3D Printed Dust Collection Upgrades / Improve workshop dust collection / Best free 3d print files

Рет қаралды 20,248

4 ай бұрын

If you want better dust collection in your workshop, you should use your 3d printer and print these stl files. I printed more than 50 hours of stl files and even designed some of my own. This video is a compilation of the ones that worked really well and are worth printing. I will show you parts that you can print that will impove your drill press dust collection, belt sander dust collection, router dust collection, blast gates, cyclones, and more. You won't believe how much more efficient dust collection can be. All of these prints are available for free including the parts that I created see the links below.
My Etsy Shop: etsy.me/3qgDnr8
Materials used:
CenTec Hose System: amzn.to/3vgRHbW
Weld On 16 (16 oz): amzn.to/3TmwGEB
Weld On 16: (5 oz): amzn.to/3wXfcXX
Metric Screw Kit: amzn.to/3SocmlH
Silicone Tape: amzn.to/49pk1r3
Cyclone: www.thingiverse.com/thing:282...
Cyclone Mounting Plate: www.thingiverse.com/thing:319...
Cen Tec and Ridgid Hose Adapters: www.thingiverse.com/thing:653...
Router Dust Collection: cults3d.com/en/3d-model/tool/...
Traditional Blast Gate: www.thingiverse.com/thing:342...
Ball Valve Blast Gate: www.printables.com/model/1377...
4 inch flex hose coupling: www.thingiverse.com/thing:536...
Threaded flex hose connector: www.thingiverse.com/thing:406...
Quick connect: www.printables.com/model/6150...
Quick Connect Adapter: www.thingiverse.com/thing:653...
4 inch dust shroud for oscillating sander: www.printables.com/model/2620...
2.5 inch dust shroud for oscillating sander: www.printables.com/model/1334...
Drill dust collector: www.thingiverse.com/thing:520...
Drill Press Dust Collection for Cen Tec Quick Connect: www.thingiverse.com/thing:653...
My Website: www.artisanmadethings.com/
Follow: / artisanmadethings

Пікірлер: 66

@johnd.4385 Ай бұрын

I’m a retired engineer and have been a woodworker for many years. I have done and redone dust collection facets many times over in my shop. I just bought a 3d printer for the purpose of learning a new craft and to supplement my woodworking. I am learning Fusion 360 and recently printed out my first object … a modified dust port for my Rikon bandsaw. I’m impressed with your video as well as your printing and design skills. And I’m grateful that you are generous and make your files available. Thank You ! John D.

@grayfaux_ 3 ай бұрын

As a designer I can confirm we use metric 100% of the time! Great Video!

@SUBtrauma 2 ай бұрын

The company I work for is international. 99% of our drawings have both on them : *)

@Daves3DProjects 4 ай бұрын

About five years ago, I put all my wood working tools away because I bought a 3D printer. In the last week I started getting them back out. What a dusty mess compared to a 3D printer. Then I ran across your video. Guess what I will be doing this weekend?!!? Thanks for the ideas!

@ArtisanMade 4 ай бұрын

Haha!! It’s all about having fun!

@TrinityFD 4 ай бұрын

I can relate to what you posted!!

@neilplumb1710 4 ай бұрын

Man, where has this been all my life. Thank you for putting this out, I bought a 3d printer specifically to solve dust collection issues.

@ArtisanMade 4 ай бұрын

3d printers are awesome. I feel like I can solve any problem with it.

@cackleberryfarm4598 4 ай бұрын

This was awesome!!! Thank you SOOOO much for doing it. I'm so glad to see some big sized prints. So many of the other videos on YT they just print little knick knack type things for the Shop. But these were SUPER large and fantastic to see!!! And also, thanks for making the files available for free so the community can enjoy them, AND, who knows, make improvements on them that will make something even better!!

@ArtisanMade 4 ай бұрын

Thank you!!

@mikedtubey 4 ай бұрын

Great stuff! Thank you for sharing!!!

@NWGR 4 ай бұрын

Definitely printing a few of these! Excellent series, keep it up!

@Maz-2393 2 ай бұрын

Found your channel by accident so now you have another subscriber! :) Great video!

@geirbyre 3 ай бұрын

Great video, man!🙌🏻

@marvinbrooks2601 4 ай бұрын

Thank you so much for the video and files. I didn’t have a system but now I will and this weekend I will be printing out

@beginnerswoodshop 4 ай бұрын

Great collection of prints! I definitely love that threaded insert, I’m going to print off a few of those and reclaim some hose clamps.

@Obtuse94 4 ай бұрын

Such an amazing video with so many solutions for exactly some of the dust collection issues I was running into. Thank you so much!

@rseletto 4 ай бұрын

Incredible restoration, you have an amazing collection of skills

@Dandroid61 4 ай бұрын

Good one! Printing the 4" screw end now!

@ArtisanMade 4 ай бұрын

I agree. that’s a clever idea

@andyb7754 4 ай бұрын

Very informative and interesting video, thank you. I don't do wood but a lot of my relatives do and if they want dust collection I'll make the parts for them. Thank you again for this very, very good video.

@riggsron 4 ай бұрын

Good video.

@UTubeGuyJK 4 ай бұрын

Very impressive :)

@0nkelsam 4 ай бұрын

The quick hose connectors look like those from the Bosch Professional GAS 18V 10, in which case you could have printed the cyclone from makerworld directly ^^

@ArtisanMade 4 ай бұрын

I will check it out. Thanks for sharing.

@Thomllama 4 ай бұрын

Cool, but probably would have used a different cyclone designed for the proper hoses! That is choking the vac for sure! I use 3D printing for vacs all over the shop! Both standard shop vac and also 4” dust collector stuff! So much better and easier than dealing with trying to find parts to get things to fit! As to pvc pipe seal, worked with central vac guys back in the day a lot doing construction, they all swear by electrical tape, cheaper/thinner is actually better!

@MrTapanes 4 ай бұрын

Dang, this was an excellent vid with so many great ideas! It looks like it, but just to make sure, you're using DWV PVC? You definitely earned my sub.

@ArtisanMade 4 ай бұрын

Thanks! PVC pipe, PETG Filament

@MrTapanes 4 ай бұрын

@@ArtisanMadeso sch40 PVC?

@ArtisanMade 4 ай бұрын

@@MrTapanes schedule 20

@chenderson5490 4 ай бұрын

You could play Ed O'Neill in his biopic.

@D-GatDesignsLLC 4 ай бұрын

Where did you get the scissor lift attached to your sander, that's bad ass

@ArtisanMade 4 ай бұрын

That is a motorcycle lift. On Amazon

@JShack01 4 ай бұрын

I only have a 210x210 print bed and not a 250x250 like yours. I've tried every trick I can think of but I just can't get that big quick connector with the handle to fit. I could shrink it, but that would just mean more adapters, right? I'll try to remix the design to make it fit my printer better. If it works out, I'll report back.

@ArtisanMade 4 ай бұрын

I barely got this on my bambù lab. Definitely a remix.

@uzitapuzzzi Ай бұрын

Great video!! I printed the Cyclone 🙂 Can u plz upload the stl files for "Cen Tec Hose Adapter" and 'Rigid Hose adapter"?

@ArtisanMade Ай бұрын

Thank you. The links for the files are in the description

@uzitapuzzzi Ай бұрын

@@ArtisanMade these two are missing :-(

@ArtisanMade Ай бұрын

@@uzitapuzzzi Thank you for letting me know. I fixed it. Here is the link: www.thingiverse.com/thing:6536791

@uzitapuzzzi Ай бұрын

@@ArtisanMade thank you!!! I really appreciate it

@mikedtubey 4 ай бұрын

Hey, I really like the things your making with your 3d printer. just curious are you still using the Ender 3 V2, I have a cnc machine and co2 laser, I have yet to invest in 3d printer but I think 2024 is the year that I will do so. do you like this 3d printer that your using or would you get a different make and model. I know a lot of 3d printers wont do all that you are doing out of the box, unless you modify them or upgrade them, at least that's what I read on the internet. are you making all that you make with a stock ender 3 v2? any other good info before i buy a 3 printer would be appreciated. thanks in advance!!!

@ArtisanMade 4 ай бұрын

Hello, i am using the bambù lab x1 carbon now. It is awesome. Very fast clean prints. No assembly. No tinkering. Just hit print and you get perfect prints almost every time

@mikedtubey 4 ай бұрын

thanks, ill look into bambù lab x1 i was looking at QIDI Tech, do you have just the printer or the combo with Automatic Material Station@@ArtisanMade

@6453bianchi 4 ай бұрын

Don’t u guys that woodwork use bags in your shop vacs? Such a game changer and cheap on Amazon.

@ArtisanMade 4 ай бұрын

I don’t think I can use a bag on my ridgid vac.

@Chris-vc1dh 3 ай бұрын

Probable whole spool of filament gone ?

@ArtisanMade 3 ай бұрын

maybe 2 spools for everything

@Chris-vc1dh 3 ай бұрын

@@ArtisanMade it will be cheaper to buy ready one

@djVania08 4 ай бұрын

How big is your printer? Print area I mean

@ArtisanMade 4 ай бұрын

I used the bambu lab x1. 25cm x 25cm. I don’t remember the height.

@John-NeverStopLearning 4 ай бұрын

What filament did you use???

@ArtisanMade 4 ай бұрын

Petg

@John-NeverStopLearning 4 ай бұрын

Thank you.

@Chris-vc1dh 3 ай бұрын

Can you share printer settings please?

@ArtisanMade 3 ай бұрын

settings are included with the files

@Chris-vc1dh 3 ай бұрын

@@ArtisanMade my cura says 1 day to print one half is it 12 or 24 hours?

@ArtisanMade 3 ай бұрын

@@Chris-vc1dh are you talking about the cyclone? Print time depends on infill percentage and what kind of printer you are using. I think was 700g of filament at 30% infill.

@Chris-vc1dh 3 ай бұрын

@@ArtisanMade yes cyclone, I have ender 3 pro

@steveh8724 3 ай бұрын

@@Chris-vc1dh 1 day = 24 hours

@youngplayboy786 4 ай бұрын

😅😐

@dfs7979 3 ай бұрын

Great tips. Most of your hose connections fit way too loose. You have a 3d printer… why are you not tweaking your models to fit before you print??

@ArtisanMade 3 ай бұрын

With the vacuum pressure they don’t move.

@ArtisanMade 3 ай бұрын

With the vacuum pressure they don’t move.

@steveh8724 3 ай бұрын

Interesting content thanks for sharing. Those 3D printed hose adapters look to be far to loose fitting to be useful. Need a tight press fit. Or if the connection is permanent just some epoxy.

@ArtisanMade 3 ай бұрын

Vacuum pressure keeps everything tight