3D PRINTED CNC CUTS METAL (from scratch)
Рет қаралды 1,365,599
4 жыл бұрынThe files to make your own can be found here:
ivanmiranda.com/products/3d-p...
It works! The 3D Printed CNC MkII is finished and it works beautifully. I made a test cut for an HTD5M 100 tooth gear in less than 45 minutes in 6mm aluminium plate and it was perfect!! Imagine what can we do with this!!!
Incredibly I did not break a single bit during the making on this video, I invested quite some time with that poplar soft plywood refining the process and I go quite good at it (as good as to not break bits).
As you may remember there was a previous version of this that ended up becoming a donor in a "part" emergency. This revised version is easier to assemble, more refined and can be printed in smaller printers.
This video has no sponsored components, all the parts I used I bought them myself.
If you want to support this channel you can do it here:
Patreon: / ivanmiranda
Merchandise: www.bonfire.com/store/ivan-mi...
PayPal: www.paypal.me/IvanMirandacom
For regular updates on my projects follow me on:
Instagram: / adnarimnavi
Twitter: / adnarimnavi
Facebook: / adnarimnavi
@tbandikoota 4 жыл бұрын
A thing of beauty! I wonder how many viewers realize the amount of effort that goes into 3D designing a CNC Router, and then making a video and editing it this well. You are gifted and an inspiration.
@Elpollo973 4 жыл бұрын
I do, I did one too. No video about it, yet*, as I'm still working on a RPi software allowing me to let the machine work alone without my computer collecting dust and metal chips ! It's quite nice to see a project come to life, and not killing anyone right after powering up :D
@justd3fy 4 жыл бұрын
@white he used what he had :)
@sitgesvillaapartmentneilsc7924 4 жыл бұрын
thats because we CNC people are patient and gifted talented folk and love our hobby. 😄
@mastabas 4 жыл бұрын
@white there are steel threaded rods inside the aluminum. also the linear rails... the machine is clamped to the bench. it works just fine
@To-mos 4 жыл бұрын
@white Now he can CNC himself parts for a new CNC machine made out of steel.
@BeanzAndBrass 4 жыл бұрын
I love how the chanel evolved like the new editing stile and music and tool upgrades as upose to the small shack and bad tools i love it good job
@andreicheptea8020 4 жыл бұрын
I really respect the time and effort that you put into this project and I really like how you made it look so easy. You are a source of inspiration.
@WillWinder 4 жыл бұрын
Great job! I've been watching your videos for a while, so it was a nice surprise to see you using my software to control your machine. You really make it look easy.
@ivanmirandawastaken 4 жыл бұрын
Your software made it way easier, thanks a lot for your contribution!!
@shane142 4 жыл бұрын
I like how you think outside of the box and keep things simple in how it's constructed, That everyone dose not need state of the art tools like a tig welder to to hold the whole thing together.
@ivanmirandawastaken 4 жыл бұрын
I won't lie to you, I'd love a TIG welder but yeah, I could even have done it without the grinder and the miter saw. Thanks!!
@burylad4eva 4 жыл бұрын
i love this guy . He makes things look so easy. I nearly cut my hand off turning the lathe on now a days lol !
@ivanmirandawastaken 4 жыл бұрын
The magic of editing!
@Volt64bolt 4 жыл бұрын
I agree,although with the proper skill;training and tools it does get quite easy.
@damiens8698 4 жыл бұрын
Adam Savage is that you?
@pixelsmaster5452 4 жыл бұрын
I've been following Ivan's projects for a long time and learning a lot from him. I just realized that my best take away from Ivan has been " maintaining a positive outlook " during the execution of bigger projects ... and ... " Good enough is really good enough ! "
@CountryMaster16 4 жыл бұрын
i just found your channel by accident but im overwelmed at how much of a genius you are, im really really impressed
@AT_Automation 4 жыл бұрын
As an engineer who loves building diy cnc stuff. You have an amazing talent! I honestly am blown away at how gifted you are at building stuff with simple tools. Lining up linear rails is really hard and you did it beautifully
@Flapdr01 4 жыл бұрын
I don't see him lining up the rails anywhere?
@AT_Automation 4 жыл бұрын
Flapdrol well I mean obviously he did eh? It wouldn’t run if not.
@amadine770 4 жыл бұрын
Truly well put-he has exceptional talent and my worries about the Makita drill not living up to the task evaporated when he demoed the completed project.
@Flapdr01 4 жыл бұрын
@@AT_Automation Would still run if compliant enough.
@MCircuits 4 жыл бұрын
Simple tools yeah right..I have not seen any video who built their CNC machine from scrap materials that works as it should. All bunch of video all over KZfaq channel uses power tools. Damn freak.
@justinallen4903 4 жыл бұрын
This is one of the best build videos I've ever seen! Great editing as always Ivan!
@omargalil7672 4 жыл бұрын
I'm amazed by the amount of work that you put in to make this! Thank you for sharing your talent
@black8joker 4 жыл бұрын
The amazing quality and quantity of the work you've done is simply AMAZING ! You really disserve the support! Can't wait more to have a similar workshop to do things in the same spirit. Great JOB !!!!!!!!
@mallingdave 4 жыл бұрын
Love how your editing style has improved over time.. must take as long as the projects..
@ivanmirandawastaken 4 жыл бұрын
Thanks! This one went a bit too far, this has almost an entire week of editing
@chrisdub8883 4 жыл бұрын
Ivan Miranda A week! Now that's commitment. But it was worth it, great to watch 👍🏻
@DavidBauer38 4 жыл бұрын
I was just about to say I like the editing as much as Ivan’s fantastic projects!
@MCsCreations 4 жыл бұрын
Yeap, I definitely agree! 🖖😃
@xxportalxx. 4 жыл бұрын
@@ivanmirandawastaken the quality is deserving of the effort!
@anystrap404 4 жыл бұрын
I was already hugely impressed with your giant 3D printer (which I TOTALLY want to build some day) and now you add this fantastic CNC build that looks fantastic, works excellent, and matches the printer! You inspired 2 awesome machines to the list of builds I want to make. I love what you're doing, please keep it up!
@TheDro 4 жыл бұрын
9:09 Nice Catch!
@The1Creston 4 жыл бұрын
Not only is your project amazing, but the video editing and finished content is so entertaining!
@joaoferreira563 4 жыл бұрын
I love your energy and the work you develop here on this channel! A lot of the stuff I do is because of your videos!! Keep up the awesome work and... make something!!!
@ivanmirandawastaken 4 жыл бұрын
Mission accomplished!
@rubixrj7074 4 жыл бұрын
Great video, excellent editing, loved it. Tips: Run a pass with a big end mill over your waste board to level it with the spindle so each layer is 100% in contact with the material.; Use lock tight on all bolts!
@rhadiem 4 жыл бұрын
As someone who built a 48" x 48" CNC machine kit, this was quite the thing to DESIGN and then BUILD. You have some serious skills, loving the videos.
@jasoncreech4486 4 жыл бұрын
As usual I am completely blown away by your incredible project. I need this machine in my life!!!!
@ivanmirandawastaken 4 жыл бұрын
Yeah!
@UncleJessy 4 жыл бұрын
Good lord man, all these shots/edits. Beautiful stuff.
@ivanmirandawastaken 4 жыл бұрын
Thanks mate!!
@kingsleyjamal5898 2 жыл бұрын
instablaster.
@CarlosSantos-ft1hl 4 жыл бұрын
Amazing, man it's that perfect, I never seen before! Your project it's clean and very good. Good job!
@wordedon 4 жыл бұрын
Loved this video! Also wow what a fantastic machine build as well!!! I really enjoy seeing your designs for machines too. Simple, modular, robust, & super clean !!
@MrCybergladiator 4 жыл бұрын
Excellent video! One suggestion though, it might be a good idea to use tabs to stop the cut out piece shifting and getting ruined or ruining the cutting but. Keep up the good work!
@ivanmirandawastaken 4 жыл бұрын
Absolutely, I was doing just tests, final parts will get much more love, thanks for the tip!
@linkintiger 4 жыл бұрын
@@ivanmirandawastaken awesome build did you tested milling in steel or aluminum only?
@RonaldFinger 4 жыл бұрын
Absolutely fantastic!
@wjpreslar 2 жыл бұрын
This? It's nice, but you should watch your own channel if you want to see absolutely fantastic.
@Masso1973 4 жыл бұрын
Super, love it, your enthusiasm is cool. I really like the no nonsense design and the parts you print reflect that, nice and clean, do exactly what they’re supposed to do, no fuss. Bravo 👏
@some1else787 4 жыл бұрын
Your bracket designs for 3D printing are Awesome Good Sir. And I'd like to thank you for getting me motivated to return to my own CNC router design/build. Something I'd just ignored for too long now. Incredible Build!
@integza 4 жыл бұрын
Thats awesome hermano! Need me one of those !
@ivanmirandawastaken 4 жыл бұрын
Yeah!
@robertcook4215 4 жыл бұрын
Love it! Could you please make a video of all of the tools you used to make this? Your progress of the years has been amazing and an inspiration :-)
@victoralvaro7676 2 жыл бұрын
I'm very impressed. I see this video for third or more time and I think that this tutorial is one of the best for made DIY CNC, at least, that I have seen, and I have seen a lot of DIY CNC videos
@warikyacent6655 4 жыл бұрын
Beautiful montage Ivan, love it, CNC build/print/work are also excellent.
@RamyRC 4 жыл бұрын
Amazing work!
@salutoitoi 4 жыл бұрын
Watching your video: your editiing skills improved ! Good job
@ivanmirandawastaken 4 жыл бұрын
Thanks for noticing!
@EZY3DLAB 4 жыл бұрын
Your build videos are so therapeutic to watch. My inner maker is so happy! Keep it up Ivan!
@crocus80 4 жыл бұрын
Your videos are truly inspiring for all the DIY and makers!
@kerseyfabs 4 жыл бұрын
Very nice job! I'd love to build one as well. I can't wait on the files!
@rollandelliott 4 жыл бұрын
he is realeasing them to patreon subscribers worth the $5/month!!! please join!
@IdenticXP 4 жыл бұрын
Finally you´re back!
@ivanmirandawastaken 4 жыл бұрын
Yessss!
@jamesball6069 4 жыл бұрын
a joy to watch with the hours of editing!!!!!!! Truly a labor of love.
@pqgscott 2 жыл бұрын
Ivan, I'm addicted to watching your videos! I find my self watching them more than once they are awesome and excellent work! Something tells me I'll be buying your plans and building this CNC router!
@the_golden_ingot 4 жыл бұрын
The way you record and edit your videos truly makes them especially special !
@ivanmirandawastaken 4 жыл бұрын
Thanks!
@Mobile_Dom 4 жыл бұрын
honestly this looks cleaner than some of the commerical CNCs ive used
@frankvonthienen3862 4 жыл бұрын
Hi Ivan didn‘t pop by a couple of month, was really busy time. I am happy I found this vid. It inspired me to finish my MPCNC, which is resting abt 1,5yrs now :-) I mean everything is almost finished, just align it to the board, level it, and it is done :-) Thanks for your inspiration... Stay safe
@jasongamer8649 4 жыл бұрын
Very impressive! I really like the trapped nuts that get friction fit buy the same bolt used to install it and use it. Really good accuracy for the design, I did not expect belts to hold tolerance like that .
@robr9313 4 жыл бұрын
Are the files on your website? I looked around, specifically under the "shop" tab, but i dont think the link is working?
@rollandelliott 4 жыл бұрын
he is realeasing them to patreon subscribers worth the $5/month!!! please join!
@3DPrintingNerd 4 жыл бұрын
Your beard is looking majestic, my friend.
@aslaf0 4 жыл бұрын
Why have I seen you in every 3D printer/CNC channel comment section today 😱. I really appreciate the fact that your really active in the community!
@3DPrintingNerd 4 жыл бұрын
@@aslaf0 I dunno? I just really appreciate how much awesome there is in this 3d printing community. I just need this pandemic to get done so I can travel again and hug everyone.
@SVRsoundproduction 3 жыл бұрын
You are a genius, thank you very much for being there and sharing your experience with us!)
@Yves030 4 жыл бұрын
Had so much fun watching this inspiring video... great work, great video! Thank you for sharing this.
@willierants5880 4 жыл бұрын
I feel this is one of the more unappreciated maker/3d printing channels on KZfaq. Let's help change that! Ivan should be at 500k subs by now. Help get the word out.
@tiborbalogh3361 4 жыл бұрын
Hello Ivan, May I know when will be the BOM and the STLs available on your home page? Thank you in advance for your feedback.
@rollandelliott 4 жыл бұрын
he is realeasing them to patreon subscribers worth the $5/month!!! please join!
@shingabiss 4 жыл бұрын
Always enjoy your excellent builds! I have been making these things since 1995, started with the old PC parallel port for control, Visual Basic 4 and Windows 95.
@chrigihaller9044 4 жыл бұрын
Ingenious video editing! And as always, your videos and projects are great!
@francescovalle8678 4 жыл бұрын
Omg It cuts the aluminium perfectly 🤩
@AndersJackson 4 жыл бұрын
It is about sharp tools and the proper speed. Then you can make steel. It will take way too long though. :-)
@1SweetPete 4 жыл бұрын
@@AndersJackson and machine rigidity from work to endmill.
@AndersJackson 4 жыл бұрын
@@1SweetPete Yes, that limits how fast one can mill.
@royassas 4 жыл бұрын
Hey Ivan! Once again, a really great build! Thanks for all your hard work. You inspired me to build my own machines and yesterday I fired my first 100W CO2 laser in our makerspace. Do you have any advice on how to tune velocity, acceleration and jerk - other then just winging it?
@ibanjimenez5900 4 жыл бұрын
La edición del video es simplemente genial y tener esos conocimientos para construir máquinas y todas las piezas necesarias..es simplemente espectacular! Felicidades por el canal
@Beneteau2 4 жыл бұрын
Great work! You are an inspiration Ivan! Looking forward to build my own!
@MadeWithLayers 4 жыл бұрын
Nice
@jhonatassouza3802 4 жыл бұрын
can you share with us more details about the project, files, draw. i want made one
@jeoq8566 4 жыл бұрын
That's Always a pleasure to see your vidéo ! It Always shows interesting subject !! All you do is very crazy !! With few tools ! Congratulations for all
@alexche1850 3 жыл бұрын
True masterpiece! It was a pleasure to watch!
@jamessheridan88 4 жыл бұрын
Do you have the models available? Is this open hardware?
@Joys43 4 жыл бұрын
Bonjour Super travail ! Les fichiers 3d sont t’il disponible ? Merci
@elsecu27 3 жыл бұрын
Thanks so much man, great job, this inspire me to try to build my own CNC (one of my most ambitious projects)
@franklydude 4 жыл бұрын
Amazing skills and a wonderful machine, you can be very proud!
@Lozoot2 4 жыл бұрын
Welcome to the world of CNC! _"It's like 3D printing, but in reverse!"_ Double sided tape (or the good ol painter's tape and superglue sandwich) will soon become your best friend 😁
@Veikra 4 жыл бұрын
what about carpet tape ?
@Lozoot2 4 жыл бұрын
Carpet tape works nice enough for larger workpieces but has too much give for my taste when using on smaller stock
@GeneralChangFromDanang 4 жыл бұрын
Like 3D printing but more predictable.
@MattJFilms 3 жыл бұрын
A suction table would be nice as well!
@zdenekstrouhal1191 4 жыл бұрын
Have a good day. A machine like this has always been my dream. How do you control it? What software do you use?
@plazmotech5969 4 жыл бұрын
Looks like it just takes gcode! So any software that outputs gcode will do the trick!
@Charlie-nf9sy 3 жыл бұрын
Excelente !! es maravilloso ver como se construye una maquina de diseño en 3D, haces ver las cosas con mucha facilidad y la producción del vídeo es sorprendemente fantástica. Es un vídeo inspirador, buen trabajo
@rdineshkrish 4 жыл бұрын
Fantastic Ivan Miranda, you are a star !
@Kenopy 4 жыл бұрын
Building skill: 10/10 Marker skill: 11/10
@squirrelrobotics 4 жыл бұрын
A sharpie is any maker's best friend.
@TechMasterRus 4 жыл бұрын
4:45 Does the frame really hold only on friction between aluminum tubes? There should be at least some inserts or they can be welded together.
@vcokltfre 4 жыл бұрын
I know I'm a bit late to the party but the editing work you put into this is astounding, this is awesome, keep it up! :D
@androsefernandes134 3 жыл бұрын
This was so satisfying to watch! its so clean work! Keep it up!
@davidedeangelis1490 4 жыл бұрын
Hey I've watched this video some months ago and just came back, cause I'd like to make one. I'd like to know what was the cost for the entire assembly. Thank you!
@chrisgulotta 4 жыл бұрын
according to his BOM, its roughly $620.00 US
@ralmslb 4 жыл бұрын
Love it. Will you be sharing the 3D printing parts SLTs? Also how much did it cost in the end everything?
@oilio5465 4 жыл бұрын
Also what stepper motors and drivers did you use?
@henry67278 4 жыл бұрын
@@oilio5465 he said nema 17 and he obviously used a4988, tmc 2100 or the drv ones a4988 are the all round best choice
@rollandelliott 4 жыл бұрын
he is realeasing them to patreon subscribers worth the $5/month!!! please join!
@eqnish 4 жыл бұрын
I too would love to know the over all cost of materials!
@3dpchiron709 4 жыл бұрын
Thanks for the videos! Some suggestions: using one of those router+guide techniques to flatten your build table could be good (seems slightly convex), helping you build frames like this square, with greater ease. Once flat, perhaps finish the top with sheet metal? Could see the CNC frame rocking around on it at about 14min, before you attached the MDF. Also wondered if a 3D printed milling machine might be a good prior build, for precision drilling the guide rail holes in the box tubes - maybe with a stepper motor feeding the tube by exact amounts? I read that correct installation surface for guide rails is important to limit any deflection that can come when tightening them up (as the carriages have tight tollerances). But maybe it's something you would only notice moving at higher speeds, with wear over time, or using expensive rails. Good luck with everything :D
@lionellediaz2566 4 жыл бұрын
About 95% working on the actual project, 5% talk! You just got a new subscriber! Please continue making more projects, or perhaps lessons about CNCs
@AliA-wb2tk 4 жыл бұрын
when you gonna provide the files for this project?
@Gear-Logic 3 жыл бұрын
Ivan: *Wears a hoodie that says "This [screwdriver] is NOT a hammer"* Also Ivan at 6:46: *Uses screwdriver as a hammer*
@jaredjones6570 3 жыл бұрын
How did I miss that!? haha
@AvivMakesRobots 4 жыл бұрын
Greatly accurate!! Incredible work.
@MatthewTaylorAu 2 жыл бұрын
this is really cool. the editing is on point. thanks for posting.
@cosmo9882 4 жыл бұрын
Excellent. Please be careful wiping away burs with your finger I could almost feel them piercing my skin 😓. It is a fantastic cut on the aluminium. 👍😎
@Frappudazzu 4 жыл бұрын
Amazing, you can machine metal replacement parts to make it even stronger!
@armastat 3 жыл бұрын
now if we can get these pesky dumb machines to Make and assemble electronic components, Integrated Circuits, circuit boards, motors, belts, screws, nuts & bolts, extruded beams and insulated wires - then the AI revolution could begin.
@theprecisedeveloper4304 4 жыл бұрын
You make me jealous and I don't get jealous easily. Excellent machine man. Kudos!
@thedocdodge 4 жыл бұрын
I could be in the worst mood ever and be happy when I watch Ivan's videos. He's so full of enthusiasm that I totally cannot be angry. lol
@joshuahuman1 4 жыл бұрын
Here is an idea to improve the machine even more fill all of the nonmoving tubes with epoxy granite (sand rocks and epoxy) or concrete
@danedwards_ee 4 жыл бұрын
Shuddered when you stuck your fingers near the bit while it was running.
@ivanmirandawastaken 4 жыл бұрын
It looked worse than it was, camera angles can look tricky sometimes.
@khanhphaminh1175 4 жыл бұрын
@@ivanmirandawastaken Hello. Which router did you use?
@cklamNL 4 жыл бұрын
It's shown literally at 13:15
@khanhphaminh1175 4 жыл бұрын
@@cklamNL ok thank you so much
@NixCM 4 жыл бұрын
still safer than me in the kitchen :P
@cabrillaseca8084 4 жыл бұрын
Iván no palabras para describir lo máquina que estás hecho!
@johnwoods9380 Жыл бұрын
Thank you working so hard to build your CNC and documenting your efforts. You have inspired me to work hard and bring home a paycheck and to pay someone else to build a metal cutting CNC for me
@paulloth21 4 жыл бұрын
Nooooo I've spent a month making one and this is so much better!
@ivanmirandawastaken 4 жыл бұрын
You spent a month gaining experience
@paulloth21 4 жыл бұрын
Oh yes definitely. Great way to learn !
@sd6184 4 жыл бұрын
Люблю этот канал, хоть видео и выходят не часта... Лайк за идеи.
@marcdedecker2962 4 жыл бұрын
amazing work, beautiful video, excellent editing, love it
@rogeliomartin9529 4 жыл бұрын
Congratulations this is the most serius proyect I have seen in your channel Im pretty sure you Will make a lot of good stuf with it
@jappiemoto 4 жыл бұрын
Damn how many hours was this printing in total?
@1gambler18 4 жыл бұрын
Looks like a month of 3d printing all the pieces hahaha
@tokagehideto 4 жыл бұрын
4:57 Wait a minute! is that a hammer?... who are you?
@hansdegroot9300 4 жыл бұрын
It has to be fake a hammer and no spacers.
@mardoksan 4 жыл бұрын
And where is the magic saw?
@Volt64bolt 4 жыл бұрын
And at 4:20 and 6:09
@BlueSky_BlueSky 4 жыл бұрын
I was also shocked!
@guidomersmann9744 4 жыл бұрын
So it is all Fake. Itmwas to good to be true!
@thestaples89 4 жыл бұрын
Great build! Something you might want to consider is put tabs on the buttom of the parts so they dont come loose while the router is running, only problem is you will have to cut them after its done but it will keep the part from coming loose and hitting the router
@sausage5849 4 жыл бұрын
Awesome engineering skills you have there Ivan!
@DeusVultCult 4 жыл бұрын
Can we talk about the IKEA “drill” at 03:00?
@typer93 4 жыл бұрын
builds beautiful designed plans, makes a CNC machine, build a 3d printer, use an IKEA DRILL ...
@arttutorialsgd7679 4 жыл бұрын
Hey can you make another screw drive tank👌👍
@ivanmirandawastaken 4 жыл бұрын
Not yet... 🤔🤔
@notblackmagic158 4 жыл бұрын
Watch Colin Furze current project, he is building one!
@ivanmirandawastaken 4 жыл бұрын
I did build one too... (insert sad face...)
@notblackmagic158 4 жыл бұрын
@@ivanmirandawastaken I watched that video to :D Now that both of you are professional tank builders there needs to be a battle. Fireworks vs Nerf balls!
@Matt-wb7lm 4 жыл бұрын
New subscriber. Fantastic build. I love your engineering style, very neat and clean. Looking forward to watching your other vids. Keep up the good work.
@harelzilberman 4 жыл бұрын
you are amazing, very talented and the details.. great editing! thanks man
@radry100 4 жыл бұрын
belt driven cnc? not a good idea...
@ivanmirandawastaken 4 жыл бұрын
If all my bad ideas work this well... bring'em on!!!
@1pcfred 4 жыл бұрын
A crappy GRBL controller and unsupported thin aluminum frame rails are not the best either. But hey it works for him.
Sergio Outdoors
Рет қаралды 83 МЛН
Garena Free Fire Global
Рет қаралды 55 МЛН
Typecase
Рет қаралды 1,9 МЛН
Тима Бичевский
Рет қаралды 1,1 МЛН