3D printed

No video

3D printed

Рет қаралды 609

Күн бұрын

Enjoy building yours - it is so great - no longer believing in X/Y/Z. Do your own measurements.
The Printables are here: www.printables...
The BOSCH I´m using is the Bosch Go: amzn.to/3nGWajY
My Go-to for drone props etc.
What else you need:
1x HX711 24BIT-ADC-Modul ( amzn.to/3nFlUx8 ) - I use a 1kg! Choose yours
1x HX711 amplifier ( the one from the link above has one already included!)
1x Arduino - Nano / Uno ( amzn.to/40B709L ) - Nano
1x Display ( amzn.to/42YJIMx )
1x some wires ( amzn.to/40EBIic )
1x push button ( amzn.to/3m9FYHn )
1x On/Off switch ( amzn.to/40TomhR )
1x 5V Power Supply ( amzn.to/3GbZc6i )
1x Barrel plug ( amzn.to/3m0rPwa )
1x ESC ( amzn.to/3m3LWts ) - 30A is overkill but it is cheap
1x Motor ( amzn.to/3U3YoWy ) - 2205 - 2300kV as example
4x Motor screws, if your motor comes without screws!
1x some props ( amzn.to/3K4QS9p - amzn.to/3m2krk2 - etc )
1x servo tester ( amzn.to/3m08xXJ )
The Display is screwed in place with M3x10mm and a nut inside the box.
My HX711 has M4 and M5 threads, so I needed M4x16mm and M5x16mm to mount it.
You have to print at least the box, but I recomment also to print the protector. If you wanna test bigger Propeller, let me know and I can design you a bigger one.
If you are not familiar with writing your own code, you can use this one:
randomnerdtuto...
If you think I earned it, support me via Patreon:
/ dm4ds
C U in the next one
Sandor
DM4DS
My social Media Links:
Patreon: / dm4ds
Buy me a coffee: buymeacoff.ee/...
Paypal donation: paypal.me/dm4ds
Amazon Affiliate Link: amzn.to/31TI1FC
Epidemicsound: share.epidemic...
Twitter: / ham_dm4ds
Instagram: / dm4ds
www.printables...
Thangs: thangs.com/DM4DS
QRZ.com: www.qrz.com/lo...
Twitch: / dm4ds
Discord Server: / discord
Homepage: www.dm4ds.de/
Timemarkers:
00:00 Hello
00:30 what is it
01:15 pros are able to do
02:10 build one myself
03:05 questions?
03:29 QUIZZES for the 1000 Follower GIVEAWAY
04:25 Here it is
05:05 Explaining
05:10 DJI Action 2 rant
05:45 Explaining 2
08:00 the MAGIC
09:50 the precision
10:15 like my BOSCH
11:20 precision
12:25 pre-arming
13:10 adjusting Voltage
13:35 Two-Blade prop
14:40 Tri-Blade prop
16:32 Costs - parts
19:40 print yours
#3dprinting #drone #motor

Пікірлер: 3

@Qwarzz Жыл бұрын

Alright... seems I have my next electronics project decided. I feel like I'll probably use Arduino as PWM source to skip the servo tester. Might also have some current sensors in some box so could maybe automatically have the motor run at set current. I'll probably add all sort of unnecessary things to my project but the building part is what I'm mostly interested in. Getting to test props is just a bonus :)

@DM4DS Жыл бұрын

@Qwarzz - as current sensor I used in this first step my PSU as you can see - but I thought in the second step to upgrade to an ESC for all telemetry including Dshot RPM etc. Also about using the Arduino as PWM output or an RX in some kind for remote controlling. With all infos it´s easy to calculate efficency, torpque .....maybe upgrading to a bigger display tpp or read everything via serial to a software. Don´t wanted to make it too complicated in the first video, or some would be scared. Please share your project with the community, would be nice. all the best Sandor - DM4DS