see how big it really is. Still looks awesome. Thank you. So did you upgrade your power supply and added the fused outlet/switch combo? Did you add the external MOSFETs? I might just for safety. Looks like I am going to print a ton of stuff :) I'm excited.....

@user-nr5uy4jr4e 4 жыл бұрын

Hello. You can be asked to redo the app for the clock. When you start it gives many an error

@leilanielectronics Жыл бұрын

Good job!

@mojordomomojordomo2433 4 жыл бұрын

Hello, please write the full layout of connecting the LEDs together. how are points connected?

@namocrafts1101 6 жыл бұрын

Hello I got it working sir thank u I had to download Adafruit_sensor library and also I had to download Time_h library then it compiled Thank u very much now I’ll start 3D print the material Great project u always make professional I always watch ur video Thank u again and once am done I’ll share it here

@onil3372 6 жыл бұрын

hello sir,how about the led connection from 1 to 30.?

@namocrafts1101 6 жыл бұрын

lino jr hello I think there is no wire connection diagram but am trying to figure that out through the video by stopping it and playing it to see how he is wiring it

@rdmarts9546 5 жыл бұрын

Hey, did you figure out how to connect it? I am trying to make it atm and I am confised on how I should connect everything.

@j4nch 4 жыл бұрын

Really nice project! I've another project for which I'm interested to use the HC-05. Is there any chance to see how you manage the communication on the android app?

@jorgegabrielsalazar7218 5 жыл бұрын

excelente!!! felicitaciones

@energylab227 6 жыл бұрын

Very cool. For the scoreboard, is it possible to have the right score in a different colour to the left score?

@Moose254 3 жыл бұрын

Great project. Does anyone know how I can include the rainbow function instead of static colors?

@burapat4100 4 жыл бұрын

my rgb leds are all on, there are several different color leds, how do you want to change it to a clock ... thanks

@skitt4315 4 жыл бұрын

nice project

@sarimbinwaseem 5 жыл бұрын

Nice job

@NirvanaWoodWorksbyJanie 6 жыл бұрын

Really cool 😎! Love it & your other "DIY 7 Segment Digital clock". But it looks like you need to put in a lot of time and patience into it. Specially the coding side of it. If you download the app, are you able to change the color of the "scoreboard" sides? Like to differentiate the teams?

@saintpine 6 жыл бұрын

Excellent... WOW

@karistuck 6 жыл бұрын

I love it!! thank you

@freebird01jm 2 жыл бұрын

what would be needed to change in the code to use twice the number of LED's so that each segment has 2 instead of one for the segments. for a larger display?

@patprop74 6 жыл бұрын

Very cool!

@Infinityprops 6 жыл бұрын

excellent work

@LeonvandenBeukel 6 жыл бұрын

Thanks Miguel ☺️

@BD-33 6 жыл бұрын

I like it , wonderful .... Thanks

@virgisvanagelis3261 5 жыл бұрын

Hey. Can who knows or faced a similar problem why in Bluetooth Digital Clock App when you select a Bluetooth headset (HC-05) immediately the program closes ??????

@hlammers6798 2 жыл бұрын

Really cool project! I'm thinking about building this clock, but can I control it also with a IPhone anyway? Or with a remote control on the arduino?

@smarthomehk 5 жыл бұрын

this is awesome.

@thetiredtechie2704 6 жыл бұрын

Excellent!

@lucasfritz2786 6 жыл бұрын

wooow that is awesome!

@chrisk.1539 6 жыл бұрын

Thats was AWESOME.

@LeonvandenBeukel 6 жыл бұрын

Thanks

@anthony_correia 6 жыл бұрын

Very cool project! I reproduced it works on top! But I would like to add the control of the color and the brightness by wifi! It is possyble to have the commeande serial which send it since the module hs05

@larrieuolivier9423 6 жыл бұрын

Realy cool 🖒

@ElectroIoT 5 жыл бұрын

many thanks for this great clock is this support 12hr clock

@yasargulseren2544 3 жыл бұрын

Thank you for share. I like that clock. I want print and make one.

@MarcelDiane 6 жыл бұрын

I like your style!

@LeonvandenBeukel 6 жыл бұрын

Thanks Marcel 😄

@electronicforall909 6 жыл бұрын

Very nice

@liveboy38 6 жыл бұрын

Can you help abaout code? i want to change every 1minutes between clock, tempature and humudity.

@mohanamapab6369 4 жыл бұрын

VERY NICE IDEA ...SUPER

@Bianchi77 2 жыл бұрын

Creative video,thanks:)

@alantamb 6 жыл бұрын

Loved it

@ralfmays5693 5 жыл бұрын

super gemacht.....

@sumerianrcpilot8889 4 жыл бұрын

Brilliant... is it Ok to use a ds1302... I don't have access to a Ds3231 at the moment 😞

@pescelupo 3 жыл бұрын

Of i want use for outdoor vision, which type leds are best?

@Veso266 5 жыл бұрын

Danke! you think you could publish your arduino sketch and C# source of your mobile app? BTW: why do you have "van" in your middle name, I saw a lot of people from Dutch have that but I just don't know the purpose

@burapat4100 4 жыл бұрын

my project was unsuccessful, how do I set the led RGB color ... thnks

@martijnvanoverbeek889 3 жыл бұрын

Hello Leon, we are printing your clock now. It’s a great design. Thank you for sharing. What are those black things in the numbers? Some kind of paper?